Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 890e48be authored by Paul Cercueil's avatar Paul Cercueil Committed by Linus Walleij
Browse files

dt-bindings: pinctrl: Update pinctrl-ingenic for JZ4725B and GPIO merge 



The pinctrl-ingenic driver now supports the JZ4725B SoC.

Furthermore, the gpio-ingenic driver was dropped and the pinctrl-ingenic
driver is now responsible for providing the GPIO functionality.

Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 5b394b2d

Documentation/devicetree/bindings/gpio/ingenic,gpio.txt

deleted100644 → 0
+0 −46
Original line number Diff line number Diff line 
Ingenic jz47xx GPIO controller



That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl

driver node.



Required properties:

--------------------



 - compatible: Must contain one of:

    - "ingenic,jz4740-gpio"

    - "ingenic,jz4770-gpio"

    - "ingenic,jz4780-gpio"

 - reg: The GPIO bank number.

 - interrupt-controller: Marks the device node as an interrupt controller.

 - interrupts: Interrupt specifier for the controllers interrupt.

 - #interrupt-cells: Should be 2. Refer to

   ../interrupt-controller/interrupts.txt for more details.

 - gpio-controller: Marks the device node as a GPIO controller.

 - #gpio-cells: Should be 2. The first cell is the GPIO number and the second

    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the

    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.

 - gpio-ranges: Range of pins managed by the GPIO controller. Refer to

   'gpio.txt' in this directory for more details.



Example:

--------



&pinctrl {

	#address-cells = <1>;

	#size-cells = <0>;



	gpa: gpio@0 {

		compatible = "ingenic,jz4740-gpio";

		reg = <0>;



		gpio-controller;

		gpio-ranges = <&pinctrl 0 0 32>;

		#gpio-cells = <2>;



		interrupt-controller;

		#interrupt-cells = <2>;



		interrupt-parent = <&intc>;

		interrupts = <28>;

	};

};

Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt

+35 −4
Original line number Diff line number Diff line
@@ -20,16 +20,30 @@ Required properties: 


 - compatible: One of:

    - "ingenic,jz4740-pinctrl"

    - "ingenic,jz4725b-pinctrl"

    - "ingenic,jz4770-pinctrl"

    - "ingenic,jz4780-pinctrl"

 - reg: Address range of the pinctrl registers.





GPIO sub-nodes

--------------

Required properties for sub-nodes (GPIO chips):

-----------------------------------------------



The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver;

please refer to ../gpio/ingenic,gpio.txt.

 - compatible: Must contain one of:

    - "ingenic,jz4740-gpio"

    - "ingenic,jz4770-gpio"

    - "ingenic,jz4780-gpio"

 - reg: The GPIO bank number.

 - interrupt-controller: Marks the device node as an interrupt controller.

 - interrupts: Interrupt specifier for the controllers interrupt.

 - #interrupt-cells: Should be 2. Refer to

   ../interrupt-controller/interrupts.txt for more details.

 - gpio-controller: Marks the device node as a GPIO controller.

 - #gpio-cells: Should be 2. The first cell is the GPIO number and the second

    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the

    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.

 - gpio-ranges: Range of pins managed by the GPIO controller. Refer to

   ../gpio/gpio.txt for more details.





Example:
@@ -38,4 +52,21 @@ Example: 
pinctrl: pin-controller@10010000 {

	compatible = "ingenic,jz4740-pinctrl";

	reg = <0x10010000 0x400>;

	#address-cells = <1>;

	#size-cells = <0>;



	gpa: gpio@0 {

		compatible = "ingenic,jz4740-gpio";

		reg = <0>;



		gpio-controller;

		gpio-ranges = <&pinctrl 0 0 32>;

		#gpio-cells = <2>;



		interrupt-controller;

		#interrupt-cells = <2>;



		interrupt-parent = <&intc>;

		interrupts = <28>;

	};

};