Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 809b53c4 authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by Bartlomiej Zolnierkiewicz
Browse files

hpt366: fix HPT37x PIO mode timings (take 2) 



After looking into the HPT370 manual (now that I have it) and re-checking all
the timing tables, here's what I have discovered:

- at 33 MHz clock, PIO mode 0 timings turned to be overclocked, and all other
  PIO modes underclocked;

- at 50 MHz clock, PIO modes 0 to 2 turned to be overclocked;

- at 66 MHz clock, PIO mode 0 was overclocked too.

Finally, the taskfile timing (matching PIO mode 0) turned to be overclocked at
all clock frequencies (and in all manuals)...

The new timings have been tested on HPT370 chip (at 33 MHz PCI clock) and on
HPT371N chip (at both 50 and 66 MHz DPLL clock).

Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent eadb6ecf

drivers/ide/pci/hpt366.c

+70 −1
Original line number Diff line number Diff line 
/*

 * linux/drivers/ide/pci/hpt366.c		Version 1.21	Oct 23, 2007

 * linux/drivers/ide/pci/hpt366.c		Version 1.22	Dec 4, 2007

 *

 * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>

 * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
@@ -310,6 +310,8 @@ static u32 twenty_five_base_hpt36x[] = { 
	/* XFER_PIO_0 */	0xc0d08585

};



#if 0

/* These are the timing tables from the HighPoint open source drivers... */

static u32 thirty_three_base_hpt37x[] = {

	/* XFER_UDMA_6 */	0x12446231,	/* 0x12646231 ?? */

	/* XFER_UDMA_5 */	0x12446231,
@@ -369,6 +371,73 @@ static u32 sixty_six_base_hpt37x[] = { 
	/* XFER_PIO_1 */	0x0d029d26,

	/* XFER_PIO_0 */	0x0d029d5e

};

#else

/*

 * The following are the new timing tables with PIO mode data/taskfile transfer

 * overclocking fixed...

 */



/* This table is taken from the HPT370 data manual rev. 1.02 */

static u32 thirty_three_base_hpt37x[] = {

	/* XFER_UDMA_6 */	0x16455031,	/* 0x16655031 ?? */

	/* XFER_UDMA_5 */	0x16455031,

	/* XFER_UDMA_4 */	0x16455031,

	/* XFER_UDMA_3 */	0x166d5031,

	/* XFER_UDMA_2 */	0x16495031,

	/* XFER_UDMA_1 */	0x164d5033,

	/* XFER_UDMA_0 */	0x16515097,



	/* XFER_MW_DMA_2 */	0x26515031,

	/* XFER_MW_DMA_1 */	0x26515033,

	/* XFER_MW_DMA_0 */	0x26515097,



	/* XFER_PIO_4 */	0x06515021,

	/* XFER_PIO_3 */	0x06515022,

	/* XFER_PIO_2 */	0x06515033,

	/* XFER_PIO_1 */	0x06915065,

	/* XFER_PIO_0 */	0x06d1508a

};



static u32 fifty_base_hpt37x[] = {

	/* XFER_UDMA_6 */	0x1a861842,

	/* XFER_UDMA_5 */	0x1a861842,

	/* XFER_UDMA_4 */	0x1aae1842,

	/* XFER_UDMA_3 */	0x1a8e1842,

	/* XFER_UDMA_2 */	0x1a0e1842,

	/* XFER_UDMA_1 */	0x1a161854,

	/* XFER_UDMA_0 */	0x1a1a18ea,



	/* XFER_MW_DMA_2 */	0x2a821842,

	/* XFER_MW_DMA_1 */	0x2a821854,

	/* XFER_MW_DMA_0 */	0x2a8218ea,



	/* XFER_PIO_4 */	0x0a821842,

	/* XFER_PIO_3 */	0x0a821843,

	/* XFER_PIO_2 */	0x0a821855,

	/* XFER_PIO_1 */	0x0ac218a8,

	/* XFER_PIO_0 */	0x0b02190c

};



static u32 sixty_six_base_hpt37x[] = {

	/* XFER_UDMA_6 */	0x1c86fe62,

	/* XFER_UDMA_5 */	0x1caefe62,	/* 0x1c8afe62 */

	/* XFER_UDMA_4 */	0x1c8afe62,

	/* XFER_UDMA_3 */	0x1c8efe62,

	/* XFER_UDMA_2 */	0x1c92fe62,

	/* XFER_UDMA_1 */	0x1c9afe62,

	/* XFER_UDMA_0 */	0x1c82fe62,



	/* XFER_MW_DMA_2 */	0x2c82fe62,

	/* XFER_MW_DMA_1 */	0x2c82fe66,

	/* XFER_MW_DMA_0 */	0x2c82ff2e,



	/* XFER_PIO_4 */	0x0c82fe62,

	/* XFER_PIO_3 */	0x0c82fe84,

	/* XFER_PIO_2 */	0x0c82fea6,

	/* XFER_PIO_1 */	0x0d02ff26,

	/* XFER_PIO_0 */	0x0d42ff7f

};

#endif



#define HPT366_DEBUG_DRIVE_INFO		0

#define HPT371_ALLOW_ATA133_6		1