Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a29de31b authored by Chunfeng Yun's avatar Chunfeng Yun Committed by Greg Kroah-Hartman
Browse files

usb: mtu3: Super-Speed Peripheral mode support 



add super-speed funtion for peripheral mode

Signed-off-by: default avatarChunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent df2069ac

drivers/usb/mtu3/mtu3.h

+11 −2
Original line number Diff line number Diff line
@@ -53,6 +53,7 @@ struct mtu3_request; 
#define USB_QMU_TQSAR(epnum)	(U3D_TXQSAR1 + (((epnum) - 1) * 0x10))

#define USB_QMU_TQCPR(epnum)	(U3D_TXQCPR1 + (((epnum) - 1) * 0x10))



#define SSUSB_U3_CTRL(p)	(U3D_SSUSB_U3_CTRL_0P + ((p) * 0x08))

#define SSUSB_U2_CTRL(p)	(U3D_SSUSB_U2_CTRL_0P + ((p) * 0x08))



#define MTU3_DRIVER_NAME	"mtu3"
@@ -63,6 +64,7 @@ struct mtu3_request; 
#define MTU3_EP_WEDGE		BIT(2)

#define MTU3_EP_BUSY		BIT(3)



#define MTU3_U3_IP_SLOT_DEFAULT 2

#define MTU3_U2_IP_SLOT_DEFAULT 1



/**
@@ -87,6 +89,7 @@ enum mtu3_speed { 
	MTU3_SPEED_INACTIVE = 0,

	MTU3_SPEED_FULL = 1,

	MTU3_SPEED_HIGH = 3,

	MTU3_SPEED_SUPER = 4,

};



/**
@@ -190,6 +193,7 @@ struct mtu3_ep { 


	struct list_head req_list;

	struct mtu3_gpd_ring gpd_ring;

	const struct usb_ss_ep_comp_descriptor *comp_desc;

	const struct usb_endpoint_descriptor *desc;



	int flags;
@@ -208,7 +212,8 @@ struct mtu3_request { 


/**

 * struct mtu3 - device driver instance data.

 * @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP

 * @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP only,

 *		MTU3_U3_IP_SLOT_DEFAULT for U3 IP

 * @may_wakeup: means device's remote wakeup is enabled

 * @is_self_powered: is reported in device status and the config descriptor

 * @ep0_req: dummy request used while handling standard USB requests
@@ -242,12 +247,16 @@ struct mtu3 { 
	struct usb_gadget_driver *gadget_driver;

	struct mtu3_request ep0_req;

	u8 setup_buf[EP0_RESPONSE_BUF];

	u32 max_speed;



	unsigned is_active:1;

	unsigned may_wakeup:1;

	unsigned is_self_powered:1;

	unsigned test_mode:1;

	unsigned softconnect:1;

	unsigned u1_enable:1;

	unsigned u2_enable:1;

	unsigned is_u3_ip:1;



	u8 address;

	u8 test_mode_nr;
@@ -324,7 +333,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set); 
void mtu3_ep0_setup(struct mtu3 *mtu);

void mtu3_start(struct mtu3 *mtu);

void mtu3_stop(struct mtu3 *mtu);

void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable);

void mtu3_dev_on_off(struct mtu3 *mtu, int is_on);



int mtu3_gadget_setup(struct mtu3 *mtu);

void mtu3_gadget_cleanup(struct mtu3 *mtu);

drivers/usb/mtu3/mtu3_core.c

+180 −22
Original line number Diff line number Diff line
@@ -72,8 +72,20 @@ static void ep_fifo_free(struct mtu3_ep *mep) 
		__func__, mep->fifo_seg_size, mep->fifo_size, start_bit);

}



/* enable/disable U3D SS function */

static inline void mtu3_ss_func_set(struct mtu3 *mtu, bool enable)

{

	/* If usb3_en==0, LTSSM will go to SS.Disable state */

	if (enable)

		mtu3_setbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);

	else

		mtu3_clrbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);



	dev_dbg(mtu->dev, "USB3_EN = %d\n", !!enable);

}



/* set/clear U3D HS device soft connect */

void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)

static inline void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)

{

	if (enable) {

		mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
@@ -92,6 +104,13 @@ static int mtu3_device_enable(struct mtu3 *mtu) 
	u32 check_clk = 0;



	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);



	if (mtu->is_u3_ip) {

		check_clk = SSUSB_U3_MAC_RST_B_STS;

		mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),

			(SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN |

			SSUSB_U3_PORT_HOST_SEL));

	}

	mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),

		(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |

		SSUSB_U2_PORT_HOST_SEL));
@@ -104,6 +123,10 @@ static void mtu3_device_disable(struct mtu3 *mtu) 
{

	void __iomem *ibase = mtu->ippc_base;



	if (mtu->is_u3_ip)

		mtu3_setbits(ibase, SSUSB_U3_CTRL(0),

			(SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN));



	mtu3_setbits(ibase, SSUSB_U2_CTRL(0),

		SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);

	mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
@@ -142,6 +165,9 @@ static void mtu3_intr_status_clear(struct mtu3 *mtu) 
	/* Clear U2 USB common interrupts status */

	mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0);



	/* Clear U3 LTSSM interrupts status */

	mtu3_writel(mbase, U3D_LTSSM_INTR, ~0x0);



	/* Clear speed change interrupt status */

	mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0);

}
@@ -153,13 +179,20 @@ static void mtu3_intr_enable(struct mtu3 *mtu) 
	u32 value;



	/*Enable level 1 interrupts (BMU, QMU, MAC3, DMA, MAC2, EPCTL) */

	value = BMU_INTR | QMU_INTR | MAC2_INTR | EP_CTRL_INTR;

	value = BMU_INTR | QMU_INTR | MAC3_INTR | MAC2_INTR | EP_CTRL_INTR;

	mtu3_writel(mbase, U3D_LV1IESR, value);



	/* Enable U2 common USB interrupts */

	value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;

	mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);



	if (mtu->is_u3_ip) {

		/* Enable U3 LTSSM interrupts */

		value = HOT_RST_INTR | WARM_RST_INTR | VBUS_RISE_INTR |

		    VBUS_FALL_INTR | ENTER_U3_INTR | EXIT_U3_INTR;

		mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value);

	}



	/* Enable QMU interrupts. */

	value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT |

			RXQ_LENERR_INT | RXQ_ZLPERR_INT;
@@ -205,6 +238,17 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set) 
		set ? "SEND STALL" : "CLEAR STALL, with EP RESET");

}



void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)

{

	if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))

		mtu3_ss_func_set(mtu, is_on);

	else

		mtu3_hs_softconn_set(mtu, is_on);



	dev_info(mtu->dev, "gadget (%s) pullup D%s\n",

		usb_speed_string(mtu->max_speed), is_on ? "+" : "-");

}



void mtu3_start(struct mtu3 *mtu)

{

	void __iomem *mbase = mtu->mac_base;
@@ -214,13 +258,21 @@ void mtu3_start(struct mtu3 *mtu) 


	mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);



	/*

	 * When disable U2 port, USB2_CSR's register will be reset to

	 * default value after re-enable it again(HS is enabled by default).

	 * So if force mac to work as FS, disable HS function.

	 */

	if (mtu->max_speed == USB_SPEED_FULL)

		mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);



	/* Initialize the default interrupts */

	mtu3_intr_enable(mtu);



	mtu->is_active = 1;



	if (mtu->softconnect)

		mtu3_hs_softconn_set(mtu, 1);

		mtu3_dev_on_off(mtu, 1);

}



void mtu3_stop(struct mtu3 *mtu)
@@ -231,7 +283,7 @@ void mtu3_stop(struct mtu3 *mtu) 
	mtu3_intr_status_clear(mtu);



	if (mtu->softconnect)

		mtu3_hs_softconn_set(mtu, 0);

		mtu3_dev_on_off(mtu, 0);



	mtu->is_active = 0;

	mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
@@ -362,7 +414,10 @@ void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep) 
}



/*

 * 1. when supports only HS, the fifo is shared for all EPs, and

 * Two scenarios:

 * 1. when device IP supports SS, the fifo of EP0, TX EPs, RX EPs

 *	are separated;

 * 2. when supports only HS, the fifo is shared for all EPs, and

 *	the capability registers of @EPNTXFFSZ or @EPNRXFFSZ indicate

 *	the total fifo size of non-ep0, and ep0's is fixed to 64B,

 *	so the total fifo size is 64B + @EPNTXFFSZ;
@@ -376,6 +431,20 @@ static void get_ep_fifo_config(struct mtu3 *mtu) 
	struct mtu3_fifo_info *rx_fifo;

	u32 fifosize;



	if (mtu->is_u3_ip) {

		fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);

		tx_fifo = &mtu->tx_fifo;

		tx_fifo->base = 0;

		tx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;

		bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);



		fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNRXFFSZ);

		rx_fifo = &mtu->rx_fifo;

		rx_fifo->base = 0;

		rx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;

		bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);

		mtu->slot = MTU3_U3_IP_SLOT_DEFAULT;

	} else {

		fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);

		tx_fifo = &mtu->tx_fifo;

		tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE;
@@ -388,6 +457,7 @@ static void get_ep_fifo_config(struct mtu3 *mtu) 
		rx_fifo->limit = tx_fifo->limit;

		bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);

		mtu->slot = MTU3_U2_IP_SLOT_DEFAULT;

	}



	dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n",

		__func__, tx_fifo->base, tx_fifo->limit,
@@ -416,17 +486,21 @@ static int mtu3_mem_alloc(struct mtu3 *mtu) 
	void __iomem *mbase = mtu->mac_base;

	struct mtu3_ep *ep_array;

	int in_ep_num, out_ep_num;

	u32 cap_epinfo;

	u32 cap_epinfo, cap_dev;

	int ret;

	int i;



	mtu->hw_version = mtu3_readl(mtu->ippc_base, U3D_SSUSB_HW_ID);



	cap_dev = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP);

	mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(cap_dev);



	cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO);

	in_ep_num = CAP_TX_EP_NUM(cap_epinfo);

	out_ep_num = CAP_RX_EP_NUM(cap_epinfo);



	dev_info(mtu->dev, "IP version 0x%x\n", mtu->hw_version);

	dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version,

		mtu->is_u3_ip ? "U3" : "U2");

	dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n",

		 mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num,

		 mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num);
@@ -469,6 +543,27 @@ static void mtu3_mem_free(struct mtu3 *mtu) 
	kfree(mtu->ep_array);

}



static void mtu3_set_speed(struct mtu3 *mtu)

{

	void __iomem *mbase = mtu->mac_base;



	if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH))

		mtu->max_speed = USB_SPEED_HIGH;



	if (mtu->max_speed == USB_SPEED_FULL) {

		/* disable U3 SS function */

		mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);

		/* disable HS function */

		mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);

	} else if (mtu->max_speed == USB_SPEED_HIGH) {

		mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);

		/* HS/FS detected by HW */

		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);

	}

	dev_info(mtu->dev, "max_speed: %s\n",

		usb_speed_string(mtu->max_speed));

}



static void mtu3_regs_init(struct mtu3 *mtu)

{
@@ -478,9 +573,16 @@ static void mtu3_regs_init(struct mtu3 *mtu) 
	mtu3_intr_disable(mtu);

	mtu3_intr_status_clear(mtu);



	mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);

	/* HS/FS detected by HW */

	mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);

	if (mtu->is_u3_ip) {

		/* disable LGO_U1/U2 by default */

		mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,

				SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE |

				SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);

		/* device responses to u3_exit from host automatically */

		mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);

	}



	mtu3_set_speed(mtu);



	/* delay about 0.1us from detecting reset to send chirp-K */

	mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK);
@@ -530,6 +632,10 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) 
		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,

				LPM_BESL_STALL | LPM_BESLD_STALL);

		break;

	case MTU3_SPEED_SUPER:

		udev_speed = USB_SPEED_SUPER;

		maxpkt = 512;

		break;

	default:

		udev_speed = USB_SPEED_UNKNOWN;

		break;
@@ -548,6 +654,34 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) 
	return IRQ_HANDLED;

}



static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu)

{

	void __iomem *mbase = mtu->mac_base;

	u32 ltssm;



	ltssm = mtu3_readl(mbase, U3D_LTSSM_INTR);

	ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE);

	mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm); /* W1C */

	dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm);



	if (ltssm & (HOT_RST_INTR | WARM_RST_INTR))

		mtu3_gadget_reset(mtu);



	if (ltssm & VBUS_FALL_INTR)

		mtu3_ss_func_set(mtu, false);



	if (ltssm & VBUS_RISE_INTR)

		mtu3_ss_func_set(mtu, true);



	if (ltssm & EXIT_U3_INTR)

		mtu3_gadget_resume(mtu);



	if (ltssm & ENTER_U3_INTR)

		mtu3_gadget_suspend(mtu);



	return IRQ_HANDLED;

}



static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)

{

	void __iomem *mbase = mtu->mac_base;
@@ -588,6 +722,9 @@ irqreturn_t mtu3_irq(int irq, void *data) 
	if (level1 & MAC2_INTR)

		mtu3_u2_common_isr(mtu);



	if (level1 & MAC3_INTR)

		mtu3_u3_ltssm_isr(mtu);



	if (level1 & BMU_INTR)

		mtu3_ep0_isr(mtu);
@@ -633,6 +770,27 @@ int ssusb_gadget_init(struct mtu3 *mtu) 
	struct device *dev = mtu->dev;

	int ret;



	mtu->max_speed = usb_get_maximum_speed(dev);



	/* check the max_speed parameter */

	switch (mtu->max_speed) {

	case USB_SPEED_FULL:

	case USB_SPEED_HIGH:

	case USB_SPEED_SUPER:

		break;

	default:

		dev_err(dev, "invalid max_speed: %s\n",

			usb_speed_string(mtu->max_speed));

		/* fall through */

	case USB_SPEED_UNKNOWN:

		/* default as SS */

		mtu->max_speed = USB_SPEED_SUPER;

		break;

	}



	dev_dbg(dev, "mac_base=0x%p, ippc_base=0x%p\n",

		mtu->mac_base, mtu->ippc_base);



	ret = mtu3_hw_init(mtu);

	if (ret) {

		dev_err(dev, "mtu3 hw init failed:%d\n", ret);

drivers/usb/mtu3/mtu3_gadget.c

+32 −13
Original line number Diff line number Diff line
@@ -73,6 +73,7 @@ static void nuke(struct mtu3_ep *mep, const int status) 
static int mtu3_ep_enable(struct mtu3_ep *mep)

{

	const struct usb_endpoint_descriptor *desc;

	const struct usb_ss_ep_comp_descriptor *comp_desc;

	struct mtu3 *mtu = mep->mtu;

	u32 interval = 0;

	u32 mult = 0;
@@ -81,11 +82,24 @@ static int mtu3_ep_enable(struct mtu3_ep *mep) 
	int ret;



	desc = mep->desc;

	comp_desc = mep->comp_desc;

	mep->type = usb_endpoint_type(desc);

	max_packet = usb_endpoint_maxp(desc);

	mep->maxp = max_packet & GENMASK(10, 0);



	switch (mtu->g.speed) {

	case USB_SPEED_SUPER:

		if (usb_endpoint_xfer_int(desc) ||

				usb_endpoint_xfer_isoc(desc)) {

			interval = desc->bInterval;

			interval = clamp_val(interval, 1, 16) - 1;

			if (usb_endpoint_xfer_isoc(desc) && comp_desc)

				mult = comp_desc->bmAttributes;

		}

		if (comp_desc)

			burst = comp_desc->bMaxBurst;



		break;

	case USB_SPEED_HIGH:

		if (usb_endpoint_xfer_isoc(desc) ||

				usb_endpoint_xfer_int(desc)) {
@@ -103,6 +117,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep) 


	mep->ep.maxpacket = mep->maxp;

	mep->ep.desc = desc;

	mep->ep.comp_desc = comp_desc;



	/* slot mainly affects bulk/isoc transfer, so ignore int */

	mep->slot = usb_endpoint_xfer_int(desc) ? 0 : mtu->slot;
@@ -135,6 +150,7 @@ static int mtu3_ep_disable(struct mtu3_ep *mep) 


	mep->desc = NULL;

	mep->ep.desc = NULL;

	mep->comp_desc = NULL;

	mep->type = 0;

	mep->flags = 0;
@@ -178,6 +194,7 @@ static int mtu3_gadget_ep_enable(struct usb_ep *ep, 


	spin_lock_irqsave(&mtu->lock, flags);

	mep->desc = desc;

	mep->comp_desc = ep->comp_desc;



	ret = mtu3_ep_enable(mep);

	if (ret)
@@ -439,13 +456,15 @@ static int mtu3_gadget_wakeup(struct usb_gadget *gadget) 
		return  -EOPNOTSUPP;



	spin_lock_irqsave(&mtu->lock, flags);



	if (mtu->g.speed == USB_SPEED_SUPER) {

		mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);

	} else {

		mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);

		spin_unlock_irqrestore(&mtu->lock, flags);

		usleep_range(10000, 11000);

		spin_lock_irqsave(&mtu->lock, flags);

		mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);



	}

	spin_unlock_irqrestore(&mtu->lock, flags);

	return 0;

}
@@ -476,7 +495,7 @@ static int mtu3_gadget_pullup(struct usb_gadget *gadget, int is_on) 
		mtu->softconnect = is_on;

	} else if (is_on != mtu->softconnect) {

		mtu->softconnect = is_on;

		mtu3_hs_softconn_set(mtu, is_on);

		mtu3_dev_on_off(mtu, is_on);

	}



	spin_unlock_irqrestore(&mtu->lock, flags);
@@ -524,7 +543,7 @@ static void stop_activity(struct mtu3 *mtu) 
	/* deactivate the hardware */

	if (mtu->softconnect) {

		mtu->softconnect = 0;

		mtu3_hs_softconn_set(mtu, 0);

		mtu3_dev_on_off(mtu, 0);

	}



	/*
@@ -587,14 +606,14 @@ static void init_hw_ep(struct mtu3 *mtu, struct mtu3_ep *mep, 
	mep->ep.name = mep->name;

	INIT_LIST_HEAD(&mep->ep.ep_list);



	/* initialize maxpacket as HS */

	/* initialize maxpacket as SS */

	if (!epnum) {

		usb_ep_set_maxpacket_limit(&mep->ep, 64);

		usb_ep_set_maxpacket_limit(&mep->ep, 512);

		mep->ep.caps.type_control = true;

		mep->ep.ops = &mtu3_ep0_ops;

		mtu->g.ep0 = &mep->ep;

	} else {

		usb_ep_set_maxpacket_limit(&mep->ep, 512);

		usb_ep_set_maxpacket_limit(&mep->ep, 1024);

		mep->ep.caps.type_iso = true;

		mep->ep.caps.type_bulk = true;

		mep->ep.caps.type_int = true;
@@ -637,7 +656,7 @@ int mtu3_gadget_setup(struct mtu3 *mtu) 
	int ret;



	mtu->g.ops = &mtu3_gadget_ops;

	mtu->g.max_speed = USB_SPEED_HIGH;

	mtu->g.max_speed = mtu->max_speed;

	mtu->g.speed = USB_SPEED_UNKNOWN;

	mtu->g.sg_supported = 0;

	mtu->g.name = MTU3_DRIVER_NAME;

drivers/usb/mtu3/mtu3_gadget_ep0.c

+90 −0
Original line number Diff line number Diff line
@@ -161,6 +161,41 @@ static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq); 
static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)

{}



static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req)

{

	struct mtu3_request *mreq;

	struct mtu3 *mtu;

	struct usb_set_sel_req sel;



	memcpy(&sel, req->buf, sizeof(sel));



	mreq = to_mtu3_request(req);

	mtu = mreq->mtu;

	dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n",

		sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel);

}



/* queue data stage to handle 6 byte SET_SEL request */

static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup)

{

	int ret;

	u16 length = le16_to_cpu(setup->wLength);



	if (unlikely(length != 6)) {

		dev_err(mtu->dev, "%s wrong wLength:%d\n",

			__func__, length);

		return -EINVAL;

	}



	mtu->ep0_req.mep = mtu->ep0;

	mtu->ep0_req.request.length = 6;

	mtu->ep0_req.request.buf = mtu->setup_buf;

	mtu->ep0_req.request.complete = ep0_set_sel_complete;

	ret = ep0_queue(mtu->ep0, &mtu->ep0_req);



	return ret < 0 ? ret : 1;

}



static int

ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)

{
@@ -174,6 +209,15 @@ ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup) 
	case USB_RECIP_DEVICE:

		result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;

		result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;

		/* superspeed only */

		if (mtu->g.speed == USB_SPEED_SUPER) {

			result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;

			result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;

		}



		dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__,

			result[0], mtu->u1_enable, mtu->u2_enable);



		break;

	case USB_RECIP_INTERFACE:

		break;
@@ -265,7 +309,9 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup) 
static int ep0_handle_feature_dev(struct mtu3 *mtu,

		struct usb_ctrlrequest *setup, bool set)

{

	void __iomem *mbase = mtu->mac_base;

	int handled = -EINVAL;

	u32 lpc;



	switch (le16_to_cpu(setup->wValue)) {

	case USB_DEVICE_REMOTE_WAKEUP:
@@ -279,6 +325,36 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, 


		handled = handle_test_mode(mtu, setup);

		break;

	case USB_DEVICE_U1_ENABLE:

		if (mtu->g.speed != USB_SPEED_SUPER ||

			mtu->g.state != USB_STATE_CONFIGURED)

			break;



		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);

		if (set)

			lpc |= SW_U1_ACCEPT_ENABLE;

		else

			lpc &= ~SW_U1_ACCEPT_ENABLE;

		mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);



		mtu->u1_enable = !!set;

		handled = 1;

		break;

	case USB_DEVICE_U2_ENABLE:

		if (mtu->g.speed != USB_SPEED_SUPER ||

			mtu->g.state != USB_STATE_CONFIGURED)

			break;



		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);

		if (set)

			lpc |= SW_U2_ACCEPT_ENABLE;

		else

			lpc &= ~SW_U2_ACCEPT_ENABLE;

		mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);



		mtu->u2_enable = !!set;

		handled = 1;

		break;

	default:

		handled = -EINVAL;

		break;
@@ -303,6 +379,17 @@ static int ep0_handle_feature(struct mtu3 *mtu, 
	case USB_RECIP_DEVICE:

		handled = ep0_handle_feature_dev(mtu, setup, set);

		break;

	case USB_RECIP_INTERFACE:

		/* superspeed only */

		if ((value == USB_INTRF_FUNC_SUSPEND)

			&& (mtu->g.speed == USB_SPEED_SUPER)) {

			/*

			 * forward the request because function drivers

			 * should handle it

			 */

			handled = 0;

		}

		break;

	case USB_RECIP_ENDPOINT:

		epnum = index & USB_ENDPOINT_NUMBER_MASK;

		if (epnum == 0 || epnum >= mtu->num_eps ||
@@ -390,6 +477,9 @@ static int handle_standard_request(struct mtu3 *mtu, 
	case USB_REQ_GET_STATUS:

		handled = ep0_get_status(mtu, setup);

		break;

	case USB_REQ_SET_SEL:

		handled = ep0_set_sel(mtu, setup);

		break;

	case USB_REQ_SET_ISOCH_DELAY:

		handled = 1;

		break;

drivers/usb/mtu3/mtu3_hw_regs.h

+33 −0
Original line number Diff line number Diff line
@@ -260,13 +260,46 @@ 


/*---------------- SSUSB_USB3_MAC_CSR REGISTER DEFINITION ----------------*/



#define U3D_LTSSM_CTRL		(SSUSB_USB3_MAC_CSR_BASE + 0x0010)

#define U3D_USB3_CONFIG		(SSUSB_USB3_MAC_CSR_BASE + 0x001C)



#define U3D_LTSSM_INTR_ENABLE	(SSUSB_USB3_MAC_CSR_BASE + 0x013C)

#define U3D_LTSSM_INTR		(SSUSB_USB3_MAC_CSR_BASE + 0x0140)



/*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/



/* U3D_LTSSM_CTRL */

#define FORCE_POLLING_FAIL	BIT(4)

#define FORCE_RXDETECT_FAIL	BIT(3)

#define SOFT_U3_EXIT_EN		BIT(2)

#define COMPLIANCE_EN		BIT(1)

#define U1_GO_U2_EN		BIT(0)



/* U3D_USB3_CONFIG */

#define USB3_EN			BIT(0)



/* U3D_LTSSM_INTR_ENABLE */

/* U3D_LTSSM_INTR */

#define U3_RESUME_INTR		BIT(18)

#define U3_LFPS_TMOUT_INTR	BIT(17)

#define VBUS_FALL_INTR		BIT(16)

#define VBUS_RISE_INTR		BIT(15)

#define RXDET_SUCCESS_INTR	BIT(14)

#define EXIT_U3_INTR		BIT(13)

#define EXIT_U2_INTR		BIT(12)

#define EXIT_U1_INTR		BIT(11)

#define ENTER_U3_INTR		BIT(10)

#define ENTER_U2_INTR		BIT(9)

#define ENTER_U1_INTR		BIT(8)

#define ENTER_U0_INTR		BIT(7)

#define RECOVERY_INTR		BIT(6)

#define WARM_RST_INTR		BIT(5)

#define HOT_RST_INTR		BIT(4)

#define LOOPBACK_INTR		BIT(3)

#define COMPLIANCE_INTR		BIT(2)

#define SS_DISABLE_INTR		BIT(1)

#define SS_INACTIVE_INTR	BIT(0)



/*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/



#define U3D_LINK_UX_INACT_TIMER	(SSUSB_USB3_SYS_CSR_BASE + 0x020C)