fw-api: CL 20102421 - update fw common interface files (c1b7a128) · Commits · e / devices / android_kernel_fairphone_FP5

fw/htt.h

+56 −30

Original line number	Diff line number	Diff line
		@@ -235,9 +235,10 @@
		* 3.108 Add HTT_H2T_MSG_TYPE_UMAC_HANG_RECOVERY_PREREQUISITE_SETUP def.
		* 3.109 Add HTT_T2H RX_ADDBA_EXTN,RX_DELBA_EXTN defs.
		* 3.110 Add more word_mask fields in htt_tx_monitor_cfg_t.
		* 3.111 Add RXPCU filter enable flag in RX_RING_SELECTION_CFG msg.
		*/
		#define HTT_CURRENT_VERSION_MAJOR 3
		#define HTT_CURRENT_VERSION_MINOR 110
		#define HTT_CURRENT_VERSION_MINOR 111

		#define HTT_NUM_TX_FRAG_DESC 1024

		@@ -5535,38 +5536,43 @@ enum htt_srng_ring_id {
		*
		* The message would appear as follows:
		*
		* \|31 28\|27\|26\|25\|24\|23 16\|15 \| 11\| 10\|9 8\|7 0\|
		* \|-----+--+--+--+--+----------------+----+---+---+---+---------------\|
		* \|31 28\|27\|26\|25\|24\|23\|22\|21 19\|18 16\|15 \| 11\| 10\|9 8\|7 0\|
		* \|-----+--+--+--+--+-----------------+----+---+---+---+---------------\|
		* \|rsvd1\|DT\|OV\|PS\|SS\| ring_id \| pdev_id \| msg_type \|
		* \|-------------------------------------------------------------------\|
		* \| rsvd2 \| ring_buffer_size \|
		* \|-------------------------------------------------------------------\|
		* \|-----------------------+-----+-----+--------------------------------\|
		* \|rsvd2\|RX\|RXHDL\| CLD \| CLC \| CLM \| ring_buffer_size \|
		* \|--------------------------------------------------------------------\|
		* \| packet_type_enable_flags_0 \|
		* \|-------------------------------------------------------------------\|
		* \|--------------------------------------------------------------------\|
		* \| packet_type_enable_flags_1 \|
		* \|-------------------------------------------------------------------\|
		* \|--------------------------------------------------------------------\|
		* \| packet_type_enable_flags_2 \|
		* \|-------------------------------------------------------------------\|
		* \|--------------------------------------------------------------------\|
		* \| packet_type_enable_flags_3 \|
		* \|-------------------------------------------------------------------\|
		* \|--------------------------------------------------------------------\|
		* \| tlv_filter_in_flags \|
		* \|-------------------------------------------------------------------\|
		* \|-----------------------------------+--------------------------------\|
		* \| rx_header_offset \| rx_packet_offset \|
		* \|-------------------------------------------------------------------\|
		* \|-----------------------------------+--------------------------------\|
		* \| rx_mpdu_start_offset \| rx_mpdu_end_offset \|
		* \|-------------------------------------------------------------------\|
		* \|-----------------------------------+--------------------------------\|
		* \| rx_msdu_start_offset \| rx_msdu_end_offset \|
		* \|-------------------------------------------------------------------\|
		* \|-----------------------------------+--------------------------------\|
		* \| rsvd3 \| rx_attention_offset \|
		* \|-------------------------------------------------------------------\|
		* \|--------------------------------------------------------------------\|
		* \| rsvd4 \| mo\| fp\| rx_drop_threshold \|
		* \| \|ndp\|ndp\| \|
		* \|-------------------------------------------------------------------\|
		* \|--------------------------------------------------------------------\|
		* Where:
		* PS = pkt_swap
		* SS = status_swap
		* OV = rx_offsets_valid
		* DT = drop_thresh_valid
		* CLM = config_length_mgmt
		* CLC = config_length_ctrl
		* CLD = config_length_data
		* RXHDL = rx_hdr_len
		* RX = rxpcu_filter_enable_flag
		* The message is interpreted as follows:
		* dword0 - b'0:7 - msg_type: This will be set to
		* 0xc (HTT_H2T_MSG_TYPE_RX_RING_SELECTION_CFG)
		@@ -5620,7 +5626,15 @@ enum htt_srng_ring_id {
		* 10 - 128bytes
		* 11 - 256bytes
		* default - 128 bytes
		* b'27:31 - rsvd2: Reserved for future use
		* b'27 - rxpcu_filter_enable_flag
		* For Scan Radio Host CPU utilization is very high.
		* In order to reduce CPU utilization we need to filter out
		* certain configured MAC frames.
		* To filter out configured MAC address frames, RxPCU should
		* be zero which means allow all frames for MD at RxOLE
		* host wil fiter out frames.
		* RxPCU (Filter IN) -> RxOLE (Filter In/Filter Out)
		* b'28:31 - rsvd2: Reserved for future use
		* dword2 - b'0:31 - packet_type_enable_flags_0:
		* Enable MGMT packet from 0b0000 to 0b1001
		* bits from low to high: FP, MD, MO - 3 bits
		@@ -5759,7 +5773,8 @@ PREPACK struct htt_rx_ring_selection_cfg_t {
		config_length_ctrl:3,
		config_length_data:3,
		rx_hdr_len: 2,
		rsvd2: 5;
		rxpcu_filter_enable_flag:1,
		rsvd2: 4;
		A_UINT32 packet_type_enable_flags_0;
		A_UINT32 packet_type_enable_flags_1;
		A_UINT32 packet_type_enable_flags_2;
		@@ -5933,6 +5948,17 @@ PREPACK struct htt_rx_ring_selection_cfg_t {
		((_var) \|= ((_val) << HTT_RX_RING_SELECTION_CFG_RX_HDR_LEN_S));\
		} while(0)

		#define HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_M 0x08000000
		#define HTT_RX_RING_SELECTION_CFG_RXPXU_FILTER_S 27
		#define HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_GET(_var) \
		(((_var) & HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_M) >> \
		HTT_RX_RING_SELECTION_CFG_RXPXU_FILTER_S)
		#define HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL( HTT_RX_RING_SELECTION_CFG_RXPCU_FILTER, _val); \
		((_var) \|= ((_val) << HTT_RX_RING_SELECTION_CFG_RXPXU_FILTER_S));\
		} while(0)

		#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_M 0xffffffff
		#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_S 0
		#define HTT_RX_RING_SELECTION_CFG_PKT_TYPE_ENABLE_FLAG_0_GET(_var) \