Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit be8512aa authored by Zhenlin Lian's avatar Zhenlin Lian Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add camera sensor for qcs610 opk 

Add camera sensor IMX577, IMX415 for Turbox C610 openkit.

Change-Id: I817f13f07465387f8f839dc4a9dc293a806fc1b1
parent 9bce3bf0

qcs610-camera-sensor-opk.dtsi

0 → 100644
+207 −0
Original line number Diff line number Diff line 


&soc {

	camera0_dvig_ldo: gpio-regulator@0 {

		compatible = "regulator-fixed";

		reg = <0x00 0x00>;

		regulator-name = "camera0_dvig_ldo";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&tlmm 73 0>;

		vin-supply = <&pm6150l_s8>;

	};



	camera0_vana_ldo: gpio-regulator@1 {

		compatible = "regulator-fixed";

		reg = <0x01 0x00>;

		regulator-name = "camera0_vana_ldo";

		regulator-min-microvolt = <2850000>;

		regulator-max-microvolt = <2850000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&pm6150l_gpios 9 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam_sensor_0_vana_default>;

		vin-supply = <&pm6150l_bob>;

	};



	camera1_dvig_ldo: gpio-regulator@2 {

		compatible = "regulator-fixed";

		reg = <0x02 0x00>;

		regulator-name = "camera1_dvig_ldo";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&tlmm 74 0>;

		vin-supply = <&pm6150l_s8>;

	};



	camera1_vana_ldo: gpio-regulator@3 {

		compatible = "regulator-fixed";

		reg = <0x03 0x00>;

		regulator-name = "camera1_vana_ldo";

		regulator-min-microvolt = <2850000>;

		regulator-max-microvolt = <2850000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&pm6150l_gpios 8 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam_sensor_1_vana_default>;

		vin-supply = <&pm6150l_bob>;

	};



	camera2_vdig_ldo: gpio-regulator@4 {

		compatible = "regulator-fixed";

		reg = <0x04 0x00>;

		regulator-name = "camera2_vdig_ldo";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&tlmm 73 0>;

		vin-supply = <&pm6150l_s8>;

	};



	qcom,cam-res-mgr {

		compatible = "qcom,cam-res-mgr";

		status = "ok";

	};

};



&cam_cci {

	actuator_rear2: actuator@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		regulator-names = "cam_vaf";

		rgltr-min-voltage = <3800000>;

		rgltr-max-voltage = <3800000>;

		rgltr-load-current = <100000>;

		vin-supply = <&pm6150l_bob>;

		status = "ok";

	};



	qcom,cam-sensor@0 {

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		reg = <0x0>;

		csiphy-sd-index = <0>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_vio-supply = <&pm6150_l13>;

		cam_vana-supply = <&camera0_vana_ldo>;

		cam_vdig-supply = <&camera0_dvig_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2850000 1050000 0>;

		rgltr-max-voltage = <1800000 2850000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 28 0>,

			<&tlmm 47 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_vio-supply = <&pm6150_l13>;

		cam_vana-supply = <&camera1_vana_ldo>;

		cam_vdig-supply = <&camera1_dvig_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2850000 1050000 0>;

		rgltr-max-voltage = <1800000 2850000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 29 0>,

			<&tlmm 45 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@2 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		reg = <0x2>;

		csiphy-sd-index = <0>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		actuator-src = <&actuator_rear2>;

		cam_vio-supply = <&pm6150_l13>;

		cam_vana-supply = <&camera0_vana_ldo>;

		cam_vdig-supply = <&camera2_vdig_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2850000 1050000 0>;

		rgltr-max-voltage = <1800000 2850000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 28 0>,

			<&tlmm 47 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};