Merge airlied/drm-next into drm-misc-next (83fd26c3) · Commits · e / devices / android_kernel_fairphone_FP5

.gitignore

+4 −0

Original line number	Diff line number	Diff line
		@@ -127,3 +127,7 @@ all.config

		# Kdevelop4
		*.kdev4

		#Automatically generated by ASN.1 compiler
		net/ipv4/netfilter/nf_nat_snmp_basic-asn1.c
		net/ipv4/netfilter/nf_nat_snmp_basic-asn1.h

Documentation/ABI/testing/sysfs-ata

+100 −71

Original line number	Diff line number	Diff line
		What: /sys/class/ata_...
		Date: August 2008
		Contact: Gwendal Grignou<gwendal@google.com>
		Description:

		Provide a place in sysfs for storing the ATA topology of the system. This allows
		retrieving various information about ATA objects.
		Provide a place in sysfs for storing the ATA topology of the
		system. This allows retrieving various information about ATA
		objects.

		Files under /sys/class/ata_port
		-------------------------------

		For each port, a directory ataX is created where X is the ata_port_id of
		the port. The device parent is the ata host device.
		For each port, a directory ataX is created where X is the ata_port_id of the
		port. The device parent is the ata host device.


		idle_irq (read)
		What: /sys/class/ata_port/ataX/nr_pmp_links
		What: /sys/class/ata_port/ataX/idle_irq
		Date: May, 2010
		KernelVersion: v2.6.37
		Contact: Gwendal Grignou <gwendal@chromium.org>
		Description:
		nr_pmp_links: (RO) If a SATA Port Multiplier (PM) is
		connected, the number of links behind it.

		Number of IRQ received by the port while idle [some ata HBA only].
		idle_irq: (RO) Number of IRQ received by the port while
		idle [some ata HBA only].

		nr_pmp_links (read)

		If a SATA Port Multiplier (PM) is connected, number of link behind it.
		What: /sys/class/ata_port/ataX/port_no
		Date: May, 2013
		KernelVersion: v3.11
		Contact: Gwendal Grignou <gwendal@chromium.org>
		Description:
		(RO) Host local port number. While registering host controller,
		port numbers are tracked based upon number of ports available on
		the controller. This attribute is needed by udev for composing
		persistent links in /dev/disk/by-path.

		Files under /sys/class/ata_link
		-------------------------------

		Behind each port, there is a ata_link. If there is a SATA PM in the
		topology, 15 ata_link objects are created.
		Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15
		ata_link objects are created.

		If a link is behind a port, the directory name is linkX, where X is
		ata_port_id of the port.
		If a link is behind a PM, its name is linkX.Y where X is ata_port_id
		of the parent port and Y the PM port.
		If a link is behind a port, the directory name is linkX, where X is ata_port_id
		of the port. If a link is behind a PM, its name is linkX.Y where X is
		ata_port_id of the parent port and Y the PM port.

		hw_sata_spd_limit

		Maximum speed supported by the connected SATA device.

		sata_spd_limit
		What: /sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit
		What: /sys/class/ata_link/linkX[.Y]/sata_spd_limit
		What: /sys/class/ata_link/linkX[.Y]/sata_spd
		Date: May, 2010
		KernelVersion: v2.6.37
		Contact: Gwendal Grignou <gwendal@chromium.org>
		Description:
		hw_sata_spd_limit: (RO) Maximum speed supported by the
		connected SATA device.

		Maximum speed imposed by libata.
		sata_spd_limit: (RO) Maximum speed imposed by libata.

		sata_spd
		sata_spd: (RO) Current speed of the link
		eg. 1.5, 3 Gbps etc.

		Current speed of the link [1.5, 3Gps,...].

		Files under /sys/class/ata_device
		---------------------------------

		Behind each link, up to two ata device are created.
		Behind each link, up to two ata devices are created.
		The name of the directory is devX[.Y].Z where:
		- X is ata_port_id of the port where the device is connected,
		- Y the port of the PM if any, and
		- Z the device id: for PATA, there is usually 2 devices [0,1],
		only 1 for SATA.

		class
		Device class. Can be "ata" for disk, "atapi" for packet device,
		"pmp" for PM, or "none" if no device was found behind the link.

		dma_mode

		Transfer modes supported by the device when in DMA mode.
		Mostly used by PATA device.

		pio_mode

		Transfer modes supported by the device when in PIO mode.
		Mostly used by PATA device.

		xfer_mode

		Current transfer mode.

		id

		Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
		Only valid if the device is not a PM.
		- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA.


		What: /sys/class/ata_device/devX[.Y].Z/spdn_cnt
		What: /sys/class/ata_device/devX[.Y].Z/gscr
		What: /sys/class/ata_device/devX[.Y].Z/ering
		What: /sys/class/ata_device/devX[.Y].Z/id
		What: /sys/class/ata_device/devX[.Y].Z/pio_mode
		What: /sys/class/ata_device/devX[.Y].Z/xfer_mode
		What: /sys/class/ata_device/devX[.Y].Z/dma_mode
		What: /sys/class/ata_device/devX[.Y].Z/class
		Date: May, 2010
		KernelVersion: v2.6.37
		Contact: Gwendal Grignou <gwendal@chromium.org>
		Description:
		spdn_cnt: (RO) Number of times libata decided to lower the
		speed of link due to errors.

		gscr
		gscr: (RO) Cached result of the dump of PM GSCR
		register. Valid registers are:

		Cached result of the dump of PM GSCR register.
		Valid registers are:
		0: SATA_PMP_GSCR_PROD_ID,
		1: SATA_PMP_GSCR_REV,
		2: SATA_PMP_GSCR_PORT_INFO,
		@@ -88,23 +97,43 @@ gscr
		64: SATA_PMP_GSCR_FEAT,
		96: SATA_PMP_GSCR_FEAT_EN,
		130: SATA_PMP_GSCR_SII_GPIO

		Only valid if the device is a PM.

		trim
		ering: (RO) Formatted output of the error ring of the
		device.

		id: (RO) Cached result of IDENTIFY command, as
		described in ATA8 7.16 and 7.17. Only valid if
		the device is not a PM.

		pio_mode: (RO) Transfer modes supported by the device when
		in PIO mode. Mostly used by PATA device.

		xfer_mode: (RO) Current transfer mode

		Shows the DSM TRIM mode currently used by the device. Valid
		dma_mode: (RO) Transfer modes supported by the device when
		in DMA mode. Mostly used by PATA device.

		class: (RO) Device class. Can be "ata" for disk,
		"atapi" for packet device, "pmp" for PM, or
		"none" if no device was found behind the link.


		What: /sys/class/ata_device/devX[.Y].Z/trim
		Date: May, 2015
		KernelVersion: v4.10
		Contact: Gwendal Grignou <gwendal@chromium.org>
		Description:
		(RO) Shows the DSM TRIM mode currently used by the device. Valid
		values are:
		unsupported: Drive does not support DSM TRIM
		unqueued: Drive supports unqueued DSM TRIM only
		queued: Drive supports queued DSM TRIM
		forced_unqueued: Drive's queued DSM support is known to be
		buggy and only unqueued TRIM commands
		are sent

		spdn_cnt
		unsupported: Drive does not support DSM TRIM

		Number of time libata decided to lower the speed of link due to errors.
		unqueued: Drive supports unqueued DSM TRIM only

		ering
		queued: Drive supports queued DSM TRIM

		Formatted output of the error ring of the device.
		forced_unqueued: Drive's queued DSM support is known to
		be buggy and only unqueued TRIM commands
		are sent

Documentation/ABI/testing/sysfs-block-device

0 → 100644

+58 −0

Original line number	Diff line number	Diff line
		What: /sys/block/*/device/sw_activity
		Date: Jun, 2008
		KernelVersion: v2.6.27
		Contact: linux-ide@vger.kernel.org
		Description:
		(RW) Used by drivers which support software controlled activity
		LEDs.

		It has the following valid values:

		0 OFF - the LED is not activated on activity
		1 BLINK_ON - the LED blinks on every 10ms when activity is
		detected.
		2 BLINK_OFF - the LED is on when idle, and blinks off
		every 10ms when activity is detected.

		Note that the user must turn sw_activity OFF it they wish to
		control the activity LED via the em_message file.


		What: /sys/block/*/device/unload_heads
		Date: Sep, 2008
		KernelVersion: v2.6.28
		Contact: linux-ide@vger.kernel.org
		Description:
		(RW) Hard disk shock protection

		Writing an integer value to this file will take the heads of the
		respective drive off the platter and block all I/O operations
		for the specified number of milliseconds.

		- If the device does not support the unload heads feature,
		access is denied with -EOPNOTSUPP.
		- The maximal value accepted for a timeout is 30000
		milliseconds.
		- A previously set timeout can be cancelled and disk can resume
		normal operation immediately by specifying a timeout of 0.
		- Some hard drives only comply with an earlier version of the
		ATA standard, but support the unload feature nonetheless.
		There is no safe way Linux can detect these devices, so this
		is not enabled by default. If it is known that your device
		does support the unload feature, then you can tell the kernel
		to enable it by writing -1. It can be disabled again by
		writing -2.
		- Values below -2 are rejected with -EINVAL

		For more information, see
		Documentation/laptops/disk-shock-protection.txt


		What: /sys/block/*/device/ncq_prio_enable
		Date: Oct, 2016
		KernelVersion: v4.10
		Contact: linux-ide@vger.kernel.org
		Description:
		(RW) Write to the file to turn on or off the SATA ncq (native
		command queueing) support. By default this feature is turned
		off.

Documentation/ABI/testing/sysfs-class-scsi_host

+89 −0

Original line number	Diff line number	Diff line
		@@ -27,3 +27,92 @@ Description: This file contains the current status of the "SSD Smart Path"
		the direct i/o path to physical devices. This setting is
		controller wide, affecting all configured logical drives on the
		controller. This file is readable and writable.

		What: /sys/class/scsi_host/hostX/link_power_management_policy
		Date: Oct, 2007
		KernelVersion: v2.6.24
		Contact: linux-ide@vger.kernel.org
		Description:
		(RW) This parameter allows the user to read and set the link
		(interface) power management.

		There are four possible options:

		min_power: Tell the controller to try to make the link use the
		least possible power when possible. This may sacrifice some
		performance due to increased latency when coming out of lower
		power states.

		max_performance: Generally, this means no power management.
		Tell the controller to have performance be a priority over power
		management.

		medium_power: Tell the controller to enter a lower power state
		when possible, but do not enter the lowest power state, thus
		improving latency over min_power setting.

		med_power_with_dipm: Identical to the existing medium_power
		setting except that it enables dipm (device initiated power
		management) on top, which makes it match the Windows IRST (Intel
		Rapid Storage Technology) driver settings. This setting is also
		close to min_power, except that:
		a) It does not use host-initiated slumber mode, but it does
		allow device-initiated slumber
		b) It does not enable low power device sleep mode (DevSlp).

		What: /sys/class/scsi_host/hostX/em_message
		What: /sys/class/scsi_host/hostX/em_message_type
		Date: Jun, 2008
		KernelVersion: v2.6.27
		Contact: linux-ide@vger.kernel.org
		Description:
		em_message: (RW) Enclosure management support. For the LED
		protocol, writes and reads correspond to the LED message format
		as defined in the AHCI spec.

		The user must turn sw_activity (under /sys/block/*/device/) OFF
		it they wish to control the activity LED via the em_message
		file.

		em_message_type: (RO) Displays the current enclosure management
		protocol that is being used by the driver (for eg. LED, SAF-TE,
		SES-2, SGPIO etc).

		What: /sys/class/scsi_host/hostX/ahci_port_cmd
		What: /sys/class/scsi_host/hostX/ahci_host_caps
		What: /sys/class/scsi_host/hostX/ahci_host_cap2
		Date: Mar, 2010
		KernelVersion: v2.6.35
		Contact: linux-ide@vger.kernel.org
		Description:
		[to be documented]

		What: /sys/class/scsi_host/hostX/ahci_host_version
		Date: Mar, 2010
		KernelVersion: v2.6.35
		Contact: linux-ide@vger.kernel.org
		Description:
		(RO) Display the version of the AHCI spec implemented by the
		host.

		What: /sys/class/scsi_host/hostX/em_buffer
		Date: Apr, 2010
		KernelVersion: v2.6.35
		Contact: linux-ide@vger.kernel.org
		Description:
		(RW) Allows access to AHCI EM (enclosure management) buffer
		directly if the host supports EM.

		For eg. the AHCI driver supports SGPIO EM messages but the
		SATA/AHCI specs do not define the SGPIO message format of the EM
		buffer. Different hardware(HW) vendors may have different
		definitions. With the em_buffer attribute, this issue can be
		solved by allowing HW vendors to provide userland drivers and
		tools for their SGPIO initiators.

		What: /sys/class/scsi_host/hostX/em_message_supported
		Date: Oct, 2009
		KernelVersion: v2.6.39
		Contact: linux-ide@vger.kernel.org
		Description:
		(RO) Displays supported enclosure management message types.

Documentation/ABI/testing/sysfs-devices-platform-dock

0 → 100644

+39 −0

Original line number	Diff line number	Diff line
		What: /sys/devices/platform/dock.N/docked
		Date: Dec, 2006
		KernelVersion: 2.6.19
		Contact: linux-acpi@vger.kernel.org
		Description:
		(RO) Value 1 or 0 indicates whether the software believes the
		laptop is docked in a docking station.

		What: /sys/devices/platform/dock.N/undock
		Date: Dec, 2006
		KernelVersion: 2.6.19
		Contact: linux-acpi@vger.kernel.org
		Description:
		(WO) Writing to this file causes the software to initiate an
		undock request to the firmware.

		What: /sys/devices/platform/dock.N/uid
		Date: Feb, 2007
		KernelVersion: v2.6.21
		Contact: linux-acpi@vger.kernel.org
		Description:
		(RO) Displays the docking station the laptop is docked to.

		What: /sys/devices/platform/dock.N/flags
		Date: May, 2007
		KernelVersion: v2.6.21
		Contact: linux-acpi@vger.kernel.org
		Description:
		(RO) Show dock station flags, useful for checking if undock
		request has been made by the user (from the immediate_undock
		option).

		What: /sys/devices/platform/dock.N/type
		Date: Aug, 2008
		KernelVersion: v2.6.27
		Contact: linux-acpi@vger.kernel.org
		Description:
		(RO) Display the dock station type- dock_station, ata_bay or
		battery_bay.