Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 899b907f authored by Yuxin Feng's avatar Yuxin Feng Committed by Hongwei Ren
Browse files

ARM: dts: msm: Enable usb host for scuba 

Add extcon for usb qusb_phy0 and usb0

Change-Id: I114edc610532740748db76c980cce754a45205e7
parent 438d6a39

qcom/pm8008.dtsi

0 → 100644
+127 −0
Original line number Diff line number Diff line 
#include <dt-bindings/interrupt-controller/irq.h>



pm8008_8: qcom,pm8008@8 {

	compatible = "qcom,i2c-pmic";

	reg = <0x8>;

	#address-cells = <1>;

	#size-cells = <0>;

	interrupt-controller;

	#interrupt-cells = <3>;



	interrupt-names = "pm8008";

	qcom,periph-map = <0x09 0x24 0xc0 0xc1>;



	pm8008_chip: qcom,pm8008-chip@900 {

		compatible = "qcom,pm8008-chip";

		reg = <0x900>;

		interrupts = <0x09 4 IRQ_TYPE_EDGE_RISING>;

		interrupt-names = "ocp";



		PM8008_EN: qcom,pm8008-chip-en {

			regulator-name = "pm8008-chip-en";

		};

	};



	qcom,revid@100 {

		compatible = "qcom,qpnp-revid";

		reg = <0x100>;

	};



	pm8008_gpios: pinctrl@c000 {

		compatible = "qcom,spmi-gpio";

		reg = <0xc000 0x200>;

		interrupts = <0xc0 0 IRQ_TYPE_EDGE_RISING>,

				<0xc1 0 IRQ_TYPE_EDGE_RISING>;

		interrupt-names = "pm8008_gpio1", "pm8008_gpio2";

		gpio-controller;

		#gpio-cells = <2>;



		pm8008_gpio1_active: pm8008_gpio1_active {

			pins = "gpio1";

			function = "func1";

			power-source = <1>;

			output-enable;

			input-disable;

			bias-disable;

		};

	};

};



pm8008_9: qcom,pm8008@9 {

	compatible = "qcom,i2c-pmic";

	reg = <0x9>;

	#address-cells = <1>;

	#size-cells = <0>;



	pinctrl-names = "default";

	pinctrl-0 = <&pm8008_gpio1_active>;



	pm8008_regulators: qcom,pm8008-regulator {

		compatible = "qcom,pm8008-regulator";

		pm8008_en-supply = <&PM8008_EN>;

		qcom,enable-ocp-broadcast;



		L1P: qcom,pm8008-l1@4000 {

			reg = <0x4000>;

			regulator-name = "pm8008_l1";

			regulator-min-microvolt = <528000>;

			regulator-max-microvolt = <1504000>;

			qcom,min-dropout-voltage = <225000>;

			qcom,hpm-min-load = <10000>;

		};



		L2P: qcom,pm8008-l2@4100 {

			reg = <0x4100>;

			regulator-name = "pm8008_l2";

			regulator-min-microvolt = <528000>;

			regulator-max-microvolt = <1504000>;

			qcom,min-dropout-voltage = <225000>;

			qcom,hpm-min-load = <10000>;

		};



		L3P: qcom,pm8008-l3@4200 {

			reg = <0x4200>;

			regulator-name = "pm8008_l3";

			regulator-min-microvolt = <1500000>;

			regulator-max-microvolt = <3400000>;

			qcom,min-dropout-voltage = <200000>;

			qcom,hpm-min-load = <10000>;

		};



		L4P: qcom,pm8008-l4@4300 {

			reg = <0x4300>;

			regulator-name = "pm8008_l4";

			regulator-min-microvolt = <1500000>;

			regulator-max-microvolt = <3400000>;

			qcom,min-dropout-voltage = <200000>;

			qcom,hpm-min-load = <10000>;

		};



		L5P: qcom,pm8008-l5@4400 {

			reg = <0x4400>;

			regulator-name = "pm8008_l5";

			regulator-min-microvolt = <1500000>;

			regulator-max-microvolt = <3400000>;

			qcom,min-dropout-voltage = <300000>;

			qcom,hpm-min-load = <10000>;

		};



		L6P: qcom,pm8008-l6@4400 {

			reg = <0x4500>;

			regulator-name = "pm8008_l6";

			regulator-min-microvolt = <1500000>;

			regulator-max-microvolt = <3400000>;

			qcom,min-dropout-voltage = <300000>;

			qcom,hpm-min-load = <10000>;

		};



		L7P: qcom,pm8008-l7@4400 {

			reg = <0x4600>;

			regulator-name = "pm8008_l7";

			regulator-min-microvolt = <1500000>;

			regulator-max-microvolt = <3400000>;

			qcom,min-dropout-voltage = <300000>;

			qcom,hpm-min-load = <10000>;

		};

	};

};

qcom/qrb2210-rb1-idp.dtsi

+8 −0
Original line number Diff line number Diff line
@@ -77,3 +77,11 @@ 
			"chg_temp";

	qcom,thermal-mitigation = <2000000 1500000 1000000 500000>;

};



&qusb_phy0 {

	extcon = <&pm2250_charger>;

};



&usb0 {

	extcon = <&qusb_phy0>, <&eud>;

};

qcom/qrb2210-rb1-usb.dtsi

+9 −0
Original line number Diff line number Diff line
@@ -53,6 +53,15 @@ 
				<&system_noc MASTER_USB3 &config_noc SLAVE_IPA_CFG>,

				<&bimc MASTER_AMPSS_M0 &config_noc SLAVE_USB3>;



		qcom,interconnect-values-nom = /* NOMINAL Votes */

						<1000000 1550000>,

						<0 2400>,

						<0 40000>;

		qcom,interconnect-values-svs = /* SVS Votes */

						<240000 700000>,

						<0 2400>,

						<0 40000>;



		dwc3@4e00000 {

			compatible = "snps,dwc3";

			reg = <0x4e00000 0xcd00>;

qcom/qrb2210-rb1.dtsi

+33 −100
Original line number Diff line number Diff line
@@ -660,6 +660,23 @@ 


	};



	eud: qcom,msm-eud@1610000 {

		compatible = "qcom,msm-eud";

		interrupt-names = "eud_irq";

		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;

		reg = <0x1610000 0x2000>,

		      <0x1612000 0x1000>,

		      <0x3E5018 0x4>;

		reg-names = "eud_base", "eud_mode_mgr2",

				"eud_tcsr_check_reg";

		qcom,secure-eud-en;

		qcom,eud-tcsr-check-enable;

		qcom,eud-clock-vote-req;

		clocks = <&gcc GCC_AHB2PHY_USB_CLK>;

		clock-names = "eud_ahb2phy_clk";

		status = "ok";

	};



	wdog: qcom,wdt@f017000 {

		compatible = "qcom,msm-watchdog";

		reg = <0xf017000 0x1000>;
@@ -688,6 +705,11 @@ dcc: dcc_v2@1be2000 { 
		rpm-channel-type = <15>; /* SMD_APPS_RPM */

	};



	qcom,sps {

		compatible = "qcom,msm-sps-4k";

		qcom,pipe-attr-ee;

	};



	mem_dump {

		compatible = "qcom,mem-dump";

		memory-region = <&dump_mem>;
@@ -1346,108 +1368,19 @@ dcc: dcc_v2@1be2000 { 
	#size-cells = <0>;

	status = "ok";



	pm8008_8: qcom,pm8008@8 {

		compatible = "qcom,i2c-pmic";

		reg = <0x8>;

		#address-cells = <1>;

		#size-cells = <0>;



		pinctrl-names = "default";

		pinctrl-0 = <&pm8008_active>;



		pm8008_chip: qcom,pm8008-chip@900 {

			compatible = "qcom,pm8008-chip";

			reg = <0x900>;



			PM8008_EN: qcom,pm8008-chip-en {

				regulator-name = "pm8008-chip-en";

			};

	#include "pm8008.dtsi"

};



		qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100>;

		};

	};

&pm8008_8 {

	interrupt-parent = <&tlmm>;

	interrupts = <25 IRQ_TYPE_EDGE_RISING>;



	pm8008_9: qcom,pm8008@9 {

		compatible = "qcom,i2c-pmic";

		reg = <0x9>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8008_regulators: qcom,pm8008-regulator {

			compatible = "qcom,pm8008-regulator";

			#address-cells = <1>;

			#size-cells = <0>;

			pm8008_en-supply = <&PM8008_EN>;



			vdd_l1_l2-supply = <&S3A>;



			L1P: qcom,pm8008-l1@4000 {

				reg = <0x4000>;

				regulator-name = "pm8008_l1";

				regulator-min-microvolt = <528000>;

				regulator-max-microvolt = <1256000>;

				qcom,min-dropout-voltage = <75000>;

				qcom,hpm-min-load = <10000>;

			};



			L2P: qcom,pm8008-l2@4100 {

				reg = <0x4100>;

				regulator-name = "pm8008_l2";

				regulator-min-microvolt = <528000>;

				regulator-max-microvolt = <1144000>;

				qcom,min-dropout-voltage = <187500>;

				qcom,hpm-min-load = <10000>;

			};



			L3P: qcom,pm8008-l3@4200 {

				reg = <0x4200>;

				regulator-name = "pm8008_l3";

				regulator-min-microvolt = <2704000>;

				regulator-max-microvolt = <2896000>;

				qcom,min-dropout-voltage = <200000>;

				qcom,hpm-min-load = <10000>;

			};



			L4P: qcom,pm8008-l4@4300 {

				reg = <0x4300>;

				regulator-name = "pm8008_l4";

				regulator-min-microvolt = <2704000>;

				regulator-max-microvolt = <2896000>;

				qcom,min-dropout-voltage = <200000>;

				qcom,hpm-min-load = <10000>;

			};



			L5P: qcom,pm8008-l5@4400 {

				reg = <0x4400>;

				regulator-name = "pm8008_l5";

				regulator-min-microvolt = <2704000>;

				regulator-max-microvolt = <2896000>;

				qcom,min-dropout-voltage = <300000>;

				qcom,hpm-min-load = <10000>;

			};



			L6P: qcom,pm8008-l6@4500 {

				reg = <0x4500>;

				regulator-name = "pm8008_l6";

				regulator-min-microvolt = <2704000>;

				regulator-max-microvolt = <2896000>;

				qcom,min-dropout-voltage = <300000>;

				qcom,hpm-min-load = <10000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pm8008_active &pm8008_interrupt>;

};



			L7P: qcom,pm8008-l7@4600 {

				reg = <0x4600>;

				regulator-name = "pm8008_l7";

				regulator-min-microvolt = <1656000>;

				regulator-max-microvolt = <1896000>;

				qcom,min-dropout-voltage = <300000>;

				qcom,hpm-min-load = <10000>;

			};

		};

	};

&pm8008_regulators {

	vdd_l1_l2-supply = <&S3A>;

};



&gcc_camss_top_gdsc {