Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 782d25ca authored by Deepak M's avatar Deepak M Committed by Jani Nikula
Browse files

drm/i915/bxt: Additional MIPI clock divider form B0 stepping onwards 



The MIPI clock calculations for the addtional clock
are revised from B0 stepping onwards, the bit definitions
have changed compared to old stepping.

v2: Fixing compilation warning.
v3: Retained the old Macros (Jani)

Signed-off-by: default avatarDeepak M <m.deepak@intel.com>
Tested-by: Ramalingam C <ramalingam.c@intel.com> # BXT-T with Tianma panel
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455556437-29267-1-git-send-email-m.deepak@intel.com
parent e3bddded

drivers/gpu/drm/i915/i915_reg.h

+50 −46
Original line number Diff line number Diff line
@@ -7669,58 +7669,62 @@ enum skl_disp_power_wells { 
#define  BXT_MIPI_DIV_SHIFT(port)		\

			_MIPI_PORT(port, BXT_MIPI1_DIV_SHIFT, \

					BXT_MIPI2_DIV_SHIFT)

/* Var clock divider to generate TX source. Result must be < 39.5 M */

#define  BXT_MIPI1_ESCLK_VAR_DIV_MASK		(0x3F << 26)

#define  BXT_MIPI2_ESCLK_VAR_DIV_MASK		(0x3F << 10)

#define  BXT_MIPI_ESCLK_VAR_DIV_MASK(port)	\

			_MIPI_PORT(port, BXT_MIPI1_ESCLK_VAR_DIV_MASK, \

						BXT_MIPI2_ESCLK_VAR_DIV_MASK)



#define  BXT_MIPI_ESCLK_VAR_DIV(port, val)	\

			(val << BXT_MIPI_DIV_SHIFT(port))



/* TX control divider to select actual TX clock output from (8x/var) */

#define  BXT_MIPI1_TX_ESCLK_SHIFT		21

#define  BXT_MIPI2_TX_ESCLK_SHIFT		5

#define  BXT_MIPI1_TX_ESCLK_SHIFT		26

#define  BXT_MIPI2_TX_ESCLK_SHIFT		10

#define  BXT_MIPI_TX_ESCLK_SHIFT(port)		\

			_MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_SHIFT, \

					BXT_MIPI2_TX_ESCLK_SHIFT)

#define  BXT_MIPI1_TX_ESCLK_FIXDIV_MASK		(3 << 21)

#define  BXT_MIPI2_TX_ESCLK_FIXDIV_MASK		(3 << 5)

#define  BXT_MIPI1_TX_ESCLK_FIXDIV_MASK		(0x3F << 26)

#define  BXT_MIPI2_TX_ESCLK_FIXDIV_MASK		(0x3F << 10)

#define  BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)	\

			_MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_FIXDIV_MASK, \

					BXT_MIPI2_TX_ESCLK_FIXDIV_MASK)

#define  BXT_MIPI_TX_ESCLK_8XDIV_BY2(port)	\

		(0x0 << BXT_MIPI_TX_ESCLK_SHIFT(port))

#define  BXT_MIPI_TX_ESCLK_8XDIV_BY4(port)	\

		(0x1 << BXT_MIPI_TX_ESCLK_SHIFT(port))

#define  BXT_MIPI_TX_ESCLK_8XDIV_BY8(port)	\

		(0x2 << BXT_MIPI_TX_ESCLK_SHIFT(port))

/* RX control divider to select actual RX clock output from 8x*/

#define  BXT_MIPI1_RX_ESCLK_SHIFT		19

#define  BXT_MIPI2_RX_ESCLK_SHIFT		3

#define  BXT_MIPI_RX_ESCLK_SHIFT(port)		\

			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_SHIFT, \

					BXT_MIPI2_RX_ESCLK_SHIFT)

#define  BXT_MIPI1_RX_ESCLK_FIXDIV_MASK		(3 << 19)

#define  BXT_MIPI2_RX_ESCLK_FIXDIV_MASK		(3 << 3)

#define  BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port)	\

		(3 << BXT_MIPI_RX_ESCLK_SHIFT(port))

#define  BXT_MIPI_RX_ESCLK_8X_BY2(port)	\

		(1 << BXT_MIPI_RX_ESCLK_SHIFT(port))

#define  BXT_MIPI_RX_ESCLK_8X_BY3(port)	\

		(2 << BXT_MIPI_RX_ESCLK_SHIFT(port))

#define  BXT_MIPI_RX_ESCLK_8X_BY4(port)	\

		(3 << BXT_MIPI_RX_ESCLK_SHIFT(port))

/* BXT-A WA: Always prog DPHY dividers to 00 */

#define  BXT_MIPI1_DPHY_DIV_SHIFT		16

#define  BXT_MIPI2_DPHY_DIV_SHIFT		0

#define  BXT_MIPI_DPHY_DIV_SHIFT(port)		\

			_MIPI_PORT(port, BXT_MIPI1_DPHY_DIV_SHIFT, \

					BXT_MIPI2_DPHY_DIV_SHIFT)

#define  BXT_MIPI_1_DPHY_DIVIDER_MASK		(3 << 16)

#define  BXT_MIPI_2_DPHY_DIVIDER_MASK		(3 << 0)

#define  BXT_MIPI_DPHY_DIVIDER_MASK(port)	\

		(3 << BXT_MIPI_DPHY_DIV_SHIFT(port))

#define  BXT_MIPI_TX_ESCLK_DIVIDER(port, val)	\

		((val & 0x3F) << BXT_MIPI_TX_ESCLK_SHIFT(port))

/* RX upper control divider to select actual RX clock output from 8x */

#define  BXT_MIPI1_RX_ESCLK_UPPER_SHIFT		21

#define  BXT_MIPI2_RX_ESCLK_UPPER_SHIFT		5

#define  BXT_MIPI_RX_ESCLK_UPPER_SHIFT(port)		\

			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_UPPER_SHIFT, \

					BXT_MIPI2_RX_ESCLK_UPPER_SHIFT)

#define  BXT_MIPI1_RX_ESCLK_UPPER_FIXDIV_MASK		(3 << 21)

#define  BXT_MIPI2_RX_ESCLK_UPPER_FIXDIV_MASK		(3 << 5)

#define  BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port)	\

			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_UPPER_FIXDIV_MASK, \

					BXT_MIPI2_RX_ESCLK_UPPER_FIXDIV_MASK)

#define  BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, val)	\

		((val & 3) << BXT_MIPI_RX_ESCLK_UPPER_SHIFT(port))

/* 8/3X divider to select the actual 8/3X clock output from 8x */

#define  BXT_MIPI1_8X_BY3_SHIFT                19

#define  BXT_MIPI2_8X_BY3_SHIFT                3

#define  BXT_MIPI_8X_BY3_SHIFT(port)          \

			_MIPI_PORT(port, BXT_MIPI1_8X_BY3_SHIFT, \

					BXT_MIPI2_8X_BY3_SHIFT)

#define  BXT_MIPI1_8X_BY3_DIVIDER_MASK         (3 << 19)

#define  BXT_MIPI2_8X_BY3_DIVIDER_MASK         (3 << 3)

#define  BXT_MIPI_8X_BY3_DIVIDER_MASK(port)    \

			_MIPI_PORT(port, BXT_MIPI1_8X_BY3_DIVIDER_MASK, \

						BXT_MIPI2_8X_BY3_DIVIDER_MASK)

#define  BXT_MIPI_8X_BY3_DIVIDER(port, val)    \

			((val & 3) << BXT_MIPI_8X_BY3_SHIFT(port))

/* RX lower control divider to select actual RX clock output from 8x */

#define  BXT_MIPI1_RX_ESCLK_LOWER_SHIFT		16

#define  BXT_MIPI2_RX_ESCLK_LOWER_SHIFT		0

#define  BXT_MIPI_RX_ESCLK_LOWER_SHIFT(port)		\

			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_LOWER_SHIFT, \

					BXT_MIPI2_RX_ESCLK_LOWER_SHIFT)

#define  BXT_MIPI1_RX_ESCLK_LOWER_FIXDIV_MASK		(3 << 16)

#define  BXT_MIPI2_RX_ESCLK_LOWER_FIXDIV_MASK		(3 << 0)

#define  BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port)	\

			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_LOWER_FIXDIV_MASK, \

					BXT_MIPI2_RX_ESCLK_LOWER_FIXDIV_MASK)

#define  BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, val)	\

		((val & 3) << BXT_MIPI_RX_ESCLK_LOWER_SHIFT(port))



#define RX_DIVIDER_BIT_1_2                     0x3

#define RX_DIVIDER_BIT_3_4                     0xC



/* BXT MIPI mode configure */

#define  _BXT_MIPIA_TRANS_HACTIVE			0x6B0F8

drivers/gpu/drm/i915/intel_dsi_pll.c

+39 −17
Original line number Diff line number Diff line
@@ -362,35 +362,57 @@ static void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) 
/* Program BXT Mipi clocks and dividers */

static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port)

{

	u32 tmp;

	u32 divider;

	u32 dsi_rate;

	u32 pll_ratio;

	struct drm_i915_private *dev_priv = dev->dev_private;

	u32 tmp;

	u32 dsi_rate = 0;

	u32 pll_ratio = 0;

	u32 rx_div;

	u32 tx_div;

	u32 rx_div_upper;

	u32 rx_div_lower;

	u32 mipi_8by3_divider;



	/* Clear old configurations */

	tmp = I915_READ(BXT_MIPI_CLOCK_CTL);

	tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));

	tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port));

	tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port));

	tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port));

	tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port));

	tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port));

	tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port));



	/* Get the current DSI rate(actual) */

	pll_ratio = I915_READ(BXT_DSI_PLL_CTL) &

				BXT_DSI_PLL_RATIO_MASK;

	dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2;



	/* Max possible output of clock is 39.5 MHz, program value -1 */

	divider = (dsi_rate / BXT_MAX_VAR_OUTPUT_KHZ) - 1;

	tmp |= BXT_MIPI_ESCLK_VAR_DIV(port, divider);

	/*

	 * tx clock should be <= 20MHz and the div value must be

	 * subtracted by 1 as per bspec

	 */

	tx_div = DIV_ROUND_UP(dsi_rate, 20000) - 1;

	/*

	 * rx clock should be <= 150MHz and the div value must be

	 * subtracted by 1 as per bspec

	 */

	rx_div = DIV_ROUND_UP(dsi_rate, 150000) - 1;



	/*

	 * Tx escape clock must be as close to 20MHz possible, but should

	 * not exceed it. Hence select divide by 2

	 * rx divider value needs to be updated in the

	 * two differnt bit fields in the register hence splitting the

	 * rx divider value accordingly

	 */

	tmp |= BXT_MIPI_TX_ESCLK_8XDIV_BY2(port);

	rx_div_lower = rx_div & RX_DIVIDER_BIT_1_2;

	rx_div_upper = (rx_div & RX_DIVIDER_BIT_3_4) >> 2;



	/* As per bpsec program the 8/3X clock divider to the below value */

	if (dev_priv->vbt.dsi.config->is_cmd_mode)

		mipi_8by3_divider = 0x2;

	else

		mipi_8by3_divider = 0x3;



	tmp |= BXT_MIPI_RX_ESCLK_8X_BY3(port);

	tmp |= BXT_MIPI_8X_BY3_DIVIDER(port, mipi_8by3_divider);

	tmp |= BXT_MIPI_TX_ESCLK_DIVIDER(port, tx_div);

	tmp |= BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, rx_div_lower);

	tmp |= BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, rx_div_upper);



	I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);

}
@@ -513,9 +535,9 @@ static void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) 
	/* Clear old configurations */

	tmp = I915_READ(BXT_MIPI_CLOCK_CTL);

	tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));

	tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port));

	tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port));

	tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port));

	tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port));

	tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port));

	tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port));

	I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);

	I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);

}