ARM: dts: TS-7970: add basic device tree (9ff8e9fc) · Commits · e / devices / android_kernel_fairphone_FP5

arch/arm/boot/dts/Makefile

+2 −0

Original line number	Original line	Diff line number	Diff line
	@@ -400,6 +400,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
	imx6dl-sabresd.dtb \		imx6dl-sabresd.dtb \
	imx6dl-savageboard.dtb \		imx6dl-savageboard.dtb \
	imx6dl-ts4900.dtb \		imx6dl-ts4900.dtb \
			imx6dl-ts7970.dtb \
	imx6dl-tx6dl-comtft.dtb \		imx6dl-tx6dl-comtft.dtb \
	imx6dl-tx6s-8034.dtb \		imx6dl-tx6s-8034.dtb \
	imx6dl-tx6s-8034-mb7.dtb \		imx6dl-tx6s-8034-mb7.dtb \
	@@ -467,6 +468,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
	imx6q-sbc6x.dtb \		imx6q-sbc6x.dtb \
	imx6q-tbs2910.dtb \		imx6q-tbs2910.dtb \
	imx6q-ts4900.dtb \		imx6q-ts4900.dtb \
			imx6q-ts7970.dtb \
	imx6q-tx6q-1010.dtb \		imx6q-tx6q-1010.dtb \
	imx6q-tx6q-1010-comtft.dtb \		imx6q-tx6q-1010-comtft.dtb \
	imx6q-tx6q-1020.dtb \		imx6q-tx6q-1020.dtb \

arch/arm/boot/dts/imx6dl-ts7970.dts

0 → 100644

+50 −0

Original line number	Original line	Diff line number	Diff line
			/*
			* Copyright 2015 Technologic Systems
			* Copyright 2017 Savoir-faire Linux
			*
			* This file is dual-licensed: you can use it either under the terms
			* of the GPL or the X11 license, at your option. Note that this dual
			* licensing only applies to this file, and not this project as a
			* whole.
			*
			* a) This file is free software; you can redistribute it and/or
			* modify it under the terms of the GNU General Public License
			* version 2 as published by the Free Software Foundation.
			*
			* This file is distributed in the hope that it will be useful,
			* but WITHOUT ANY WARRANTY; without even the implied warranty of
			* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
			* GNU General Public License for more details.
			*
			* Or, alternatively,
			*
			* b) Permission is hereby granted, free of charge, to any person
			* obtaining a copy of this software and associated documentation
			* files (the "Software"), to deal in the Software without
			* restriction, including without limitation the rights to use,
			* copy, modify, merge, publish, distribute, sublicense, and/or
			* sell copies of the Software, and to permit persons to whom the
			* Software is furnished to do so, subject to the following
			* conditions:
			*
			* The above copyright notice and this permission notice shall be
			* included in all copies or substantial portions of the Software.
			*
			* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
			* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
			* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
			* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
			* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
			* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
			* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
			* OTHER DEALINGS IN THE SOFTWARE.
			*/

			/dts-v1/;
			#include "imx6dl.dtsi"
			#include "imx6qdl-ts7970.dtsi"

			/ {
			model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)";
			compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl";
			};

arch/arm/boot/dts/imx6q-ts7970.dts

0 → 100644

+54 −0

Original line number	Original line	Diff line number	Diff line
			/*
			* Copyright 2015 Technologic Systems
			* Copyright 2017 Savoir-faire Linux
			*
			* This file is dual-licensed: you can use it either under the terms
			* of the GPL or the X11 license, at your option. Note that this dual
			* licensing only applies to this file, and not this project as a
			* whole.
			*
			* a) This file is free software; you can redistribute it and/or
			* modify it under the terms of the GNU General Public License
			* version 2 as published by the Free Software Foundation.
			*
			* This file is distributed in the hope that it will be useful,
			* but WITHOUT ANY WARRANTY; without even the implied warranty of
			* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
			* GNU General Public License for more details.
			*
			* Or, alternatively,
			*
			* b) Permission is hereby granted, free of charge, to any person
			* obtaining a copy of this software and associated documentation
			* files (the "Software"), to deal in the Software without
			* restriction, including without limitation the rights to use,
			* copy, modify, merge, publish, distribute, sublicense, and/or
			* sell copies of the Software, and to permit persons to whom the
			* Software is furnished to do so, subject to the following
			* conditions:
			*
			* The above copyright notice and this permission notice shall be
			* included in all copies or substantial portions of the Software.
			*
			* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
			* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
			* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
			* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
			* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
			* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
			* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
			* OTHER DEALINGS IN THE SOFTWARE.
			*/

			/dts-v1/;
			#include "imx6q.dtsi"
			#include "imx6qdl-ts7970.dtsi"

			/ {
			model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)";
			compatible = "technologic,imx6q-ts7970", "fsl,imx6q";
			};

			&sata {
			status = "okay";
			};

arch/arm/boot/dts/imx6qdl-ts7970.dtsi

0 → 100644

+594 −0

Original line number	Original line	Diff line number	Diff line
			/*
			* Copyright 2015 Technologic Systems
			* Copyright 2017 Savoir-Faire Linux
			*
			* This file is dual-licensed: you can use it either under the terms
			* of the GPL or the X11 license, at your option. Note that this dual
			* licensing only applies to this file, and not this project as a
			* whole.
			*
			* a) This file is free software; you can redistribute it and/or
			* modify it under the terms of the GNU General Public License
			* version 2 as published by the Free Software Foundation.
			*
			* This file is distributed in the hope that it will be useful,
			* but WITHOUT ANY WARRANTY; without even the implied warranty of
			* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
			* GNU General Public License for more details.
			*
			* Or, alternatively,
			*
			* b) Permission is hereby granted, free of charge, to any person
			* obtaining a copy of this software and associated documentation
			* files (the "Software"), to deal in the Software without
			* restriction, including without limitation the rights to use,
			* copy, modify, merge, publish, distribute, sublicense, and/or
			* sell copies of the Software, and to permit persons to whom the
			* Software is furnished to do so, subject to the following
			* conditions:
			*
			* The above copyright notice and this permission notice shall be
			* included in all copies or substantial portions of the Software.
			*
			* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
			* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
			* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
			* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
			* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
			* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
			* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
			* OTHER DEALINGS IN THE SOFTWARE.
			*/

			#include <dt-bindings/gpio/gpio.h>
			#include <dt-bindings/interrupt-controller/irq.h>

			/ {
			leds {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_leds1>;
			compatible = "gpio-leds";

			green-led {
			label = "green-led";
			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
			default-state = "on";
			};

			red-led {
			label = "red-led";
			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
			default-state = "off";
			};

			yel-led {
			label = "yellow-led";
			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
			default-state = "off";
			};

			blue-led {
			label = "blue-led";
			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
			default-state = "off";
			};

			en-usb-5v {
			label = "en-usb-5v";
			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
			default-state = "on";
			};

			sel_dc_usb {
			label = "sel_dc_usb";
			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			};

			};

			reg_3p3v: regulator-3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3p3v";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
			};

			reg_can1_3v3: reg_can1_3v3 {
			compatible = "regulator-fixed";
			regulator-name = "reg_can1_3v3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			};

			reg_can2_3v3: en-reg_can2_3v3 {
			compatible = "regulator-fixed";
			regulator-name = "reg_can2_3v3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			};

			reg_usb_otg_vbus: regulator-usb-otg-vbus {
			compatible = "regulator-fixed";
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			};

			reg_wlan_vmmc: regulator_wlan_vmmc {
			compatible = "regulator-fixed";
			regulator-name = "wlan_vmmc";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>;
			startup-delay-us = <70000>;
			enable-active-high;
			};

			sound-sgtl5000 {
			audio-codec = <&sgtl5000>;
			audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
			compatible = "fsl,imx-audio-sgtl5000";
			model = "On-board Codec";
			mux-ext-port = <3>;
			mux-int-port = <1>;
			ssi-controller = <&ssi1>;
			};
			};

			&audmux {
			status = "okay";
			};

			&can1 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_flexcan1>;
			xceiver-supply = <&reg_can1_3v3>;
			status = "okay";
			};

			&can2 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_flexcan2>;
			xceiver-supply = <&reg_can2_3v3>;
			status = "okay";
			};

			&ecspi1 {
			cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_ecspi1>;
			status = "okay";

			n25q064: flash@0 {
			compatible = "micron,n25q064", "jedec,spi-nor";
			reg = <0>;
			spi-max-frequency = <20000000>;
			};
			};

			&ecspi2 {
			cs-gpios = <
			&gpio5 31 GPIO_ACTIVE_HIGH
			&gpio7 12 GPIO_ACTIVE_HIGH
			&gpio5 18 GPIO_ACTIVE_HIGH
			>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_ecspi2>;
			status = "okay";
			};

			&fec {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_enet>;
			phy-mode = "rgmii";
			interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
			<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
			fsl,err006687-workaround-present;
			status = "okay";
			};

			&hdmi {
			status = "okay";
			};

			&i2c1 {
			clock-frequency = <100000>;
			pinctrl-names = "default", "gpio";
			pinctrl-0 = <&pinctrl_i2c1>;
			pinctrl-1 = <&pinctrl_i2c1_gpio>;
			scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
			sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
			status = "okay";

			m41t00s: rtc@68 {
			compatible = "m41t00";
			reg = <0x68>;
			};

			isl12022: rtc@6f {
			compatible = "isl,isl12022";
			reg = <0x6f>;
			};

			gpio8: gpio@28 {
			compatible = "technologic,ts7970-gpio";
			reg = <0x28>;
			#gpio-cells = <2>;
			gpio-controller;
			ngpio = <32>;
			};

			sgtl5000: codec@a {
			compatible = "fsl,sgtl5000";
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_sgtl5000>;
			reg = <0x0a>;
			clocks = <&clks IMX6QDL_CLK_CKO>;
			VDDA-supply = <&reg_3p3v>;
			VDDIO-supply = <&reg_3p3v>;
			};
			};

			&i2c2 {
			clock-frequency = <100000>;
			pinctrl-names = "default", "gpio";
			pinctrl-0 = <&pinctrl_i2c2>;
			pinctrl-1 = <&pinctrl_i2c2_gpio>;
			scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
			sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
			status = "okay";
			};

			&iomuxc {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_hog>;

			pinctrl_ecspi1: ecspi1grp {
			fsl,pins = <
			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
			MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 /* Onboard Flash CS */
			>;
			};

			pinctrl_ecspi2: ecspi2 {
			fsl,pins = <
			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x100b1 /* FPGA_SPI_CS0 */
			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x100b1 /* FPGA_SPI_CS1 */
			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 /* HD1_SPI_CS */
			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b088 /* FPGA_RESET */
			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10 /* FPGA 24MHZ */
			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b088 /* FPGA_IRQ_0 */
			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b088 /* FPGA_IRQ_1 */
			>;
			};

			pinctrl_enet: enet {
			fsl,pins = <
			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b088
			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b088 /* ETH_PHY_RESET */
			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
			>;
			};

			pinctrl_flexcan1: flexcan1grp {
			fsl,pins = <
			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b088
			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b088
			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b088 /* EN_CAN_1 */
			>;
			};

			pinctrl_flexcan2: flexcan2grp {
			fsl,pins = <
			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b088
			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b088
			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b088 /* EN_CAN_2 */
			>;
			};

			pinctrl_hog: hoggrp {
			fsl,pins = <
			/* Onboard */
			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b088 /* USB_HUB_RESET */
			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b088 /* SEL_DC_USB */
			MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b088 /* EN_USB_5V */
			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b088 /* JTAG_FPGA_TMS */
			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b088 /* JTAG_FPGA_TCK */
			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b088 /* JTAG_FPGA_TDO */
			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b088 /* JTAG_FPGA_TDI */
			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b088 /* GYRO_INT */
			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b088 /* MODBUS_FAULT */
			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b088 /* BUS_DIR/JP_SD_BOOT */
			MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b088 /* EN_MODBUS_24V */
			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b088 /* EN_MODBUS_3V */
			MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b088 /* I210_RESET */
			MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b088 /* EN_RTC_PWR */
			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b088 /* REVSTRAP1 */

			/* Offboard */
			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b088 /* LCD_D09 */
			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b088 /* HD1_IRQ */
			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b088 /* LCD_D10 */
			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x1b088 /* LCD_D11 */
			MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b088 /* BUS_BHE */
			MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b088 /* BUS_ALE */
			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b088 /* BUS_CS */
			MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b088 /* DIO_20 */
			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b088 /* BUS_WAIT */
			MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b088 /* MUX_AD_00 */
			MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b088 /* MUX_AD_01 */
			MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b088 /* MUX_AD_02 */
			MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b088 /* MUX_AD_03 */
			MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b088 /* MUX_AD_04 */
			MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b088 /* MUX_AD_05 */
			MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b088 /* MUX_AD_06 */
			MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b088 /* MUX_AD_07 */
			MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b088 /* MUX_AD_08 */
			MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b088 /* MUX_AD_09 */
			MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b088 /* MUX_AD_10 */
			MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b088 /* MUX_AD_11 */
			MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b088 /* MUX_AD_12 */
			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b088 /* MUX_AD_13 */
			MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b088 /* MUX_AD_14 */
			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b088 /* MUX_AD_15 */

			/* Strapping only */
			MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b088
			MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x1b088
			>;
			};

			pinctrl_i2c1: i2c1grp {
			fsl,pins = <
			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
			>;
			};

			pinctrl_i2c1_gpio: i2c1gpiogrp {
			fsl,pins = <
			MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
			>;
			};

			pinctrl_i2c2: i2c2grp {
			fsl,pins = <
			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
			>;
			};

			pinctrl_i2c2_gpio: i2c2gpiogrp {
			fsl,pins = <
			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
			>;
			};

			pinctrl_leds1: leds1grp {
			fsl,pins = <
			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b088 /* GREEN_LED */
			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b088 /* RED_LED */
			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b088 /* YEL_LED */
			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b088 /* IMX6_BLUE_LED */
			>;
			};

			pinctrl_sgtl5000: sgtl5000grp {
			fsl,pins = <
			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
			MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* Audio CLK */
			>;
			};

			pinctrl_uart1: uart1grp {
			fsl,pins = <
			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b088
			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b088
			>;
			};

			pinctrl_uart2: uart2grp {
			fsl,pins = <
			MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b088
			MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b088
			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b088
			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b088
			>;
			};

			pinctrl_uart3: uart3grp {
			fsl,pins = <
			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b088
			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b088
			MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b088
			MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b088
			>;
			};

			pinctrl_uart4: uart4grp {
			fsl,pins = <
			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b088
			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b088
			>;
			};

			pinctrl_uart5: uart5grp {
			fsl,pins = <
			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b088
			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b088
			>;
			};

			pinctrl_usbotg: usbotggrp {
			fsl,pins = <
			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
			>;
			};

			pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
			MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
			MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x17059 /* WIFI IRQ */
			>;
			};

			pinctrl_usdhc2: usdhc2grp {
			fsl,pins = <
			MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
			MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
			MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b088 /* EN_SD_POWER */
			>;
			};

			pinctrl_usdhc3: usdhc3grp {
			fsl,pins = <
			MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
			MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
			>;
			};
			};

			&pcie {
			status = "okay";
			};

			&snvs_rtc {
			status = "disabled";
			};

			&ssi1 {
			fsl,mode = "i2s-slave";
			status = "okay";
			};

			&uart1 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_uart1>;
			status = "okay";
			};

			&uart2 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_uart2>;
			uart-has-rtscts;
			status = "okay";
			};

			&uart3 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_uart3>;
			status = "okay";
			};

			&uart4 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_uart4>;
			status = "okay";
			};

			&uart5 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_uart5>;
			status = "okay";
			};

			&usbh1 {
			status = "okay";
			};

			&usbotg {
			vbus-supply = <&reg_usb_otg_vbus>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usbotg>;
			disable-over-current;
			status = "okay";
			};

			/* WIFI */
			&usdhc1 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usdhc1>;
			vmmc-supply = <&reg_wlan_vmmc>;
			bus-width = <4>;
			non-removable;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "okay";

			wlcore: wlcore@2 {
			compatible = "ti,wl1271";
			reg = <2>;
			interrupt-parent = <&gpio1>;
			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
			ref-clock-frequency = <38400000>;
			};
			};

			/* SD */
			&usdhc2 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usdhc2>;
			vmmc-supply = <&reg_3p3v>;
			bus-width = <4>;
			fsl,wp-controller;
			status = "okay";
			};

			/* eMMC */
			&usdhc3 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usdhc3>;
			vmmc-supply = <&reg_3p3v>;
			bus-width = <4>;
			non-removable;
			status = "okay";
			};