Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 9f642b5c authored by Dmitry Lifshitz's avatar Dmitry Lifshitz Committed by Tony Lindgren
Browse files

ARM: dts: sbc-t54: add support for sbc-t54 with cm-t54 

Add support for CM-T54 CoM and SBC-T54 board:

http://compulab.co.il/products/computer-on-modules/cm-t54/
http://compulab.co.il/products/sbcs/sbc-t54/



SBC-T54 is a single board computer based on OMAP5432 CPU.
It is implemented with a CM-T54 CoM providing most of the functions,
and SB-T54 carrier board providing connectors and several additional
functions.

Added basic support for:

* PMIC
* LED
* MMC/SD
* eMMC
* USB
* I2C1/4
* SB-T54 and CM-T54 EEPROMs
* RTC

Signed-off-by: default avatarDmitry Lifshitz <lifshitz@compulab.co.il>
[tony@atomide.com: updated for Makefile sorting]
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 69a126cb

arch/arm/boot/dts/Makefile

+3 −1
Original line number Diff line number Diff line
@@ -287,7 +287,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ 
	omap4-var-som.dtb

dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \

	am437x-gp-evm.dtb

dtb-$(CONFIG_SOC_OMAP5) += omap5-uevm.dtb

dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \

	omap5-sbc-t54.dtb \

	omap5-uevm.dtb

dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb

dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb

dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb

arch/arm/boot/dts/omap5-cm-t54.dts

0 → 100644
+362 −0
Original line number Diff line number Diff line 
/*

 * Support for CompuLab CM-T54

 */

/dts-v1/;



#include "omap5.dtsi"

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/interrupt-controller/arm-gic.h>



/ {

	model = "CompuLab CM-T54";

	compatible = "compulab,omap5-cm-t54", "ti,omap5";



	memory {

		device_type = "memory";

		reg = <0x80000000 0x7F000000>; /* 2048 MB */

	};



	vmmcsd_fixed: fixed-regulator-mmcsd {

		compatible = "regulator-fixed";

		regulator-name = "vmmcsd_fixed";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};



	/* HS USB Host PHY on PORT 2 */

	hsusb2_phy: hsusb2_phy {

		compatible = "usb-nop-xceiv";

		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */

	};



	/* HS USB Host PHY on PORT 3 */

	hsusb3_phy: hsusb3_phy {

		compatible = "usb-nop-xceiv";

		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */

	};



	leds {

		compatible = "gpio-leds";

		led@1 {

			label = "Heartbeat";

			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */

			linux,default-trigger = "heartbeat";

			default-state = "off";

		};

	};

};



&omap5_pmx_core {

	pinctrl-names = "default";

	pinctrl-0 = <

			&led_gpio_pins

			&usbhost_pins

	>;



	led_gpio_pins: pinmux_led_gpio_pins {

		pinctrl-single,pins = <

			OMAP5_CORE_IOPAD(0x28b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */

		>;

	};



	i2c1_pins: pinmux_i2c1_pins {

		pinctrl-single,pins = <

			OMAP5_CORE_IOPAD(0x29f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */

			OMAP5_CORE_IOPAD(0x29f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */

		>;

	};



	mmc1_pins: pinmux_mmc1_pins {

		pinctrl-single,pins = <

			OMAP5_CORE_IOPAD(0x29e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */

			OMAP5_CORE_IOPAD(0x29e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */

			OMAP5_CORE_IOPAD(0x29e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */

			OMAP5_CORE_IOPAD(0x29e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */

			OMAP5_CORE_IOPAD(0x29ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */

			OMAP5_CORE_IOPAD(0x29ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */

		>;

	};



	mmc2_pins: pinmux_mmc2_pins {

		pinctrl-single,pins = <

			OMAP5_CORE_IOPAD(0x2840, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */

			OMAP5_CORE_IOPAD(0x2842, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */

			OMAP5_CORE_IOPAD(0x2844, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */

			OMAP5_CORE_IOPAD(0x2846, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */

			OMAP5_CORE_IOPAD(0x2848, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */

			OMAP5_CORE_IOPAD(0x284a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */

			OMAP5_CORE_IOPAD(0x284c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */

			OMAP5_CORE_IOPAD(0x284e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */

			OMAP5_CORE_IOPAD(0x2850, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */

			OMAP5_CORE_IOPAD(0x2852, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */

		>;

	};



	usbhost_pins: pinmux_usbhost_pins {

		pinctrl-single,pins = <

			OMAP5_CORE_IOPAD(0x28c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */

			OMAP5_CORE_IOPAD(0x28c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */



			OMAP5_CORE_IOPAD(0x29dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */

			OMAP5_CORE_IOPAD(0x29de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */



			OMAP5_CORE_IOPAD(0x28a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */

			OMAP5_CORE_IOPAD(0x28b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */

		>;

	};

};



&mmc1 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins>;

	vmmc-supply = <&ldo9_reg>;

	bus-width = <4>;

};



&mmc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_pins>;

	vmmc-supply = <&vmmcsd_fixed>;

	bus-width = <8>;

	ti,non-removable;

};



&mmc4 {

	status = "disabled";

};



&mmc5 {

	status = "disabled";

};



&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins>;



	clock-frequency = <400000>;



	at24@50 {

		compatible = "at24,24c02";

		pagesize = <16>;

		reg = <0x50>;

	};



	palmas: palmas@48 {

		compatible = "ti,palmas";

		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */

		interrupt-parent = <&gic>;

		reg = <0x48>;

		interrupt-controller;

		#interrupt-cells = <2>;

		ti,system-power-controller;



		extcon_usb3: palmas_usb {

			compatible = "ti,palmas-usb-vid";

			ti,enable-vbus-detection;

			ti,enable-id-detection;

			ti,wakeup;

		};



		rtc {

			compatible = "ti,palmas-rtc";

			interrupt-parent = <&palmas>;

			interrupts = <8 IRQ_TYPE_NONE>;

		};



		palmas_pmic {

			compatible = "ti,palmas-pmic";

			interrupt-parent = <&palmas>;

			interrupts = <14 IRQ_TYPE_NONE>;

			interrupt-name = "short-irq";



			ti,ldo6-vibrator;



			regulators {

				smps123_reg: smps123 {

					/* VDD_OPP_MPU */

					regulator-name = "smps123";

					regulator-min-microvolt = < 600000>;

					regulator-max-microvolt = <1500000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps45_reg: smps45 {

					/* VDD_OPP_MM */

					regulator-name = "smps45";

					regulator-min-microvolt = < 600000>;

					regulator-max-microvolt = <1310000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps6_reg: smps6 {

					/* VDD_DDR3 - over VDD_SMPS6 */

					regulator-name = "smps6";

					regulator-min-microvolt = <1500000>;

					regulator-max-microvolt = <1500000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps7_reg: smps7 {

					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */

					regulator-name = "smps7";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps8_reg: smps8 {

					/* VDD_OPP_CORE */

					regulator-name = "smps8";

					regulator-min-microvolt = < 600000>;

					regulator-max-microvolt = <1310000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps9_reg: smps9 {

					/* VDDA_2v1_AUD over VDD_2v1 */

					regulator-name = "smps9";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

					ti,smps-range = <0x80>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps10_out2_reg: smps10_out2 {

					/* VBUS_5V_OTG */

					regulator-name = "smps10_out2";

					regulator-min-microvolt = <5000000>;

					regulator-max-microvolt = <5000000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps10_out1_reg: smps10_out1 {

					/* VBUS_5V_OTG */

					regulator-name = "smps10_out1";

					regulator-min-microvolt = <5000000>;

					regulator-max-microvolt = <5000000>;

				};



				ldo1_reg: ldo1 {

					/* VDDAPHY_CAM: vdda_csiport */

					regulator-name = "ldo1";

					regulator-min-microvolt = <1500000>;

					regulator-max-microvolt = <1800000>;

				};



				ldo2_reg: ldo2 {

					/* VDD_3V3_WLAN */

					regulator-name = "ldo2";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

					regulator-boot-on;

				};



				ldo3_reg: ldo3 {

					/* VCC_1V5_AUD */

					regulator-name = "ldo3";

					regulator-min-microvolt = <1500000>;

					regulator-max-microvolt = <1500000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo4_reg: ldo4 {

					/* VDDAPHY_DISP: vdda_dsiport/hdmi */

					regulator-name = "ldo4";

					regulator-min-microvolt = <1500000>;

					regulator-max-microvolt = <1800000>;

				};



				ldo5_reg: ldo5 {

					/* VDDA_1V8_PHY: usb/sata/hdmi.. */

					regulator-name = "ldo5";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo6_reg: ldo6 {

					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */

					regulator-name = "ldo6";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo7_reg: ldo7 {

					/* VDD_VPP: vpp1 */

					regulator-name = "ldo7";

					regulator-min-microvolt = <2000000>;

					regulator-max-microvolt = <2000000>;

					/* Only for efuse reprograming! */

					status = "disabled";

				};



				ldo8_reg: ldo8 {

					/* VDD_3v0: Does not go anywhere */

					regulator-name = "ldo8";

					regulator-min-microvolt = <3000000>;

					regulator-max-microvolt = <3000000>;

					regulator-boot-on;

					/* Unused */

					status = "disabled";

				};



				ldo9_reg: ldo9 {

					/* VCC_DV_SDIO: vdds_sdcard */

					regulator-name = "ldo9";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <3000000>;

					regulator-boot-on;

				};



				ldoln_reg: ldoln {

					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */

					regulator-name = "ldoln";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldousb_reg: ldousb {

					/* VDDA_3V_USB: VDDA_USBHS33 */

					regulator-name = "ldousb";

					regulator-min-microvolt = <3250000>;

					regulator-max-microvolt = <3250000>;

					regulator-always-on;

					regulator-boot-on;

				};



				regen3_reg: regen3 {

					/* REGEN3 controls LDO9 supply to card */

					regulator-name = "regen3";

					regulator-always-on;

					regulator-boot-on;

				};

			};

		};

	};

};



&usbhshost {

	port2-mode = "ehci-hsic";

	port3-mode = "ehci-hsic";

};



&usbhsehci {

	phys = <0 &hsusb2_phy &hsusb3_phy>;

};



&cpu0 {

	cpu0-supply = <&smps123_reg>;

};

arch/arm/boot/dts/omap5-sbc-t54.dts

0 → 100644
+51 −0
Original line number Diff line number Diff line 
/*

 * Suppport for CompuLab SBC-T54 with CM-T54

 */



#include "omap5-cm-t54.dts"



/ {

	model = "CompuLab SBC-T54 with CM-T54";

	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";

};



&omap5_pmx_core {

	i2c4_pins: pinmux_i2c4_pins {

		pinctrl-single,pins = <

			OMAP5_CORE_IOPAD(0x28f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */

			OMAP5_CORE_IOPAD(0x28fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */

		>;

	};



	mmc1_aux_pins: pinmux_mmc1_aux_pins {

		pinctrl-single,pins = <

			OMAP5_CORE_IOPAD(0x2974, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */

			OMAP5_CORE_IOPAD(0x2976, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */

		>;

	};

};



&mmc1 {

	pinctrl-names = "default";

	pinctrl-0 = <

		&mmc1_pins

		&mmc1_aux_pins

	>;

	cd-inverted;

	wp-inverted;

	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */

	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */

};



&i2c4 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c4_pins>;



	clock-frequency = <400000>;



	at24@50 {

		compatible = "at24,24c02";

		pagesize = <16>;

		reg = <0x50>;

	};

};