Loading bindings/input/qcom-hv-haptics.txt +14 −0 Original line number Diff line number Diff line Loading @@ -119,6 +119,20 @@ Properties: haptics ISC (short circuit current) config during LRA impedance detection. - qcom,hpwr-supply: Usage: optional Value type: <phandle> Definition: Phandle of the regulator device that supplies power for haptics module. This is needed when haptics module is supplied by non-HBoost regulator. - qcom,hpwr-voltage-mv: Usage: optional Value type: <u32> Definition: Specify the voltage level in mv unit requested from the non-HBoost regulator. When BoB regulator is used, the requested voltage shouldn't be higher than 4000 mV. The following properties are only required when LRA actuator is used: - qcom,lra-period-us: Loading Loading
bindings/input/qcom-hv-haptics.txt +14 −0 Original line number Diff line number Diff line Loading @@ -119,6 +119,20 @@ Properties: haptics ISC (short circuit current) config during LRA impedance detection. - qcom,hpwr-supply: Usage: optional Value type: <phandle> Definition: Phandle of the regulator device that supplies power for haptics module. This is needed when haptics module is supplied by non-HBoost regulator. - qcom,hpwr-voltage-mv: Usage: optional Value type: <u32> Definition: Specify the voltage level in mv unit requested from the non-HBoost regulator. When BoB regulator is used, the requested voltage shouldn't be higher than 4000 mV. The following properties are only required when LRA actuator is used: - qcom,lra-period-us: Loading
