chelsio: the return statement is not a function (b7d58394) · Commits · e / devices / android_kernel_fairphone_FP5

drivers/net/chelsio/my3126.c

+8 −8

Original line number	Diff line number	Diff line
		@@ -10,25 +10,25 @@ static int my3126_reset(struct cphy *cphy, int wait)
		* This can be done through registers. It is not required since
		* a full chip reset is used.
		*/
		return (0);
		return 0;
		}

		static int my3126_interrupt_enable(struct cphy *cphy)
		{
		schedule_delayed_work(&cphy->phy_update, HZ/30);
		t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
		return (0);
		return 0;
		}

		static int my3126_interrupt_disable(struct cphy *cphy)
		{
		cancel_rearming_delayed_work(&cphy->phy_update);
		return (0);
		return 0;
		}

		static int my3126_interrupt_clear(struct cphy *cphy)
		{
		return (0);
		return 0;
		}

		#define OFFSET(REG_ADDR) (REG_ADDR << 2)
		@@ -102,7 +102,7 @@ static void my3216_poll(struct work_struct *work)

		static int my3126_set_loopback(struct cphy *cphy, int on)
		{
		return (0);
		return 0;
		}

		/* To check the activity LED */
		@@ -146,7 +146,7 @@ static int my3126_get_link_status(struct cphy *cphy,
		if (fc)
		*fc = PAUSE_RX \| PAUSE_TX;

		return (0);
		return 0;
		}

		static void my3126_destroy(struct cphy *cphy)
		@@ -177,7 +177,7 @@ static struct cphy my3126_phy_create(adapter_t adapter,
		INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
		cphy->bmsr = 0;

		return (cphy);
		return cphy;
		}

		/* Chip Reset */
		@@ -198,7 +198,7 @@ static int my3126_phy_reset(adapter_t * adapter)
		val \|= 0x8000;
		t1_tpi_write(adapter, A_ELMER0_GPO, val);
		udelay(100);
		return (0);
		return 0;
		}

		struct gphy t1_my3126_ops = {

+6 −6

Original line number	Diff line number	Diff line
		@@ -286,7 +286,7 @@ static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
		else if((result & (1<<26)) != 0x0)
		CH_ERR("bist write error: 0x%x\n", result);

		return(0);
		return 0;
		}

		static int run_bist(adapter_t *adapter, int moduleid)
		@@ -295,7 +295,7 @@ static int run_bist(adapter_t *adapter, int moduleid)
		(void) bist_wr(adapter,moduleid, 0x00, 0x02);
		(void) bist_wr(adapter,moduleid, 0x01, 0x01);

		return(0);
		return 0;
		}

		static int check_bist(adapter_t *adapter, int moduleid)
		@@ -309,14 +309,14 @@ static int check_bist(adapter_t *adapter, int moduleid)
		if ((result & 3) != 0x3)
		CH_ERR("Result: 0x%x BIST error in ram %d, column: 0x%04x\n",
		result, moduleid, column);
		return(0);
		return 0;
		}

		static int enable_mem(adapter_t *adapter, int moduleid)
		{
		/enable mem/
		(void) bist_wr(adapter,moduleid, 0x00, 0x00);
		return(0);
		return 0;
		}

		static int run_bist_all(adapter_t *adapter)
		@@ -358,7 +358,7 @@ static int run_bist_all(adapter_t *adapter)
		udelay(300);
		vsc_write(adapter, REG_MEM_BIST, 0x0);
		mdelay(10);
		return(0);
		return 0;
		}

		static int mac_intr_handler(struct cmac *mac)