Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a211b8c5 authored by Leonard Crestez's avatar Leonard Crestez Committed by Shawn Guo
Browse files

ARM: dts: imx6qdl-sabreauto: Add sensors 



The following sensors are on I2C3 on the baseboard:
* isil,isl29023 light sensor
* fsl,mag3110 magnetometer
* fsl,mma8451 accelerometer

Added under i2cmux/i2c@1 because they're not otherwise accessible.

These are all supported by iio with following configs:
* CONFIG_SENSORS_ISL29018
* CONFIG_MAG3110
* CONFIG_MMA8452

Tested with raw reads from iio sysfs.

Signed-off-by: default avatarLeonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent f3af1e5c

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

+21 −0
Original line number Diff line number Diff line
@@ -155,6 +155,27 @@ 
				gpio-controller;

				#gpio-cells = <2>;

			};



			light-sensor@44 {

				compatible = "isil,isl29023";

				reg = <0x44>;

				interrupt-parent = <&gpio5>;

				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;

			};



			magnetometer@e {

				compatible = "fsl,mag3110";

				reg = <0x0e>;

				interrupt-parent = <&gpio2>;

				interrupts = <29 IRQ_TYPE_EDGE_RISING>;

			};



			accelerometer@1c {

				compatible = "fsl,mma8451";

				reg = <0x1c>;

				interrupt-parent = <&gpio6>;

				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;

			};

		};

	};

};