Merge "ARM: dts: msm: Add pin controls for camera GPIOs" (c08acd76) · Commits · e / devices / android_kernel_fairphone_FP5

qcom/monaco-pinctrl.dtsi

+170 −0

Original line number	Diff line number	Diff line
		@@ -778,6 +778,176 @@
		};
		};

		cci0_suspend: cci0_suspend {
		mux {
		/* CLK, DATA*/
		pins = "gpio38", "gpio37";
		function = "cci_i2c";
		};

		config {
		pins = "gpio38", "gpio37";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cci0_active: cci0_active {
		mux {
		/* CLK, DATA*/
		pins = "gpio38", "gpio37";
		function = "cci_i2c";
		};

		config {
		pins = "gpio38", "gpio37";
		bias-pull-up; /* PULL UP*/
		drive-strength = <2>; /* 2 MA */
		};
		};

		cci1_suspend: cci1_suspend {
		mux {
		/* CLK, DATA*/
		pins = "gpio40", "gpio39";
		function = "cci_i2c";
		};

		config {
		pins = "gpio40", "gpio39";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cci1_active: cci1_active {
		mux {
		/* CLK, DATA*/
		pins = "gpio40", "gpio39";
		function = "cci_i2c";
		};

		config {
		pins = "gpio40", "gpio39";
		bias-pull-up; /* PULL UP*/
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk0_active: cam_sensor_mclk0_active {
		/* MCLK 0*/
		mux {
		pins = "gpio32";
		function = "cam_mclk";
		};

		config {
		pins = "gpio32";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk0_suspend: cam_sensor_mclk0_suspend {
		/* MCLK 0*/
		mux {
		pins = "gpio32";
		function = "cam_mclk";
		};

		config {
		pins = "gpio32";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk1_active: cam_sensor_mclk1_active {
		/* MCLK 1*/
		mux {
		pins = "gpio33";
		function = "cam_mclk";
		};

		config {
		pins = "gpio33";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk1_suspend: cam_sensor_mclk1_suspend {
		/* MCLK 1*/
		mux {
		pins = "gpio33";
		function = "cam_mclk";
		};

		config {
		pins = "gpio33";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear0_reset_active: cam_sensor_rear0_reset_active {
		/* RESET0 */
		mux {
		pins = "gpio35";
		function = "gpio";
		};

		config {
		pins = "gpio35";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear0_reset_suspend: cam_sensor_rear0_reset_suspend {
		/* RESET0 */
		mux {
		pins = "gpio35";
		function = "gpio";
		};

		config {
		pins = "gpio35";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		output-low;
		};
		};

		cam_sensor_front0_reset_active: cam_sensor_front0_reset_active {
		/* RESET0 */
		mux {
		pins = "gpio36";
		function = "gpio";
		};

		config {
		pins = "gpio36";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front0_reset_suspend: cam_sensor_front0_reset_suspend {
		/* RESET0 */
		mux {
		pins = "gpio36";
		function = "gpio";
		};

		config {
		pins = "gpio36";
		bias-pull-down; /* PULL DOWN */
		drive-strength = <2>; /* 2 MA */
		output-low;
		};
		};

		/* SDC pin type */
		sdc1_on: sdc1_on {
		clk {