Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7aacf86b authored by Nathan Sullivan's avatar Nathan Sullivan Committed by Ralf Baechle
Browse files

MIPS: NI 169445 board support



Support the National Instruments 169445 board.

Signed-off-by: default avatarNathan Sullivan <nathan.sullivan@ni.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16782/


Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 0c4037b9
Loading
Loading
Loading
Loading
+7 −0
Original line number Diff line number Diff line
National Instruments MIPS platforms

required root node properties:
	- compatible: must be "ni,169445"

CPU Nodes
	- compatible: must be "mti,mips14KEc"
+1 −0
Original line number Diff line number Diff line
@@ -5,6 +5,7 @@ dts-dirs += ingenic
dts-dirs	+= lantiq
dts-dirs	+= mti
dts-dirs	+= netlogic
dts-dirs	+= ni
dts-dirs	+= pic32
dts-dirs	+= qca
dts-dirs	+= ralink
+100 −0
Original line number Diff line number Diff line
/dts-v1/;

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "ni,169445";

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		cpu@0 {
			device_type = "cpu";
			compatible = "mti,mips14KEc";
			clocks = <&baseclk>;
			reg = <0>;
		};
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x10000000>;
	};

	baseclk: baseclock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <50000000>;
	};

	cpu_intc: interrupt-controller {
		#address-cells = <0>;
		compatible = "mti,cpu-interrupt-controller";
		interrupt-controller;
		#interrupt-cells = <1>;
	};

	ahb@1f300000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x1f300000 0x80FFF>;

		gpio1: gpio@10 {
			compatible = "ni,169445-nand-gpio";
			reg = <0x10 0x4>;
			reg-names = "dat";
			gpio-controller;
			#gpio-cells = <2>;
		};

		gpio2: gpio@14 {
			compatible = "ni,169445-nand-gpio";
			reg = <0x14 0x4>;
			reg-names = "dat";
			gpio-controller;
			#gpio-cells = <2>;
			no-output;
		};

		nand@0 {
			compatible = "gpio-control-nand";
			nand-on-flash-bbt;
			nand-ecc-mode = "soft_bch";
			nand-ecc-step-size = <512>;
			nand-ecc-strength = <4>;
			reg = <0x0 4>;
			gpios = <&gpio2 0 0>, /* rdy */
				<&gpio1 1 0>, /* nce */
				<&gpio1 2 0>, /* ale */
				<&gpio1 3 0>, /* cle */
				<&gpio1 4 0>; /* nwp */
		};

		serial@80000 {
			compatible = "ns16550a";
			reg = <0x80000 0x1000>;
			interrupt-parent = <&cpu_intc>;
			interrupts = <6>;
			clocks = <&baseclk>;
			reg-shift = <0>;
		};

		ethernet@40000 {
			compatible = "snps,dwmac-4.10a";
			interrupt-parent = <&cpu_intc>;
			interrupts = <5>;
			interrupt-names = "macirq";
			reg = <0x40000 0x2000>;
			clock-names = "stmmaceth", "pclk";
			clocks = <&baseclk>, <&baseclk>;

			phy-mode = "rgmii";

			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};
	};
};
+7 −0
Original line number Diff line number Diff line
dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= 169445.dtb

# Force kbuild to make empty built-in.o if necessary
obj-					+= dummy.o

always					:= $(dtb-y)
clean-files				:= *.dtb *.dtb.S
+27 −0
Original line number Diff line number Diff line
CONFIG_FIT_IMAGE_FDT_NI169445=y

CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y

CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y

CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CMDLINE_PARTS=y

CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_IDS=y

CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BLOCK=y

CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_DWMAC_GENERIC=y
Loading