Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 94b0bd36 authored by Thomas Petazzoni's avatar Thomas Petazzoni Committed by Jason Cooper
Browse files

ARM: orion5x: convert d2net to Device Tree 



This commit converts the LaCie d2 Network platform to the Device Tree.

All devices except LEDs are converted, because the LED code needs a
non-LED GPIO to be set to a given value for the LEDs to work, and this
cannot yet be easily represented in DT.

Also, references to the LaCie Big Disk Network platform are lost,
because this platform apparently has exactly the same hardware support
as the LaCie d2 Network, so their Device Tree files would be
identical.

Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lkml.kernel.org/r/1398202002-28530-36-git-send-email-thomas.petazzoni@free-electrons.com


Cc: Simon Guinot <sguinot@lacie.com>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 065194a0

arch/arm/boot/dts/Makefile

+2 −1
Original line number Diff line number Diff line
@@ -289,7 +289,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ 
	am43x-epos-evm.dtb \

	am437x-gp-evm.dtb \

	dra7-evm.dtb

dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb \

dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \

	orion5x-lacie-ethernet-disk-mini-v2.dtb \

	orion5x-rd88f5182-nas.dtb

dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb

dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \

arch/arm/boot/dts/orion5x-lacie-d2-network.dts

0 → 100644
+236 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

 * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>

 *

 * This file is licensed under the terms of the GNU General Public

 * License version 2. This program is licensed "as is" without any

 * warranty of any kind, whether express or implied.

 */



/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include "orion5x-mv88f5182.dtsi"



/ {

	model = "LaCie d2 Network";

	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";



	memory {

		reg = <0x00000000 0x4000000>; /* 64 MB */

	};



	chosen {

		bootargs = "console=ttyS0,115200n8 earlyprintk";

		linux,stdout-path = &uart0;

	};



	soc {

		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,

			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,

			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;

	};



	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-0 = <&pmx_buttons>;

		pinctrl-names = "default";

		#address-cells = <1>;

		#size-cells = <0>;

		front_button {

			label = "Front Push Button";

			linux,code = <KEY_POWER>;

			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;

		};



		power_rocker_sw_on {

			label = "Power rocker switch (on|auto)";

			linux,input-type = <5>; /* EV_SW */

			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */

			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;

		};



		power_rocker_sw_off {

			label = "Power rocker switch (auto|off)";

			linux,input-type = <5>; /* EV_SW */

			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */

			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;

		};

	};



	regulators {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;

		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;

		pinctrl-names = "default";



		sata0_power: regulator@0 {

			compatible = "regulator-fixed";

			reg = <0>;

			regulator-name = "SATA0 Power";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;

			enable-active-high;

			regulator-always-on;

			regulator-boot-on;

			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;

		};



		sata1_power: regulator@1 {

			compatible = "regulator-fixed";

			reg = <1>;

			regulator-name = "SATA1 Power";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;

			enable-active-high;

			regulator-always-on;

			regulator-boot-on;

			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;

		};

	};

};



&devbus_bootcs {

	status = "okay";



	devbus,keep-config;



	/*

	 * Currently the MTD code does not recognize the MX29LV400CBCT

	 * as a bottom-type device. This could cause risks of

	 * accidentally erasing critical flash sectors. We thus define

	 * a single, write-protected partition covering the whole

	 * flash.  TODO: once the flash part TOP/BOTTOM detection

	 * issue is sorted out in the MTD code, break this into at

	 * least three partitions: 'u-boot code', 'u-boot environment'

	 * and 'whatever is left'.

	 */

	flash@0 {

		compatible = "cfi-flash";

		reg = <0 0x80000>;

		bank-width = <1>;

                #address-cells = <1>;

		#size-cells = <1>;



		partition@0 {

			label = "Full512Kb";

			reg = <0 0x80000>;

			read-only;

		};

	};

};



&mdio {

	status = "okay";



	ethphy: ethernet-phy {

		reg = <8>;

	};

};



&ehci0 {

	status = "okay";

};



&eth {

	status = "okay";



	ethernet-port@0 {

		phy-handle = <&ethphy>;

	};

};



&i2c {

	status = "okay";

	clock-frequency = <100000>;

	#address-cells = <1>;



	rtc@32 {

		compatible = "ricoh,rs5c372b";

		reg = <0x32>;

	};



	fan@3e {

		compatible = "gmt,g762";

		reg = <0x3e>;



		/* Not enough HW info */

		status = "disabled";

	};



	eeprom@50 {

		compatible = "atmel,24c08";

		reg = <0x50>;

	};

};



&pinctrl {

	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;

	pinctrl-names = "default";



	pmx_board_id: pmx-board-id {

		marvell,pins = "mpp0", "mpp1", "mpp2";

		marvell,function = "gpio";

	};



	pmx_buttons: pmx-buttons {

		marvell,pins = "mpp8", "mpp9", "mpp18";

		marvell,function = "gpio";

	};



	pmx_fan_fail: pmx-fan-fail {

		marvell,pins = "mpp5";

		marvell,function = "gpio";

	};



	/*

	 * MPP6: Red front LED

	 * MPP16: Blue front LED blink control

	 */

	pmx_leds: pmx-leds {

		marvell,pins = "mpp6", "mpp16";

		marvell,function = "gpio";

	};



	pmx_sata0_led_active: pmx-sata0-led-active {

		marvell,pins = "mpp14";

		marvell,function = "sata0";

	};



	pmx_sata0_power: pmx-sata0-power {

		marvell,pins = "mpp3";

		marvell,function = "gpio";

	};



	pmx_sata1_led_active: pmx-sata1-led-active {

		marvell,pins = "mpp15";

		marvell,function = "sata1";

	};



	pmx_sata1_power: pmx-sata1-power {

		marvell,pins = "mpp12";

		marvell,function = "gpio";

	};



	/*

	 * Non MPP GPIOs:

	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)

	 *  GPIO 23: Blue front LED off

	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)

	 */

};



&sata {

	pinctrl-0 = <&pmx_sata0_led_active

		     &pmx_sata1_led_active>;

	pinctrl-names = "default";

	status = "okay";

	nr-ports = <2>;

};



&uart0 {

	status = "okay";

};

arch/arm/mach-orion5x/Kconfig

+3 −10
Original line number Diff line number Diff line
@@ -115,20 +115,13 @@ config MACH_MV2120 
	  Say 'Y' here if you want your kernel to support the

	  HP Media Vault mv2120 or mv5100.



config MACH_D2NET

	bool "LaCie d2 Network"

	select I2C_BOARDINFO

config MACH_D2NET_DT

	bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)"

	select ARCH_ORION5X_DT

	help

	  Say 'Y' here if you want your kernel to support the

	  LaCie d2 Network NAS.



config MACH_BIGDISK

	bool "LaCie Big Disk Network"

	select I2C_BOARDINFO

	help

	  Say 'Y' here if you want your kernel to support the

	  LaCie Big Disk Network NAS.



config MACH_NET2BIG

	bool "LaCie 2Big Network"

	select I2C_BOARDINFO

arch/arm/mach-orion5x/Makefile

+1 −2
Original line number Diff line number Diff line
@@ -12,8 +12,6 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o 
obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o

obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o

obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o

obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o

obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o

obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o

obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o

obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
@@ -23,4 +21,5 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o 
obj-$(CONFIG_MACH_LINKSTATION_LSCHL)	+= ls-chl-setup.o



obj-$(CONFIG_ARCH_ORION5X_DT)		+= board-dt.o

obj-$(CONFIG_MACH_D2NET_DT)	+= board-d2net.o

obj-$(CONFIG_MACH_RD88F5182_DT)	+= board-rd88f5182.o

arch/arm/mach-orion5x/d2net-setup.c→arch/arm/mach-orion5x/board-d2net.c

+109 −0
Original line number Diff line number Diff line 
/*

 * arch/arm/mach-orion5x/d2net-setup.c

 * arch/arm/mach-orion5x/board-d2net.c

 *

 * LaCie d2Network and Big Disk Network NAS setup

 *
@@ -15,13 +15,7 @@ 
#include <linux/platform_device.h>

#include <linux/pci.h>

#include <linux/irq.h>

#include <linux/mtd/physmap.h>

#include <linux/mv643xx_eth.h>

#include <linux/leds.h>

#include <linux/gpio_keys.h>

#include <linux/input.h>

#include <linux/i2c.h>

#include <linux/ata_platform.h>

#include <linux/gpio.h>

#include <asm/mach-types.h>

#include <asm/mach/arch.h>
@@ -29,121 +23,11 @@ 
#include <mach/orion5x.h>

#include <plat/orion-gpio.h>

#include "common.h"

#include "mpp.h"



/*****************************************************************************

 * LaCie d2 Network Info

 ****************************************************************************/



/*

 * 512KB NOR flash Device bus boot chip select

 */



#define D2NET_NOR_BOOT_BASE		0xfff80000

#define D2NET_NOR_BOOT_SIZE		SZ_512K



/*****************************************************************************

 * 512KB NOR Flash on Boot Device

 ****************************************************************************/



/*

 * TODO: Check write support on flash MX29LV400CBTC-70G

 */



static struct mtd_partition d2net_partitions[] = {

	{

		.name		= "Full512kb",

		.size		= MTDPART_SIZ_FULL,

		.offset		= 0,

		.mask_flags	= MTD_WRITEABLE,

	},

};



static struct physmap_flash_data d2net_nor_flash_data = {

	.width		= 1,

	.parts		= d2net_partitions,

	.nr_parts	= ARRAY_SIZE(d2net_partitions),

};



static struct resource d2net_nor_flash_resource = {

	.flags			= IORESOURCE_MEM,

	.start			= D2NET_NOR_BOOT_BASE,

	.end			= D2NET_NOR_BOOT_BASE

					+ D2NET_NOR_BOOT_SIZE - 1,

};



static struct platform_device d2net_nor_flash = {

	.name			= "physmap-flash",

	.id			= 0,

	.dev		= {

		.platform_data	= &d2net_nor_flash_data,

	},

	.num_resources		= 1,

	.resource		= &d2net_nor_flash_resource,

};



/*****************************************************************************

 * Ethernet

 ****************************************************************************/



static struct mv643xx_eth_platform_data d2net_eth_data = {

	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),

};



/*****************************************************************************

 * I2C devices

 ****************************************************************************/



/*

 * i2c addr | chip         | description

 * 0x32     | Ricoh 5C372b | RTC

 * 0x3e     | GMT G762     | PWM fan controller

 * 0x50     | HT24LC08     | eeprom (1kB)

 *

 * TODO: Add G762 support to the g760a driver.

 */

static struct i2c_board_info __initdata d2net_i2c_devices[] = {

	{

		I2C_BOARD_INFO("rs5c372b", 0x32),

	}, {

		I2C_BOARD_INFO("24c08", 0x50),

	},

};



/*****************************************************************************

 * SATA

 ****************************************************************************/



static struct mv_sata_platform_data d2net_sata_data = {

	.n_ports	= 2,

};



#define D2NET_GPIO_SATA0_POWER	3

#define D2NET_GPIO_SATA1_POWER	12



static void __init d2net_sata_power_init(void)

{

	int err;



	err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");

	if (err == 0) {

		err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);

		if (err)

			gpio_free(D2NET_GPIO_SATA0_POWER);

	}

	if (err)

		pr_err("d2net: failed to configure SATA0 power GPIO\n");



	err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");

	if (err == 0) {

		err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);

		if (err)

			gpio_free(D2NET_GPIO_SATA1_POWER);

	}

	if (err)

		pr_err("d2net: failed to configure SATA1 power GPIO\n");

}



/*****************************************************************************

 * GPIO LED's

 ****************************************************************************/
@@ -200,9 +84,6 @@ static void __init d2net_gpio_leds_init(void) 
{

	int err;



	/* Configure GPIO over MPP max number. */

	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);



	/* Configure register blink_ctrl to allow SATA activity LED blinking. */

	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");

	if (err == 0) {
@@ -216,150 +97,13 @@ static void __init d2net_gpio_leds_init(void) 
	platform_device_register(&d2net_gpio_leds);

}



/****************************************************************************

 * GPIO keys

 ****************************************************************************/



#define D2NET_GPIO_PUSH_BUTTON		18

#define D2NET_GPIO_POWER_SWITCH_ON	8

#define D2NET_GPIO_POWER_SWITCH_OFF	9



#define D2NET_SWITCH_POWER_ON		0x1

#define D2NET_SWITCH_POWER_OFF		0x2



static struct gpio_keys_button d2net_buttons[] = {

	{

		.type		= EV_SW,

		.code		= D2NET_SWITCH_POWER_OFF,

		.gpio		= D2NET_GPIO_POWER_SWITCH_OFF,

		.desc		= "Power rocker switch (auto|off)",

		.active_low	= 0,

	},

	{

		.type		= EV_SW,

		.code		= D2NET_SWITCH_POWER_ON,

		.gpio		= D2NET_GPIO_POWER_SWITCH_ON,

		.desc		= "Power rocker switch (on|auto)",

		.active_low	= 0,

	},

	{

		.type		= EV_KEY,

		.code		= KEY_POWER,

		.gpio		= D2NET_GPIO_PUSH_BUTTON,

		.desc		= "Front Push Button",

		.active_low	= 0,

	},

};



static struct gpio_keys_platform_data d2net_button_data = {

	.buttons	= d2net_buttons,

	.nbuttons	= ARRAY_SIZE(d2net_buttons),

};



static struct platform_device d2net_gpio_buttons = {

	.name		= "gpio-keys",

	.id		= -1,

	.dev		= {

		.platform_data	= &d2net_button_data,

	},

};



/*****************************************************************************

 * General Setup

 ****************************************************************************/



static unsigned int d2net_mpp_modes[] __initdata = {

	MPP0_GPIO,	/* Board ID (bit 0) */

	MPP1_GPIO,	/* Board ID (bit 1) */

	MPP2_GPIO,	/* Board ID (bit 2) */

	MPP3_GPIO,	/* SATA 0 power */

	MPP4_UNUSED,

	MPP5_GPIO,	/* Fan fail detection */

	MPP6_GPIO,	/* Red front LED */

	MPP7_UNUSED,

	MPP8_GPIO,	/* Rear power switch (on|auto) */

	MPP9_GPIO,	/* Rear power switch (auto|off) */

	MPP10_UNUSED,

	MPP11_UNUSED,

	MPP12_GPIO,	/* SATA 1 power */

	MPP13_UNUSED,

	MPP14_SATA_LED,	/* SATA 0 active */

	MPP15_SATA_LED,	/* SATA 1 active */

	MPP16_GPIO,	/* Blue front LED blink control */

	MPP17_UNUSED,

	MPP18_GPIO,	/* Front button (0 = Released, 1 = Pushed ) */

	MPP19_UNUSED,

	0,

	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */

	/* 23: Blue front LED off */

	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */

};



#define D2NET_GPIO_INHIBIT_POWER_OFF    24



static void __init d2net_init(void)

void __init d2net_init(void)

{

	/*

	 * Setup basic Orion functions. Need to be called early.

	 */

	orion5x_init();



	orion5x_mpp_conf(d2net_mpp_modes);



	/*

	 * Configure peripherals.

	 */

	orion5x_ehci0_init();

	orion5x_eth_init(&d2net_eth_data);

	orion5x_i2c_init();

	orion5x_uart0_init();



	d2net_sata_power_init();

	orion5x_sata_init(&d2net_sata_data);



	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,

				    ORION_MBUS_DEVBUS_BOOT_ATTR,

				    D2NET_NOR_BOOT_BASE,

				    D2NET_NOR_BOOT_SIZE);

	platform_device_register(&d2net_nor_flash);



	platform_device_register(&d2net_gpio_buttons);



	d2net_gpio_leds_init();



	pr_notice("d2net: Flash write are not yet supported.\n");



	i2c_register_board_info(0, d2net_i2c_devices,

				ARRAY_SIZE(d2net_i2c_devices));



	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);

}
 


/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */



#ifdef CONFIG_MACH_D2NET

MACHINE_START(D2NET, "LaCie d2 Network")

	.atag_offset	= 0x100,

	.init_machine	= d2net_init,

	.map_io		= orion5x_map_io,

	.init_early	= orion5x_init_early,

	.init_irq	= orion5x_init_irq,

	.init_time	= orion5x_timer_init,

	.fixup		= tag_fixup_mem32,

	.restart	= orion5x_restart,

MACHINE_END

#endif



#ifdef CONFIG_MACH_BIGDISK

MACHINE_START(BIGDISK, "LaCie Big Disk Network")

	.atag_offset	= 0x100,

	.init_machine	= d2net_init,

	.map_io		= orion5x_map_io,

	.init_early	= orion5x_init_early,

	.init_irq	= orion5x_init_irq,

	.init_time	= orion5x_timer_init,

	.fixup		= tag_fixup_mem32,

	.restart	= orion5x_restart,

MACHINE_END

#endif