Merge by Hand (849a8924) · Commits · e / devices / android_kernel_fairphone_FP5

Documentation/scsi/LICENSE.qla2xxx

0 → 100644

+45 −0

Original line number	Diff line number	Diff line
		Copyright (c) 2003-2005 QLogic Corporation
		QLogic Linux Fibre Channel HBA Driver

		This program includes a device driver for Linux 2.6 that may be
		distributed with QLogic hardware specific firmware binary file.
		You may modify and redistribute the device driver code under the
		GNU General Public License as published by the Free Software
		Foundation (version 2 or a later version).

		You may redistribute the hardware specific firmware binary file
		under the following terms:

		1. Redistribution of source code (only if applicable),
		must retain the above copyright notice, this list of
		conditions and the following disclaimer.

		2. Redistribution in binary form must reproduce the above
		copyright notice, this list of conditions and the
		following disclaimer in the documentation and/or other
		materials provided with the distribution.

		3. The name of QLogic Corporation may not be used to
		endorse or promote products derived from this software
		without specific prior written permission

		REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
		THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
		EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
		IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
		PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
		BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
		EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
		TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
		DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
		ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
		OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
		OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
		POSSIBILITY OF SUCH DAMAGE.

		USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
		CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
		OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
		TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
		ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
		COMBINATION WITH THIS PROGRAM.

drivers/message/fusion/mptbase.h

+14 −2

Original line number	Diff line number	Diff line
		@@ -77,8 +77,8 @@
		#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
		#endif

		#define MPT_LINUX_VERSION_COMMON "3.03.03"
		#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.03"
		#define MPT_LINUX_VERSION_COMMON "3.03.04"
		#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.04"
		#define WHAT_MAGIC_STRING "@" "(" "#" ")"

		#define show_mptmod_ver(s,ver) \
		@@ -421,6 +421,17 @@ typedef struct _MPT_IOCTL {
		struct semaphore sem_ioc;
		} MPT_IOCTL;

		#define MPT_SAS_MGMT_STATUS_RF_VALID 0x02 /* The Reply Frame is VALID */
		#define MPT_SAS_MGMT_STATUS_COMMAND_GOOD 0x10 /* Command Status GOOD */
		#define MPT_SAS_MGMT_STATUS_TM_FAILED 0x40 /* User TM request failed */

		typedef struct _MPT_SAS_MGMT {
		struct semaphore mutex;
		struct completion done;
		u8 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
		u8 status; /* current command status */
		}MPT_SAS_MGMT;

		/*
		* Event Structure and define
		*/
		@@ -604,6 +615,7 @@ typedef struct _MPT_ADAPTER
		struct list_head list;
		struct net_device *netdev;
		struct list_head sas_topology;
		MPT_SAS_MGMT sas_mgmt;
		} MPT_ADAPTER;

		/*

drivers/message/fusion/mptsas.c

+249 −74

Original line number	Diff line number	Diff line
		@@ -83,6 +83,7 @@ MODULE_PARM_DESC(mpt_pt_clear,
		static int mptsasDoneCtx = -1;
		static int mptsasTaskCtx = -1;
		static int mptsasInternalCtx = -1; /* Used only for internal commands */
		static int mptsasMgmtCtx = -1;


		/*
		@@ -123,6 +124,104 @@ struct mptsas_portinfo {
		struct mptsas_phyinfo *phy_info;
		};


		#ifdef SASDEBUG
		static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
		{
		printk("---- IO UNIT PAGE 0 ------------\n");
		printk("Handle=0x%X\n",
		le16_to_cpu(phy_data->AttachedDeviceHandle));
		printk("Controller Handle=0x%X\n",
		le16_to_cpu(phy_data->ControllerDevHandle));
		printk("Port=0x%X\n", phy_data->Port);
		printk("Port Flags=0x%X\n", phy_data->PortFlags);
		printk("PHY Flags=0x%X\n", phy_data->PhyFlags);
		printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate);
		printk("Controller PHY Device Info=0x%X\n",
		le32_to_cpu(phy_data->ControllerPhyDeviceInfo));
		printk("DiscoveryStatus=0x%X\n",
		le32_to_cpu(phy_data->DiscoveryStatus));
		printk("\n");
		}

		static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0)
		{
		__le64 sas_address;

		memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));

		printk("---- SAS PHY PAGE 0 ------------\n");
		printk("Attached Device Handle=0x%X\n",
		le16_to_cpu(pg0->AttachedDevHandle));
		printk("SAS Address=0x%llX\n",
		(unsigned long long)le64_to_cpu(sas_address));
		printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier);
		printk("Attached Device Info=0x%X\n",
		le32_to_cpu(pg0->AttachedDeviceInfo));
		printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate);
		printk("Change Count=0x%X\n", pg0->ChangeCount);
		printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo));
		printk("\n");
		}

		static void mptsas_print_phy_pg1(SasPhyPage1_t *pg1)
		{
		printk("---- SAS PHY PAGE 1 ------------\n");
		printk("Invalid Dword Count=0x%x\n", pg1->InvalidDwordCount);
		printk("Running Disparity Error Count=0x%x\n",
		pg1->RunningDisparityErrorCount);
		printk("Loss Dword Synch Count=0x%x\n", pg1->LossDwordSynchCount);
		printk("PHY Reset Problem Count=0x%x\n", pg1->PhyResetProblemCount);
		printk("\n");
		}

		static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
		{
		__le64 sas_address;

		memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));

		printk("---- SAS DEVICE PAGE 0 ---------\n");
		printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle));
		printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
		printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
		printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
		printk("Target ID=0x%X\n", pg0->TargetID);
		printk("Bus=0x%X\n", pg0->Bus);
		/* The PhyNum field specifies the PHY number of the parent
		* device this device is linked to
		*/
		printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
		printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
		printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
		printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
		printk("Physical Port=0x%X\n", pg0->PhysicalPort);
		printk("\n");
		}

		static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
		{
		printk("---- SAS EXPANDER PAGE 1 ------------\n");

		printk("Physical Port=0x%X\n", pg1->PhysicalPort);
		printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
		printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
		printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
		printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
		printk("Owner Device Handle=0x%X\n",
		le16_to_cpu(pg1->OwnerDevHandle));
		printk("Attached Device Handle=0x%X\n",
		le16_to_cpu(pg1->AttachedDevHandle));
		}
		#else
		#define mptsas_print_phy_data(phy_data) do { } while (0)
		#define mptsas_print_phy_pg0(pg0) do { } while (0)
		#define mptsas_print_phy_pg1(pg1) do { } while (0)
		#define mptsas_print_device_pg0(pg0) do { } while (0)
		#define mptsas_print_expander_pg1(pg1) do { } while (0)
		#endif


		/*
		* This is pretty ugly. We will be able to seriously clean it up
		* once the DV code in mptscsih goes away and we can properly
		@@ -200,91 +299,159 @@ static struct scsi_host_template mptsas_driver_template = {
		.use_clustering = ENABLE_CLUSTERING,
		};

		static struct sas_function_template mptsas_transport_functions = {
		};

		static struct scsi_transport_template *mptsas_transport_template;

		#ifdef SASDEBUG
		static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
		static inline MPT_ADAPTER phy_to_ioc(struct sas_phy phy)
		{
		printk("---- IO UNIT PAGE 0 ------------\n");
		printk("Handle=0x%X\n",
		le16_to_cpu(phy_data->AttachedDeviceHandle));
		printk("Controller Handle=0x%X\n",
		le16_to_cpu(phy_data->ControllerDevHandle));
		printk("Port=0x%X\n", phy_data->Port);
		printk("Port Flags=0x%X\n", phy_data->PortFlags);
		printk("PHY Flags=0x%X\n", phy_data->PhyFlags);
		printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate);
		printk("Controller PHY Device Info=0x%X\n",
		le32_to_cpu(phy_data->ControllerPhyDeviceInfo));
		printk("DiscoveryStatus=0x%X\n",
		le32_to_cpu(phy_data->DiscoveryStatus));
		printk("\n");
		struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
		return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
		}

		static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0)
		static int mptsas_get_linkerrors(struct sas_phy *phy)
		{
		__le64 sas_address;
		MPT_ADAPTER *ioc = phy_to_ioc(phy);
		ConfigExtendedPageHeader_t hdr;
		CONFIGPARMS cfg;
		SasPhyPage1_t *buffer;
		dma_addr_t dma_handle;
		int error;

		memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
		hdr.PageVersion = MPI_SASPHY1_PAGEVERSION;
		hdr.ExtPageLength = 0;
		hdr.PageNumber = 1 /* page number 1*/;
		hdr.Reserved1 = 0;
		hdr.Reserved2 = 0;
		hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
		hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;

		printk("---- SAS PHY PAGE 0 ------------\n");
		printk("Attached Device Handle=0x%X\n",
		le16_to_cpu(pg0->AttachedDevHandle));
		printk("SAS Address=0x%llX\n",
		(unsigned long long)le64_to_cpu(sas_address));
		printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier);
		printk("Attached Device Info=0x%X\n",
		le32_to_cpu(pg0->AttachedDeviceInfo));
		printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate);
		printk("Change Count=0x%X\n", pg0->ChangeCount);
		printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo));
		printk("\n");
		cfg.cfghdr.ehdr = &hdr;
		cfg.physAddr = -1;
		cfg.pageAddr = phy->identify.phy_identifier;
		cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
		cfg.dir = 0; /* read */
		cfg.timeout = 10;

		error = mpt_config(ioc, &cfg);
		if (error)
		return error;
		if (!hdr.ExtPageLength)
		return -ENXIO;

		buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
		&dma_handle);
		if (!buffer)
		return -ENOMEM;

		cfg.physAddr = dma_handle;
		cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;

		error = mpt_config(ioc, &cfg);
		if (error)
		goto out_free_consistent;

		mptsas_print_phy_pg1(buffer);

		phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount);
		phy->running_disparity_error_count =
		le32_to_cpu(buffer->RunningDisparityErrorCount);
		phy->loss_of_dword_sync_count =
		le32_to_cpu(buffer->LossDwordSynchCount);
		phy->phy_reset_problem_count =
		le32_to_cpu(buffer->PhyResetProblemCount);

		out_free_consistent:
		pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
		buffer, dma_handle);
		return error;
		}

		static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
		static int mptsas_mgmt_done(MPT_ADAPTER ioc, MPT_FRAME_HDR req,
		MPT_FRAME_HDR *reply)
		{
		__le64 sas_address;
		ioc->sas_mgmt.status \|= MPT_SAS_MGMT_STATUS_COMMAND_GOOD;
		if (reply != NULL) {
		ioc->sas_mgmt.status \|= MPT_SAS_MGMT_STATUS_RF_VALID;
		memcpy(ioc->sas_mgmt.reply, reply,
		min(ioc->reply_sz, 4 * reply->u.reply.MsgLength));
		}
		complete(&ioc->sas_mgmt.done);
		return 1;
		}

		memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
		static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
		{
		MPT_ADAPTER *ioc = phy_to_ioc(phy);
		SasIoUnitControlRequest_t *req;
		SasIoUnitControlReply_t *reply;
		MPT_FRAME_HDR *mf;
		MPIHeader_t *hdr;
		unsigned long timeleft;
		int error = -ERESTARTSYS;

		/* not implemented for expanders */
		if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP)
		return -ENXIO;

		if (down_interruptible(&ioc->sas_mgmt.mutex))
		goto out;

		printk("---- SAS DEVICE PAGE 0 ---------\n");
		printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle));
		printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
		printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
		printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
		printk("Target ID=0x%X\n", pg0->TargetID);
		printk("Bus=0x%X\n", pg0->Bus);
		printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
		printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
		printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
		printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
		printk("Physical Port=0x%X\n", pg0->PhysicalPort);
		printk("\n");
		mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc);
		if (!mf) {
		error = -ENOMEM;
		goto out_unlock;
		}

		static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
		{
		printk("---- SAS EXPANDER PAGE 1 ------------\n");
		hdr = (MPIHeader_t *) mf;
		req = (SasIoUnitControlRequest_t *)mf;
		memset(req, 0, sizeof(SasIoUnitControlRequest_t));
		req->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
		req->MsgContext = hdr->MsgContext;
		req->Operation = hard_reset ?
		MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET;
		req->PhyNum = phy->identify.phy_identifier;

		printk("Physical Port=0x%X\n", pg1->PhysicalPort);
		printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
		printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
		printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
		printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
		printk("Owner Device Handle=0x%X\n",
		le16_to_cpu(pg1->OwnerDevHandle));
		printk("Attached Device Handle=0x%X\n",
		le16_to_cpu(pg1->AttachedDevHandle));
		mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);

		timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done,
		10 * HZ);
		if (!timeleft) {
		/* On timeout reset the board */
		mpt_free_msg_frame(ioc, mf);
		mpt_HardResetHandler(ioc, CAN_SLEEP);
		error = -ETIMEDOUT;
		goto out_unlock;
		}
		#else
		#define mptsas_print_phy_data(phy_data) do { } while (0)
		#define mptsas_print_phy_pg0(pg0) do { } while (0)
		#define mptsas_print_device_pg0(pg0) do { } while (0)
		#define mptsas_print_expander_pg1(pg1) do { } while (0)
		#endif

		/* a reply frame is expected */
		if ((ioc->sas_mgmt.status &
		MPT_IOCTL_STATUS_RF_VALID) == 0) {
		error = -ENXIO;
		goto out_unlock;
		}

		/* process the completed Reply Message Frame */
		reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply;
		if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) {
		printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
		__FUNCTION__,
		reply->IOCStatus,
		reply->IOCLogInfo);
		error = -ENXIO;
		goto out_unlock;
		}

		error = 0;

		out_unlock:
		up(&ioc->sas_mgmt.mutex);
		out:
		return error;
		}

		static struct sas_function_template mptsas_transport_functions = {
		.get_linkerrors = mptsas_get_linkerrors,
		.phy_reset = mptsas_phy_reset,
		};

		static struct scsi_transport_template *mptsas_transport_template;

		static int
		mptsas_sas_io_unit_pg0(MPT_ADAPTER ioc, struct mptsas_portinfo port_info)
		@@ -680,7 +847,7 @@ mptsas_parse_device_info(struct sas_identify *identify,
		}

		static int mptsas_probe_one_phy(struct device *dev,
		struct mptsas_phyinfo *phy_info, int index)
		struct mptsas_phyinfo *phy_info, int index, int local)
		{
		struct sas_phy *port;
		int error;
		@@ -773,6 +940,9 @@ static int mptsas_probe_one_phy(struct device *dev,
		break;
		}

		if (local)
		port->local_attached = 1;

		error = sas_phy_add(port);
		if (error) {
		sas_phy_free(port);
		@@ -838,7 +1008,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER ioc, int index)
		}

		mptsas_probe_one_phy(&ioc->sh->shost_gendev,
		&port_info->phy_info[i], *index);
		&port_info->phy_info[i], *index, 1);
		(*index)++;
		}

		@@ -909,7 +1079,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER ioc, u32 handle, int *index)
		}
		}

		mptsas_probe_one_phy(parent, &port_info->phy_info[i], *index);
		mptsas_probe_one_phy(parent, &port_info->phy_info[i],
		*index, 0);
		(*index)++;
		}

		@@ -1021,6 +1192,8 @@ mptsas_probe(struct pci_dev pdev, const struct pci_device_id id)
		sh->unique_id = ioc->id;

		INIT_LIST_HEAD(&ioc->sas_topology);
		init_MUTEX(&ioc->sas_mgmt.mutex);
		init_completion(&ioc->sas_mgmt.done);

		/* Verify that we won't exceed the maximum
		* number of chain buffers
		@@ -1207,6 +1380,7 @@ mptsas_init(void)
		mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER);
		mptsasInternalCtx =
		mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
		mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);

		if (mpt_event_register(mptsasDoneCtx, mptscsih_event_process) == 0) {
		devtprintk((KERN_INFO MYNAM
		@@ -1230,6 +1404,7 @@ mptsas_exit(void)
		mpt_reset_deregister(mptsasDoneCtx);
		mpt_event_deregister(mptsasDoneCtx);

		mpt_deregister(mptsasMgmtCtx);
		mpt_deregister(mptsasInternalCtx);
		mpt_deregister(mptsasTaskCtx);
		mpt_deregister(mptsasDoneCtx);

drivers/scsi/3w-9xxx.c

+3 −1

Original line number	Diff line number	Diff line
		@@ -1732,7 +1732,9 @@ static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)

		tw_dev->num_resets++;

		printk(KERN_WARNING "3w-9xxx: scsi%d: WARNING: (0x%02X:0x%04X): Unit #%d: Command (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, TW_DRIVER, 0x2c, SCpnt->device->id, SCpnt->cmnd[0]);
		sdev_printk(KERN_WARNING, SCpnt->device,
		"WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
		TW_DRIVER, 0x2c, SCpnt->cmnd[0]);

		/* Now reset the card and some of the device extension data */
		if (twa_reset_device_extension(tw_dev, 0)) {

drivers/scsi/3w-xxxx.c

+3 −1

Original line number	Diff line number	Diff line
		@@ -1432,7 +1432,9 @@ static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt)

		tw_dev->num_resets++;

		printk(KERN_WARNING "3w-xxxx: scsi%d: WARNING: Unit #%d: Command (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, SCpnt->device->id, SCpnt->cmnd[0]);
		sdev_printk(KERN_WARNING, SCpnt->device,
		"WARNING: Command (0x%x) timed out, resetting card.\n",
		SCpnt->cmnd[0]);

		/* Now reset the card and some of the device extension data */
		if (tw_reset_device_extension(tw_dev, 0)) {