ARM: dts: imx: add Gateworks Ventana GW5600 support (b8a559fe) · Commits · e / devices / android_kernel_fairphone_FP5

arch/arm/boot/dts/Makefile

+2 −0

Original line number	Diff line number	Diff line
		@@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
		imx6dl-gw551x.dtb \
		imx6dl-gw552x.dtb \
		imx6dl-gw553x.dtb \
		imx6dl-gw560x.dtb \
		imx6dl-gw5903.dtb \
		imx6dl-gw5904.dtb \
		imx6dl-hummingboard.dtb \
		@@ -408,6 +409,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
		imx6q-gw551x.dtb \
		imx6q-gw552x.dtb \
		imx6q-gw553x.dtb \
		imx6q-gw560x.dtb \
		imx6q-gw5903.dtb \
		imx6q-gw5904.dtb \
		imx6q-h100.dtb \

arch/arm/boot/dts/imx6dl-gw560x.dts

0 → 100644

+55 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright 2017 Gateworks Corporation
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License as
		* published by the Free Software Foundation; either version 2 of
		* the License, or (at your option) any later version.
		*
		* This file is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* You should have received a copy of the GNU General Public
		* License along with this file; if not, write to the Free
		* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
		* MA 02110-1301 USA
		*
		* Or, alternatively,
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use,
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/

		/dts-v1/;
		#include "imx6dl.dtsi"
		#include "imx6qdl-gw560x.dtsi"

		/ {
		model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
		compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
		};

arch/arm/boot/dts/imx6q-gw560x.dts

0 → 100644

+59 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright 2017 Gateworks Corporation
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License as
		* published by the Free Software Foundation; either version 2 of
		* the License, or (at your option) any later version.
		*
		* This file is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* You should have received a copy of the GNU General Public
		* License along with this file; if not, write to the Free
		* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
		* MA 02110-1301 USA
		*
		* Or, alternatively,
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use,
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/

		/dts-v1/;
		#include "imx6q.dtsi"
		#include "imx6qdl-gw560x.dtsi"

		/ {
		model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
		compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
		};

		&sata {
		status = "okay";
		};

arch/arm/boot/dts/imx6qdl-gw560x.dtsi

0 → 100644

+749 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright 2017 Gateworks Corporation
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License as
		* published by the Free Software Foundation; either version 2 of
		* the License, or (at your option) any later version.
		*
		* This file is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* You should have received a copy of the GNU General Public
		* License along with this file; if not, write to the Free
		* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
		* MA 02110-1301 USA
		*
		* Or, alternatively,
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use,
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/

		#include <dt-bindings/gpio/gpio.h>
		#include <dt-bindings/input/input.h>

		/ {
		/* these are used by bootloader for disabling nodes */
		aliases {
		led0 = &led0;
		led1 = &led1;
		led2 = &led2;
		ssi0 = &ssi1;
		usb0 = &usbh1;
		usb1 = &usbotg;
		};

		chosen {
		stdout-path = &uart2;
		};

		backlight-display {
		compatible = "pwm-backlight";
		pwms = <&pwm4 0 5000000>;
		brightness-levels = <
		0 1 2 3 4 5 6 7 8 9
		10 11 12 13 14 15 16 17 18 19
		20 21 22 23 24 25 26 27 28 29
		30 31 32 33 34 35 36 37 38 39
		40 41 42 43 44 45 46 47 48 49
		50 51 52 53 54 55 56 57 58 59
		60 61 62 63 64 65 66 67 68 69
		70 71 72 73 74 75 76 77 78 79
		80 81 82 83 84 85 86 87 88 89
		90 91 92 93 94 95 96 97 98 99
		100
		>;
		default-brightness-level = <100>;
		};

		backlight-keypad {
		compatible = "gpio-backlight";
		gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
		default-on;
		};

		leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_leds>;

		led0: user1 {
		label = "user1";
		gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
		default-state = "on";
		linux,default-trigger = "heartbeat";
		};

		led1: user2 {
		label = "user2";
		gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
		default-state = "off";
		};

		led2: user3 {
		label = "user3";
		gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
		default-state = "off";
		};
		};

		memory@10000000 {
		reg = <0x10000000 0x40000000>;
		};

		pps {
		compatible = "pps-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pps>;
		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
		};

		reg_2p5v: regulator-2p5v {
		compatible = "regulator-fixed";
		regulator-name = "2P5V";
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
		regulator-always-on;
		};

		reg_3p3v: regulator-3p3v {
		compatible = "regulator-fixed";
		regulator-name = "3P3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		};

		reg_5p0v: regulator-5p0v {
		compatible = "regulator-fixed";
		regulator-name = "5P0V";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		};

		reg_12p0v: regulator-12p0v {
		compatible = "regulator-fixed";
		regulator-name = "12P0V";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		};

		reg_1p4v: regulator-vddsoc {
		compatible = "regulator-fixed";
		regulator-name = "vdd_soc";
		regulator-min-microvolt = <1400000>;
		regulator-max-microvolt = <1400000>;
		regulator-always-on;
		};

		reg_usb_h1_vbus: regulator-usb-h1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb_h1_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		};

		reg_usb_otg_vbus: regulator-usb-otg-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb_otg_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		};

		sound {
		compatible = "fsl,imx6q-ventana-sgtl5000",
		"fsl,imx-audio-sgtl5000";
		model = "sgtl5000-audio";
		ssi-controller = <&ssi1>;
		audio-codec = <&sgtl5000>;
		audio-routing =
		"MIC_IN", "Mic Jack",
		"Mic Jack", "Mic Bias",
		"Headphone Jack", "HP_OUT";
		mux-int-port = <1>;
		mux-ext-port = <4>;
		};
		};

		&audmux {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_audmux>;
		status = "okay";
		};

		&ecspi3 {
		cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ecspi3>;
		status = "okay";
		};

		&can1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_flexcan>;
		status = "okay";
		};

		&clks {
		assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
		<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
		assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
		<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
		};

		&fec {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_enet>;
		phy-mode = "rgmii-id";
		phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
		status = "okay";
		};

		&hdmi {
		ddc-i2c-bus = <&i2c3>;
		status = "okay";
		};

		&i2c1 {
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c1>;
		status = "okay";

		eeprom1: eeprom@50 {
		compatible = "atmel,24c02";
		reg = <0x50>;
		pagesize = <16>;
		};

		eeprom2: eeprom@51 {
		compatible = "atmel,24c02";
		reg = <0x51>;
		pagesize = <16>;
		};

		eeprom3: eeprom@52 {
		compatible = "atmel,24c02";
		reg = <0x52>;
		pagesize = <16>;
		};

		eeprom4: eeprom@53 {
		compatible = "atmel,24c02";
		reg = <0x53>;
		pagesize = <16>;
		};

		pca9555: gpio@23 {
		compatible = "nxp,pca9555";
		reg = <0x23>;
		gpio-controller;
		#gpio-cells = <2>;
		};

		ds1672: rtc@68 {
		compatible = "dallas,ds1672";
		reg = <0x68>;
		};
		};

		&i2c2 {
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c2>;
		status = "okay";

		sgtl5000: codec@a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		clocks = <&clks IMX6QDL_CLK_CKO>;
		VDDA-supply = <&reg_1p8v>;
		VDDIO-supply = <&reg_3p3v>;
		};

		tca8418: keypad@34 {
		compatible = "ti,tca8418";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_keypad>;
		reg = <0x34>;
		interrupt-parent = <&gpio5>;
		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
		linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
		MATRIX_KEY(0x00, 0x00, BTN_1)
		MATRIX_KEY(0x01, 0x01, BTN_2)
		MATRIX_KEY(0x01, 0x00, BTN_3)
		MATRIX_KEY(0x02, 0x00, BTN_4)
		MATRIX_KEY(0x00, 0x03, BTN_5)
		MATRIX_KEY(0x00, 0x02, BTN_6)
		MATRIX_KEY(0x01, 0x03, BTN_7)
		MATRIX_KEY(0x01, 0x02, BTN_8)
		MATRIX_KEY(0x02, 0x02, BTN_9)
		>;
		keypad,num-rows = <4>;
		keypad,num-columns = <4>;
		};

		ltc3676: pmic@3c {
		compatible = "lltc,ltc3676";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pmic>;
		reg = <0x3c>;
		interrupt-parent = <&gpio1>;
		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;

		regulators {
		/* VDD_DDR (1+R1/R2 = 2.105) */
		reg_vdd_ddr: sw2 {
		regulator-name = "vddddr";
		regulator-min-microvolt = <868310>;
		regulator-max-microvolt = <1684000>;
		lltc,fb-voltage-divider = <221000 200000>;
		regulator-ramp-delay = <7000>;
		regulator-boot-on;
		regulator-always-on;
		};

		/* VDD_ARM (1+R1/R2 = 1.931) */
		reg_vdd_arm: sw3 {
		regulator-name = "vddarm";
		regulator-min-microvolt = <796551>;
		regulator-max-microvolt = <1544827>;
		lltc,fb-voltage-divider = <243000 261000>;
		regulator-ramp-delay = <7000>;
		regulator-boot-on;
		regulator-always-on;
		linux,phandle = <&reg_vdd_arm>;
		};

		/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
		reg_1p8v: sw4 {
		regulator-name = "vdd1p8";
		regulator-min-microvolt = <1033310>;
		regulator-max-microvolt = <2004000>;
		lltc,fb-voltage-divider = <301000 200000>;
		regulator-ramp-delay = <7000>;
		regulator-boot-on;
		regulator-always-on;
		};

		/* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
		reg_1p0v: ldo2 {
		regulator-name = "vdd1p0";
		regulator-min-microvolt = <950000>;
		regulator-max-microvolt = <1050000>;
		lltc,fb-voltage-divider = <78700 200000>;
		regulator-boot-on;
		regulator-always-on;
		};

		/* VDD_AUD_1P8: Audio codec */
		reg_aud_1p8v: ldo3 {
		regulator-name = "vdd1p8a";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-boot-on;
		};

		/* VDD_HIGH (1+R1/R2 = 4.17) */
		reg_3p0v: ldo4 {
		regulator-name = "vdd3p0";
		regulator-min-microvolt = <3023250>;
		regulator-max-microvolt = <3023250>;
		lltc,fb-voltage-divider = <634000 200000>;
		regulator-boot-on;
		regulator-always-on;
		};
		};
		};
		};

		&i2c3 {
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c3>;
		status = "okay";

		egalax_ts: touchscreen@4 {
		compatible = "eeti,egalax_ts";
		reg = <0x04>;
		interrupt-parent = <&gpio5>;
		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
		wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
		};
		};

		&ldb {
		fsl,dual-channel;
		status = "okay";

		lvds-channel@0 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <18>;
		status = "okay";

		display-timings {
		native-mode = <&timing0>;
		timing0: hsd100pxn1 {
		clock-frequency = <65000000>;
		hactive = <1024>;
		vactive = <768>;
		hback-porch = <220>;
		hfront-porch = <40>;
		vback-porch = <21>;
		vfront-porch = <7>;
		hsync-len = <60>;
		vsync-len = <10>;
		};
		};
		};
		};

		&pcie {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pcie>;
		reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
		status = "okay";
		};

		&pwm2 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
		status = "disabled";
		};

		&pwm3 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
		status = "disabled";
		};

		&pwm4 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwm4>;
		status = "okay";
		};

		&ssi1 {
		status = "okay";
		};

		&uart1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart1>;
		uart-has-rtscts;
		rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
		status = "okay";
		};

		&uart2 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart2>;
		status = "okay";
		};

		&uart5 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart5>;
		status = "okay";
		};

		&usbotg {
		vbus-supply = <&reg_usb_otg_vbus>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbotg>;
		disable-over-current;
		status = "okay";
		};

		&usbh1 {
		vbus-supply = <&reg_usb_h1_vbus>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbh1>;
		status = "okay";
		};

		&usdhc2 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc2>;
		bus-width = <8>;
		vmmc-supply = <&reg_3p3v>;
		non-removable;
		status = "okay";
		};

		&usdhc3 {
		pinctrl-names = "default", "state_100mhz", "state_200mhz";
		pinctrl-0 = <&pinctrl_usdhc3>;
		pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
		pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
		cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
		vmmc-supply = <&reg_3p3v>;
		status = "okay";
		};

		&wdog1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_wdog>;
		fsl,ext-reset-output;
		};

		&iomuxc {
		pinctrl_audmux: audmuxgrp {
		fsl,pins = <
		/* AUD4 */
		MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
		MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
		MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
		MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
		MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
		/* AUD6 */
		MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
		MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
		MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
		MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
		>;
		};

		pinctrl_ecspi3: escpi3grp {
		fsl,pins = <
		MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
		MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
		MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
		MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
		>;
		};

		pinctrl_enet: enetgrp {
		fsl,pins = <
		MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
		MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
		MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
		MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
		MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
		MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
		MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
		MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
		MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
		MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
		MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
		MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
		MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
		MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
		MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
		MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
		MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
		>;
		};

		pinctrl_flexcan: flexcangrp {
		fsl,pins = <
		MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
		MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
		MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
		>;
		};

		pinctrl_gpio_leds: gpioledsgrp {
		fsl,pins = <
		MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
		MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
		MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
		>;
		};

		pinctrl_i2c1: i2c1grp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
		MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
		>;
		};

		pinctrl_i2c2: i2c2grp {
		fsl,pins = <
		MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
		MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
		>;
		};

		pinctrl_i2c3: i2c3grp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
		MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
		MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */
		MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */
		MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */
		>;
		};

		pinctrl_keypad: keypadgrp {
		fsl,pins = <
		MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */
		MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */
		>;
		};

		pinctrl_pcie: pciegrp {
		fsl,pins = <
		MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */
		MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */
		>;
		};

		pinctrl_pmic: pmicgrp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
		>;
		};

		pinctrl_pps: ppsgrp {
		fsl,pins = <
		MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
		>;
		};

		pinctrl_pwm2: pwm2grp {
		fsl,pins = <
		MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
		>;
		};

		pinctrl_pwm3: pwm3grp {
		fsl,pins = <
		MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
		>;
		};

		pinctrl_pwm4: pwm4grp {
		fsl,pins = <
		MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
		>;
		};

		pinctrl_uart1: uart1grp {
		fsl,pins = <
		MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
		MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
		MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
		>;
		};

		pinctrl_uart2: uart2grp {
		fsl,pins = <
		MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
		MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
		>;
		};

		pinctrl_uart5: uart5grp {
		fsl,pins = <
		MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
		MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
		>;
		};

		pinctrl_usbh1: usbh1grp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */
		>;
		};

		pinctrl_usbotg: usbotggrp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
		MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
		MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
		>;
		};

		pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
		MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
		MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
		MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
		MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
		MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
		MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
		MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9
		MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9
		MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9
		MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9
		>;
		};

		pinctrl_usdhc3: usdhc3grp {
		fsl,pins = <
		MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
		MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
		MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
		MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
		MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
		MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
		MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
		MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
		>;
		};

		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
		fsl,pins = <
		MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
		MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
		MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
		MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
		MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
		MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
		MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
		MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
		>;
		};

		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
		fsl,pins = <
		MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
		MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
		MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
		MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
		MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
		MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
		MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
		MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
		>;
		};

		pinctrl_wdog: wdoggrp {
		fsl,pins = <
		MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
		>;
		};
		};