Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 86b93a48 authored by Jaehoon Chung's avatar Jaehoon Chung Committed by Ulf Hansson
Browse files

mmc: dw_mmc: remove the deprecated "clock-freq-min-max" property



'clock-freq-min-max' property had already deprecated.
Remove the 'clock-freq-min-max' property that is kept to maintain
the compatibility.

Signed-off-by: default avatarJaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent 611d059f
Loading
Loading
Loading
Loading
+0 −4
Original line number Diff line number Diff line
@@ -59,10 +59,6 @@ Optional properties:
  is specified and the ciu clock is specified then we'll try to set the ciu
  clock to this at probe time.

* clock-freq-min-max (DEPRECATED): Minimum and Maximum clock frequency for card output
  clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
	  (Use the "max-frequency" instead of "clock-freq-min-max".)

* num-slots (DEPRECATED): specifies the number of slots supported by the controller.
  The number of physical slots actually used could be equal or less than the
  value specified by num-slots. If this property is not specified, the value
+4 −11
Original line number Diff line number Diff line
@@ -2799,6 +2799,10 @@ static int dw_mci_init_slot_caps(struct dw_mci_slot *slot)
	if (host->pdata->caps2)
		mmc->caps2 = host->pdata->caps2;

	mmc->f_min = DW_MCI_FREQ_MIN;
	if (!mmc->f_max)
		mmc->f_max = DW_MCI_FREQ_MAX;

	/* Process SDIO IRQs through the sdio_irq_work. */
	if (mmc->caps & MMC_CAP_SDIO_IRQ)
		mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
@@ -2811,7 +2815,6 @@ static int dw_mci_init_slot(struct dw_mci *host)
	struct mmc_host *mmc;
	struct dw_mci_slot *slot;
	int ret;
	u32 freq[2];

	mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
	if (!mmc)
@@ -2825,16 +2828,6 @@ static int dw_mci_init_slot(struct dw_mci *host)
	host->slot = slot;

	mmc->ops = &dw_mci_ops;
	if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
					   freq, 2)) {
		mmc->f_min = DW_MCI_FREQ_MIN;
		mmc->f_max = DW_MCI_FREQ_MAX;
	} else {
		dev_info(host->dev,
			"'clock-freq-min-max' property was deprecated.\n");
		mmc->f_min = freq[0];
		mmc->f_max = freq[1];
	}

	/*if there are external regulators, get them*/
	ret = mmc_regulator_get_supply(mmc);