Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 71e79bb6 authored by Anil Kumar Kanakanti's avatar Anil Kumar Kanakanti
Browse files

ARM: dts: msm: Add support for Yupik camera sensor 

Add Wide, Ultra Wide and Tele camera sensor module nodes.

CRs-Fixed: 2837508
Change-Id: I2189a4380e56727a2ac560d84c2186019f8f9668
parent 7a1d7021

yupik-camera-sensor-idp.dtsi

0 → 100644
+386 −0
Original line number Diff line number Diff line 
#include <dt-bindings/clock/qcom,camcc-yupik.h>



&soc {

	led_flash_triple_rear: qcom,camera-flash@4 {

		cell-index = <4>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8350c_flash0 &pm8350c_flash1>;

		torch-source = <&pm8350c_torch0 &pm8350c_torch1>;

		switch-source = <&pm8350c_switch2>;

		status = "ok";

	};



	led_flash_triple_rear_aux: qcom,camera-flash@5 {

		cell-index = <5>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8350c_flash0 &pm8350c_flash1>;

		torch-source = <&pm8350c_torch0 &pm8350c_torch1>;

		switch-source = <&pm8350c_switch2>;

		status = "ok";

	};



	led_flash_triple_rear_aux2: qcom,camera-flash@6 {

		cell-index = <6>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8350c_flash0 &pm8350c_flash1>;

		torch-source = <&pm8350c_torch0 &pm8350c_torch1>;

		switch-source = <&pm8350c_switch2>;

		status = "ok";

	};



	qcom,cam-res-mgr {

		compatible = "qcom,cam-res-mgr";

		status = "ok";

	};

};



&cam_cci0 {

	actuator_triple_wide: qcom,actuator0 {

		cell-index = <4>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&L7I>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2960000>;

		rgltr-max-voltage = <3000000>;

		rgltr-load-current = <103000>;

	};



	actuator_triple_tele: qcom,actuator1 {

		cell-index = <5>;

		compatible = "qcom,actuator";

		cci-master = <1>;

		cam_vaf-supply = <&L7I>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2960000>;

		rgltr-max-voltage = <3000000>;

		rgltr-load-current = <103000>;

	};



	eeprom_triple_wide: qcom,eeprom0 {

		cell-index = <4>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L3J>;

		cam_vana-supply = <&L3I>;

		cam_vana1-supply = <&L5I>;

		cam_vdig-supply = <&L1I>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vaf-supply = <&L7I>;

		regulator-names = "cam_vio", "cam_vana", "cam_vana1",

			"cam_vdig", "cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2904000 1800000 1104000 0 2960000>;

		rgltr-max-voltage = <1800000 3000000 1900000 1200000 0 3000000>;

		rgltr-load-current = <5000 68000 74000 805000 0 103000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rst0>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rst0>;

		gpios = <&tlmm 64 0>,

			<&tlmm 20 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};



	eeprom_triple_tele: qcom,eeprom1 {

		cell-index = <5>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L3J>;

		cam_vana-supply = <&L4I>;

		cam_vdig-supply = <&L2I>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vaf-supply = <&L7I>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0 2960000>;

		rgltr-max-voltage = <1800000 2900000 1150000 0 3000000>;

		rgltr-load-current = <10000 52000 140000 0 103000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_active_rst1>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_suspend_rst1>;

		gpios = <&tlmm 65 0>,

			<&tlmm 21 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		cci-master = <1>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};



	/* Rear (W) */

	qcom,cam-sensor0 {

		cell-index = <4>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <0>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		actuator-src = <&actuator_triple_wide>;

		eeprom-src = <&eeprom_triple_wide>;

		led-flash-src = <&led_flash_triple_rear>;

		cam_vio-supply = <&L3J>;

		cam_vana-supply = <&L3I>;

		cam_v_custom1-supply = <&L5I>;

		cam_vdig-supply = <&L1I>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&BOB>;

		regulator-names = "cam_vio", "cam_vana", "cam_v_custom1",

			"cam_vdig","cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2904000 1800000 1104000 0 3296000>;

		rgltr-max-voltage = <1800000 3000000 1900000 1200000 0 3960000>;

		rgltr-load-current = <5000 68000 74000 805000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rst0>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rst0>;

		gpios = <&tlmm 64 0>,

			<&tlmm 20 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};



	/* Rear-aux (T) */

	qcom,cam-sensor1 {

		cell-index = <5>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_triple_tele>;

		actuator-src = <&actuator_triple_tele>;

		led-flash-src = <&led_flash_triple_rear_aux>;

		cam_vio-supply = <&L3J>;

		cam_vana-supply = <&L4I>;

		cam_vdig-supply = <&L2I>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&BOB>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0 3296000>;

		rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;

		rgltr-load-current = <10000 52000 140000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&cam_sensor_active_rst1>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_sensor_suspend_rst1>;

		gpios = <&tlmm 65 0>,

			<&tlmm 21 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		cci-master = <1>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};

};



&cam_cci1 {

	actuator_triple_uw: qcom,actuator2 {

		cell-index = <6>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&L7I>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2960000>;

		rgltr-max-voltage = <3000000>;

		rgltr-load-current = <103000>;

	};



	eeprom_triple_uw: qcom,eeprom2 {

		cell-index = <6>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L3J>;

		cam_vana-supply = <&L6I>;

		cam_vdig-supply = <&L2I>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vaf-supply = <&L7I>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0 2960000>;

		rgltr-max-voltage = <1800000 2900000 1150000 0 3000000>;

		rgltr-load-current = <3000 52000 257000 0 103000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_rst2>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_rst2>;

		gpios = <&tlmm 66 0>,

			<&tlmm 77 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};



	eeprom_front: qcom,eeprom3 {

		cell-index = <2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L3J>;

		cam_vana-supply = <&L5J>;

		cam_vdig-supply = <&L1J>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0>;

		rgltr-max-voltage = <1800000 2900000 1150000 0>;

		rgltr-load-current = <5000 35000 301000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				 &cam_sensor_active_rst3>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				 &cam_sensor_suspend_rst3>;

		gpios = <&tlmm 67 0>,

			<&tlmm 78 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3";

		cci-master = <1>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};



	/* Rear-aux (UW) */

	qcom,cam-sensor2 {

		cell-index = <6>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <2>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_triple_uw>;

		actuator-src = <&actuator_triple_uw>;

		led-flash-src = <&led_flash_triple_rear_aux2>;

		cam_vio-supply = <&L3J>;

		cam_vana-supply = <&L6I>;

		cam_vdig-supply = <&L2I>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&BOB>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0 3296000>;

		rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;

		rgltr-load-current = <3000 52000 257000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_rst2>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_rst2>;

		gpios = <&tlmm 66 0>,

			<&tlmm 77 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};



	/* Front */

	qcom,cam-sensor3 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <3>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_front>;

		cam_vio-supply = <&L3J>;

		cam_vana-supply = <&L5J>;

		cam_vdig-supply = <&L1J>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&BOB>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0 3296000>;

		rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;

		rgltr-load-current = <5000 35000 301000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				 &cam_sensor_active_rst3>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				 &cam_sensor_suspend_rst3>;

		gpios = <&tlmm 67 0>,

			<&tlmm 78 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3";

		cci-master = <1>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};

};