ARM: dts: Add dts file for S3C6410-based Mini6410 board

	ste-ccu8540.dtb \

	ste-ccu9540.dtb

dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb

dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb

dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \

	emev2-kzm9d-reference.dtb \

	r8a7740-armadillo800eva.dtb \

/*

 * Samsung's S3C6410 based Mini6410 board device tree source

 *

 * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>

 *

 * Device tree source file for FriendlyARM Mini6410 board which is based on

 * Samsung's S3C6410 SoC.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

*/

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include "s3c6410.dtsi"

/ {

	model = "FriendlyARM Mini6410 board based on S3C6410";

	compatible = "friendlyarm,mini6410", "samsung,s3c6410";

	memory {

		reg = <0x50000000 0x10000000>;

	};

	chosen {

		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";

	};

	clocks {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;

		fin_pll: oscillator@0 {

			compatible = "fixed-clock";

			reg = <0>;

			clock-frequency = <12000000>;

			clock-output-names = "fin_pll";

			#clock-cells = <0>;

		};

		xusbxti: oscillator@1 {

			compatible = "fixed-clock";

			reg = <1>;

			clock-output-names = "xusbxti";

			clock-frequency = <48000000>;

			#clock-cells = <0>;

		};

	};

	srom-cs1@18000000 {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <1>;

		reg = <0x18000000 0x8000000>;

		ranges;

		ethernet@18000000 {

			compatible = "davicom,dm9000";

			reg = <0x18000000 0x2 0x18000004 0x2>;

			interrupt-parent = <&gpn>;

			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;

			davicom,no-eeprom;

		};

	};

	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&gpio_keys>;

		autorepeat;

		button-k1 {

			label = "K1";

			gpios = <&gpn 0 GPIO_ACTIVE_LOW>;

			linux,code = <2>;

			debounce-interval = <20>;

		};

		button-k2 {

			label = "K2";

			gpios = <&gpn 1 GPIO_ACTIVE_LOW>;

			linux,code = <3>;

			debounce-interval = <20>;

		};

		button-k3 {

			label = "K3";

			gpios = <&gpn 2 GPIO_ACTIVE_LOW>;

			linux,code = <4>;

			debounce-interval = <20>;

		};

		button-k4 {

			label = "K4";

			gpios = <&gpn 3 GPIO_ACTIVE_LOW>;

			linux,code = <5>;

			debounce-interval = <20>;

		};

		button-k5 {

			label = "K5";

			gpios = <&gpn 4 GPIO_ACTIVE_LOW>;

			linux,code = <6>;

			debounce-interval = <20>;

		};

		button-k6 {

			label = "K6";

			gpios = <&gpn 5 GPIO_ACTIVE_LOW>;

			linux,code = <7>;

			debounce-interval = <20>;

		};

		button-k7 {

			label = "K7";

			gpios = <&gpl 11 GPIO_ACTIVE_LOW>;

			linux,code = <8>;

			debounce-interval = <20>;

		};

		button-k8 {

			label = "K8";

			gpios = <&gpl 12 GPIO_ACTIVE_LOW>;

			linux,code = <9>;

			debounce-interval = <20>;

		};

	};

	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&gpio_leds>;

		led-1 {

			label = "LED1";

			gpios = <&gpk 4 GPIO_ACTIVE_LOW>;

			linux,default-trigger = "heartbeat";

		};

		led-2 {

			label = "LED2";

			gpios = <&gpk 5 GPIO_ACTIVE_LOW>;

			linux,default-trigger = "mmc0";

		};

		led-3 {

			label = "LED3";

			gpios = <&gpk 6 GPIO_ACTIVE_LOW>;

		};

		led-4 {

			label = "LED4";

			gpios = <&gpk 7 GPIO_ACTIVE_LOW>;

		};

	};

	buzzer {

		compatible = "pwm-beeper";

		pwms = <&pwm 0 1000000 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&pwm0_out>;

	};

};

&sdhci0 {

	pinctrl-names = "default";

	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;

	bus-width = <4>;

	status = "okay";

};

&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_data>;

	status = "okay";

};

&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;

	status = "okay";

};

&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart2_data>;

	status = "okay";

};

&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_data>;

	status = "okay";

};

&pwm {

	status = "okay";

};

&pinctrl0 {

	gpio_leds: gpio-leds {

		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";

		samsung,pin-pud = <PIN_PULL_NONE>;

	};

	gpio_keys: gpio-keys {

		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",

				"gpn-4", "gpn-5", "gpl-11", "gpl-12";

		samsung,pin-pud = <PIN_PULL_NONE>;

	};

};

&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_bus>;

	status = "okay";

	eeprom@50 {

		compatible = "atmel,24c08";

		reg = <0x50>;

		pagesize = <16>;

	};

};