Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a48b2362 authored by Svetlana Orlik's avatar Svetlana Orlik Committed by Greg Kroah-Hartman
Browse files

staging: iio: accel: adis16203: Fix 'line over 80 characters' warning 



Many of the comments in the same lines with #define
caused checkpatch warning 'line over 80 characters'.

Move all such comments to line before #define.
This style is already used in some other .h files in accel:

Add blank lines after #define to improve readability.

Signed-off-by: default avatarSvetlana Orlik <sveta.orlik.code@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 81da8a89

drivers/staging/iio/accel/adis16203.h

+99 −33
Original line number Diff line number Diff line
@@ -3,45 +3,111 @@ 


#define ADIS16203_STARTUP_DELAY	220 /* ms */



#define ADIS16203_FLASH_CNT      0x00 /* Flash memory write count */

#define ADIS16203_SUPPLY_OUT     0x02 /* Output, power supply */

#define ADIS16203_AUX_ADC        0x08 /* Output, auxiliary ADC input */

#define ADIS16203_TEMP_OUT       0x0A /* Output, temperature */

#define ADIS16203_XINCL_OUT      0x0C /* Output, x-axis inclination */

#define ADIS16203_YINCL_OUT      0x0E /* Output, y-axis inclination */

#define ADIS16203_INCL_NULL      0x18 /* Incline null calibration */

#define ADIS16203_ALM_MAG1       0x20 /* Alarm 1 amplitude threshold */

#define ADIS16203_ALM_MAG2       0x22 /* Alarm 2 amplitude threshold */

#define ADIS16203_ALM_SMPL1      0x24 /* Alarm 1, sample period */

#define ADIS16203_ALM_SMPL2      0x26 /* Alarm 2, sample period */

#define ADIS16203_ALM_CTRL       0x28 /* Alarm control */

#define ADIS16203_AUX_DAC        0x30 /* Auxiliary DAC data */

#define ADIS16203_GPIO_CTRL      0x32 /* General-purpose digital input/output control */

#define ADIS16203_MSC_CTRL       0x34 /* Miscellaneous control */

#define ADIS16203_SMPL_PRD       0x36 /* Internal sample period (rate) control */

#define ADIS16203_AVG_CNT        0x38 /* Operation, filter configuration */

#define ADIS16203_SLP_CNT        0x3A /* Operation, sleep mode control */

#define ADIS16203_DIAG_STAT      0x3C /* Diagnostics, system status register */

#define ADIS16203_GLOB_CMD       0x3E /* Operation, system command register */

/* Flash memory write count */

#define ADIS16203_FLASH_CNT      0x00



/* Output, power supply */

#define ADIS16203_SUPPLY_OUT     0x02



/* Output, auxiliary ADC input */

#define ADIS16203_AUX_ADC        0x08



/* Output, temperature */

#define ADIS16203_TEMP_OUT       0x0A



/* Output, x-axis inclination */

#define ADIS16203_XINCL_OUT      0x0C



/* Output, y-axis inclination */

#define ADIS16203_YINCL_OUT      0x0E



/* Incline null calibration */

#define ADIS16203_INCL_NULL      0x18



/* Alarm 1 amplitude threshold */

#define ADIS16203_ALM_MAG1       0x20



/* Alarm 2 amplitude threshold */

#define ADIS16203_ALM_MAG2       0x22



/* Alarm 1, sample period */

#define ADIS16203_ALM_SMPL1      0x24



/* Alarm 2, sample period */

#define ADIS16203_ALM_SMPL2      0x26



/* Alarm control */

#define ADIS16203_ALM_CTRL       0x28



/* Auxiliary DAC data */

#define ADIS16203_AUX_DAC        0x30



/* General-purpose digital input/output control */

#define ADIS16203_GPIO_CTRL      0x32



/* Miscellaneous control */

#define ADIS16203_MSC_CTRL       0x34



/* Internal sample period (rate) control */

#define ADIS16203_SMPL_PRD       0x36



/* Operation, filter configuration */

#define ADIS16203_AVG_CNT        0x38



/* Operation, sleep mode control */

#define ADIS16203_SLP_CNT        0x3A



/* Diagnostics, system status register */

#define ADIS16203_DIAG_STAT      0x3C



/* Operation, system command register */

#define ADIS16203_GLOB_CMD       0x3E



/* MSC_CTRL */

#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST	BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */

#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN	BIT(9)  /* Reverses rotation of both inclination outputs */

#define ADIS16203_MSC_CTRL_SELF_TEST_EN	        BIT(8)  /* Self-test enable */

#define ADIS16203_MSC_CTRL_DATA_RDY_EN	        BIT(2)  /* Data-ready enable: 1 = enabled, 0 = disabled */

#define ADIS16203_MSC_CTRL_ACTIVE_HIGH	        BIT(1)  /* Data-ready polarity: 1 = active high, 0 = active low */

#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1	BIT(0)  /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */



/* Self-test at power-on: 1 = disabled, 0 = enabled */

#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST	BIT(10)



/* Reverses rotation of both inclination outputs */

#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN	BIT(9)



/* Self-test enable */

#define ADIS16203_MSC_CTRL_SELF_TEST_EN	        BIT(8)



/* Data-ready enable: 1 = enabled, 0 = disabled */

#define ADIS16203_MSC_CTRL_DATA_RDY_EN	        BIT(2)



/* Data-ready polarity: 1 = active high, 0 = active low */

#define ADIS16203_MSC_CTRL_ACTIVE_HIGH	        BIT(1)



/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */

#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1	BIT(0)



/* DIAG_STAT */

#define ADIS16203_DIAG_STAT_ALARM2        BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */

#define ADIS16203_DIAG_STAT_ALARM1        BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */

#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */

#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT      3 /* SPI communications failure */

#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT     2 /* Flash update failure */

#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1 /* Power supply above 3.625 V */

#define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0 /* Power supply below 3.15 V */



/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */

#define ADIS16203_DIAG_STAT_ALARM2        BIT(9)



/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */

#define ADIS16203_DIAG_STAT_ALARM1        BIT(8)



/* Self-test diagnostic error flag */

#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5



/* SPI communications failure */

#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT      3



/* Flash update failure */

#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT     2



/* Power supply above 3.625 V */

#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1



/* Power supply below 3.15 V */

#define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0



/* GLOB_CMD */



#define ADIS16203_GLOB_CMD_SW_RESET	BIT(7)

#define ADIS16203_GLOB_CMD_CLEAR_STAT	BIT(4)

#define ADIS16203_GLOB_CMD_FACTORY_CAL	BIT(1)