Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit adc1cd25 authored by Jishnu Prakash's avatar Jishnu Prakash
Browse files

dt-bindings: backlight: Update qcom-spmi-wled DT bindings 

Add IIO properties io-channels and io-channel-names, which may
be used for WLED to read QG channels. While at it, remove usage
of PMIC revid.

Change-Id: Ib8503190f0012b85016231d9697c65407ac01a47
parent 4bc5faf5

bindings/leds/backlight/qcom-spmi-wled.txt

+20 −5
Original line number Diff line number Diff line
@@ -138,11 +138,6 @@ platforms. The PMIC is connected to the host processor via SPMI bus. 
		    3 - External signal (e.g. LPG) is used for dimming

		    This property is applicable only to WLED5 peripheral.



- qcom,pmic-revid

	Usage:      optional

	Value type: <phandle>

	Definition: If specified, can be used to get PMIC revision information.



- qcom,leds-per-string

	Usage:      optional

	Value type: <u32>
@@ -150,6 +145,18 @@ platforms. The PMIC is connected to the host processor via SPMI bus. 
		    during selfie flash operation. If not specified, available

		    current calculated is simply the configured threshold.



- io-channels

	Usage:      optional

	Value type: <phandle-array>

	Definition: IIO channel specifiers for each name in io-channel-names.



- io-channel-names

	Usage:      optional

	Value type: <string-array>

	Definition: Names of the IIO channels that are used by WLED.

		        For details about IIO bindings see:

			    Documentation/devicetree/bindings/iio/iio-bindings.txt



Following properties are for child subnodes that are needed for WLED preflash

(or torch), flash and switch. These child subnodes can be specified only for

PMICs that has WLED5 (e.g. PM8150L).
@@ -271,6 +278,14 @@ qcom-wled@d800 { 
	interrupt-names = "ovp-irq";

	qcom,string-cfg = <7>;



	io-channels = <&pm7250b_qg PSY_IIO_RESISTANCE>,

		<&pm7250b_qg PSY_IIO_VOLTAGE_OCV>,

		<&pm7250b_qg PSY_IIO_CURRENT_NOW>;



	io-channel-names = "rbatt",

		"voltage_ocv",

		"current_now";



	wled_torch: qcom,wled-torch {

		label = "torch";

		qcom,wled-torch-fsc = <40>;