Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a1d354a7 authored by Jacopo Mondi's avatar Jacopo Mondi Committed by Simon Horman
Browse files

arm64: dts: renesas: ebisu: Add HDMI and CVBS input 



Add HDMI and CVBS inputs device nodes to R-Car E3 Ebisu board.

Both HDMI and CVBS inputs are connected to an ADV7482 video decoder hooked to
the SoC CSI-2 receiver port.

Signed-off-by: default avatarJacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent c79661eb

arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts

+86 −0
Original line number Diff line number Diff line
@@ -28,6 +28,29 @@ 
		/* first 128MB is reserved for secure area. */

		reg = <0x0 0x48000000 0x0 0x38000000>;

	};



	cvbs-in {

		compatible = "composite-video-connector";

		label = "CVBS IN";



		port {

			cvbs_con: endpoint {

				remote-endpoint = <&adv7482_ain7>;

			};

		};

	};



	hdmi-in {

		compatible = "hdmi-connector";

		label = "HDMI IN";

		type = "a";



		port {

			hdmi_in_con: endpoint {

				remote-endpoint = <&adv7482_hdmi>;

			};

		};

	};

};



&avb {
@@ -47,6 +70,22 @@ 
	};

};



&csi40 {

	status = "okay";



	ports {

		port@0 {

			reg = <0>;



			csi40_in: endpoint {

				clock-lanes = <0>;

				data-lanes = <1 2>;

				remote-endpoint = <&adv7482_txa>;

			};

		};

	};

};



&ehci0 {

	status = "okay";

};
@@ -55,6 +94,49 @@ 
	clock-frequency = <48000000>;

};



&i2c0 {

	status = "okay";



	video-receiver@70 {

		compatible = "adi,adv7482";

		reg = <0x70>;



		#address-cells = <1>;

		#size-cells = <0>;



		interrupt-parent = <&gpio0>;

		interrupt-names = "intrq1", "intrq2";

		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,

			     <17 IRQ_TYPE_LEVEL_LOW>;



		port@7 {

			reg = <7>;



			adv7482_ain7: endpoint {

				remote-endpoint = <&cvbs_con>;

			};

		};



		port@8 {

			reg = <8>;



			adv7482_hdmi: endpoint {

				remote-endpoint = <&hdmi_in_con>;

			};

		};



		port@a {

			reg = <0xa>;



			adv7482_txa: endpoint {

				clock-lanes = <0>;

				data-lanes = <1 2>;

				remote-endpoint = <&csi40_in>;

			};

		};

	};

};



&ohci0 {

	status = "okay";

};
@@ -118,6 +200,10 @@ 
	status = "okay";

};



&vin4 {

	status = "okay";

};



&xhci0 {

	pinctrl-0 = <&usb30_pins>;

	pinctrl-names = "default";