[ARM] pxa/em-x270: add exeda GPIO extender and update GPIO mappings (76e3fc36) · Commits · e / devices / android_kernel_fairphone_FP5

arch/arm/mach-pxa/em-x270.c

+46 −18

Original line number	Diff line number	Diff line
		@@ -28,6 +28,8 @@
		#include <linux/spi/libertas_spi.h>
		#include <linux/power_supply.h>
		#include <linux/apm-emulation.h>
		#include <linux/i2c.h>
		#include <linux/i2c/pca953x.h>

		#include <media/soc_camera.h>

		@@ -52,15 +54,18 @@
		#define GPIO13_MMC_CD (13)
		#define GPIO95_MMC_WP (95)
		#define GPIO56_NAND_RB (56)
		#define GPIO93_CAM_RESET (93)

		/* eXeda specific GPIOs */
		#define GPIO114_MMC_CD (114)
		#define GPIO20_NAND_RB (20)
		#define GPIO38_SD_PWEN (38)
		#define GPIO37_WLAN_RST (37)
		#define GPIO95_TOUCHPAD_INT (95)
		#define GPIO130_CAM_RESET (130)

		/* common GPIOs */
		#define GPIO11_NAND_CS (11)
		#define GPIO93_CAM_RESET (93)
		#define GPIO41_ETHIRQ (41)
		#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
		#define GPIO115_WLAN_PWEN (115)
		@@ -69,6 +74,7 @@
		static int mmc_cd;
		static int nand_rb;
		static int dm9000_flags;
		static int cam_reset;

		static unsigned long common_pin_config[] = {
		/* AC'97 */
		@@ -180,7 +186,6 @@ static unsigned long common_pin_config[] = {

		/* power controls */
		GPIO20_GPIO \| MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
		GPIO93_GPIO \| MFP_LPM_DRIVE_LOW, /* Camera reset */
		GPIO115_GPIO \| MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */

		/* NAND controls */
		@@ -193,12 +198,14 @@ static unsigned long common_pin_config[] = {
		static unsigned long em_x270_pin_config[] = {
		GPIO13_GPIO, /* MMC card detect */
		GPIO56_GPIO, /* NAND Ready/Busy */
		GPIO93_GPIO \| MFP_LPM_DRIVE_LOW, /* Camera reset */
		GPIO95_GPIO, /* MMC Write protect */
		};

		static unsigned long exeda_pin_config[] = {
		GPIO20_GPIO, /* NAND Ready/Busy */
		GPIO38_GPIO \| MFP_LPM_DRIVE_LOW, /* SD slot power */
		GPIO95_GPIO, /* touchpad IRQ */
		GPIO114_GPIO, /* MMC card detect */
		};

		@@ -863,26 +870,26 @@ static int em_x270_sensor_init(struct device *dev)
		{
		int ret;

		ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
		ret = gpio_request(cam_reset, "camera reset");
		if (ret)
		return ret;

		gpio_direction_output(GPIO93_CAM_RESET, 0);
		gpio_direction_output(cam_reset, 0);

		em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
		if (em_x270_camera_ldo == NULL) {
		gpio_free(GPIO93_CAM_RESET);
		gpio_free(cam_reset);
		return -ENODEV;
		}

		ret = regulator_enable(em_x270_camera_ldo);
		if (ret) {
		regulator_put(em_x270_camera_ldo);
		gpio_free(GPIO93_CAM_RESET);
		gpio_free(cam_reset);
		return ret;
		}

		gpio_set_value(GPIO93_CAM_RESET, 1);
		gpio_set_value(cam_reset, 1);

		return 0;
		}
		@@ -902,7 +909,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
		if (on == is_on)
		return 0;

		gpio_set_value(GPIO93_CAM_RESET, !on);
		gpio_set_value(cam_reset, !on);

		if (on)
		ret = regulator_enable(em_x270_camera_ldo);
		@@ -912,7 +919,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
		if (ret)
		return ret;

		gpio_set_value(GPIO93_CAM_RESET, on);
		gpio_set_value(cam_reset, on);

		return 0;
		}
		@@ -929,13 +936,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = {
		},
		};

		static struct i2c_pxa_platform_data em_x270_i2c_info = {
		.fast_mode = 1,
		};

		static void __init em_x270_init_camera(void)
		{
		pxa_set_i2c_info(&em_x270_i2c_info);
		i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
		pxa_set_camera_info(&em_x270_camera_platform_data);
		}
		@@ -1069,6 +1071,29 @@ static void __init em_x270_init_da9030(void)
		i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
		}

		static struct pca953x_platform_data exeda_gpio_ext_pdata = {
		.gpio_base = 128,
		};

		static struct i2c_board_info exeda_i2c_info[] = {
		{
		I2C_BOARD_INFO("pca9555", 0x21),
		.platform_data = &exeda_gpio_ext_pdata,
		},
		};

		static struct i2c_pxa_platform_data em_x270_i2c_info = {
		.fast_mode = 1,
		};

		static void __init em_x270_init_i2c(void)
		{
		pxa_set_i2c_info(&em_x270_i2c_info);

		if (machine_is_exeda())
		i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
		}

		static void __init em_x270_module_init(void)
		{
		pr_info("%s\n", __func__);
		@@ -1077,6 +1102,7 @@ static void __init em_x270_module_init(void)
		mmc_cd = GPIO13_MMC_CD;
		nand_rb = GPIO56_NAND_RB;
		dm9000_flags = DM9000_PLATF_32BITONLY;
		cam_reset = GPIO93_CAM_RESET;
		}

		static void __init em_x270_exeda_init(void)
		@@ -1087,6 +1113,7 @@ static void __init em_x270_exeda_init(void)
		mmc_cd = GPIO114_MMC_CD;
		nand_rb = GPIO20_NAND_RB;
		dm9000_flags = DM9000_PLATF_16BITONLY;
		cam_reset = GPIO130_CAM_RESET;
		}

		static void __init em_x270_init(void)
		@@ -1111,8 +1138,9 @@ static void __init em_x270_init(void)
		em_x270_init_keypad();
		em_x270_init_gpio_keys();
		em_x270_init_ac97();
		em_x270_init_camera();
		em_x270_init_spi();
		em_x270_init_i2c();
		em_x270_init_camera();
		}

		MACHINE_START(EM_X270, "Compulab EM-X270")