Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a10c1c81 authored by Russell King's avatar Russell King Committed by David S. Miller
Browse files

net: marvell: neta: add comphy support



Add support for the common phy binding, so that we can reconfigure the
comphy according to the desired ethernet speed.  This will allow us to
support 1000base-X and 2500base-X SFPs dynamically on SolidRun Clearfog.

Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 4ca124f4
Loading
Loading
Loading
Loading
+41 −4
Original line number Diff line number Diff line
@@ -27,6 +27,7 @@
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/phy/phy.h>
#include <linux/phy.h>
#include <linux/phylink.h>
#include <linux/platform_device.h>
@@ -436,6 +437,7 @@ struct mvneta_port {
	struct device_node *dn;
	unsigned int tx_csum_limit;
	struct phylink *phylink;
	struct phy *comphy;

	struct mvneta_bm *bm_priv;
	struct mvneta_bm_pool *pool_long;
@@ -3151,6 +3153,8 @@ static void mvneta_start_dev(struct mvneta_port *pp)
{
	int cpu;

	WARN_ON(phy_power_on(pp->comphy));

	mvneta_max_rx_size_set(pp, pp->pkt_size);
	mvneta_txq_max_tx_size_set(pp, pp->pkt_size);

@@ -3213,6 +3217,8 @@ static void mvneta_stop_dev(struct mvneta_port *pp)

	mvneta_tx_reset(pp);
	mvneta_rx_reset(pp);

	WARN_ON(phy_power_off(pp->comphy));
}

static void mvneta_percpu_enable(void *arg)
@@ -3338,6 +3344,7 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr)
static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
			    struct phylink_link_state *state)
{
	struct mvneta_port *pp = netdev_priv(ndev);
	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };

	/* We only support QSGMII, SGMII, 802.3z and RGMII modes */
@@ -3358,8 +3365,13 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
	phylink_set(mask, Pause);

	/* Half-duplex at speeds higher than 100Mbit is unsupported */
	if (pp->comphy || state->interface != PHY_INTERFACE_MODE_2500BASEX) {
		phylink_set(mask, 1000baseT_Full);
		phylink_set(mask, 1000baseX_Full);
	}
	if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) {
		phylink_set(mask, 2500baseX_Full);
	}

	if (!phy_interface_mode_is_8023z(state->interface)) {
		/* 10M and 100M are only supported in non-802.3z mode */
@@ -3373,6 +3385,11 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
		   __ETHTOOL_LINK_MODE_MASK_NBITS);
	bitmap_and(state->advertising, state->advertising, mask,
		   __ETHTOOL_LINK_MODE_MASK_NBITS);

	/* We can only operate at 2500BaseX or 1000BaseX.  If requested
	 * to advertise both, only report advertising at 2500BaseX.
	 */
	phylink_helper_basex_speed(state);
}

static int mvneta_mac_link_state(struct net_device *ndev,
@@ -3384,7 +3401,9 @@ static int mvneta_mac_link_state(struct net_device *ndev,
	gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);

	if (gmac_stat & MVNETA_GMAC_SPEED_1000)
		state->speed = SPEED_1000;
		state->speed =
			state->interface == PHY_INTERFACE_MODE_2500BASEX ?
			SPEED_2500 : SPEED_1000;
	else if (gmac_stat & MVNETA_GMAC_SPEED_100)
		state->speed = SPEED_100;
	else
@@ -3499,12 +3518,20 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
			    MVNETA_GMAC_FORCE_LINK_DOWN);
	}


	/* When at 2.5G, the link partner can send frames with shortened
	 * preambles.
	 */
	if (state->speed == SPEED_2500)
		new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;

	if (pp->comphy &&
	    (state->interface == PHY_INTERFACE_MODE_SGMII ||
	     state->interface == PHY_INTERFACE_MODE_1000BASEX ||
	     state->interface == PHY_INTERFACE_MODE_2500BASEX))
		WARN_ON(phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET,
					 state->interface));

	if (new_ctrl0 != gmac_ctrl0)
		mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
	if (new_ctrl2 != gmac_ctrl2)
@@ -4404,7 +4431,7 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
	if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
	else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
		 phy_mode == PHY_INTERFACE_MODE_1000BASEX)
		 phy_interface_mode_is_8023z(phy_mode))
		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
	else if (!phy_interface_mode_is_rgmii(phy_mode))
		return -EINVAL;
@@ -4421,6 +4448,7 @@ static int mvneta_probe(struct platform_device *pdev)
	struct mvneta_port *pp;
	struct net_device *dev;
	struct phylink *phylink;
	struct phy *comphy;
	const char *dt_mac_addr;
	char hw_mac_addr[ETH_ALEN];
	const char *mac_from;
@@ -4446,6 +4474,14 @@ static int mvneta_probe(struct platform_device *pdev)
		goto err_free_irq;
	}

	comphy = devm_of_phy_get(&pdev->dev, dn, NULL);
	if (comphy == ERR_PTR(-EPROBE_DEFER)) {
		err = -EPROBE_DEFER;
		goto err_free_irq;
	} else if (IS_ERR(comphy)) {
		comphy = NULL;
	}

	phylink = phylink_create(dev, pdev->dev.fwnode, phy_mode,
				 &mvneta_phylink_ops);
	if (IS_ERR(phylink)) {
@@ -4462,6 +4498,7 @@ static int mvneta_probe(struct platform_device *pdev)
	pp = netdev_priv(dev);
	spin_lock_init(&pp->lock);
	pp->phylink = phylink;
	pp->comphy = comphy;
	pp->phy_interface = phy_mode;
	pp->dn = dn;