UAPI: (Scripted) Disintegrate arch/parisc/include/asm (70c1674f) · Commits · e / devices / android_kernel_fairphone_FP5

arch/parisc/include/asm/Kbuild

+0 −2

Original line number	Diff line number	Diff line
		include include/asm-generic/Kbuild.asm

		header-y += pdc.h
		generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \
		segment.h topology.h vga.h device.h percpu.h hw_irq.h mutex.h \
		div64.h irq_regs.h kdebug.h kvm_para.h local64.h local.h param.h \

arch/parisc/include/asm/pdc.h

+1 −422

Original line number	Diff line number	Diff line
		#ifndef _PARISC_PDC_H
		#define _PARISC_PDC_H

		/*
		* PDC return values ...
		* All PDC calls return a subset of these errors.
		*/

		#define PDC_WARN 3 /* Call completed with a warning */
		#define PDC_REQ_ERR_1 2 /* See above */
		#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */
		#define PDC_OK 0 /* Call completed successfully */
		#define PDC_BAD_PROC -1 /* Called non-existent procedure*/
		#define PDC_BAD_OPTION -2 /* Called with non-existent option */
		#define PDC_ERROR -3 /* Call could not complete without an error */
		#define PDC_NE_MOD -5 /* Module not found */
		#define PDC_NE_CELL_MOD -7 /* Cell module not found */
		#define PDC_INVALID_ARG -10 /* Called with an invalid argument */
		#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
		#define PDC_NOT_NARROW -17 /* Narrow mode not supported */

		/*
		* PDC entry points...
		*/

		#define PDC_POW_FAIL 1 /* perform a power-fail */
		#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */

		#define PDC_CHASSIS 2 /* PDC-chassis functions */
		#define PDC_CHASSIS_DISP 0 /* update chassis display */
		#define PDC_CHASSIS_WARN 1 /* return chassis warnings */
		#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */
		#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */

		#define PDC_PIM 3 /* Get PIM data */
		#define PDC_PIM_HPMC 0 /* Transfer HPMC data */
		#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/
		#define PDC_PIM_LPMC 2 /* Transfer HPMC data */
		#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */
		#define PDC_PIM_TOC 4 /* Transfer TOC data */

		#define PDC_MODEL 4 /* PDC model information call */
		#define PDC_MODEL_INFO 0 /* returns information */
		#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */
		#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/
		#define PDC_MODEL_SYSMODEL 3 /* return system model info */
		#define PDC_MODEL_ENSPEC 4 /* enable specific option */
		#define PDC_MODEL_DISPEC 5 /* disable specific option */
		#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
		#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
		/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
		#define PDC_MODEL_OS64 (1 << 0)
		#define PDC_MODEL_OS32 (1 << 1)
		#define PDC_MODEL_IOPDIR_FDC (1 << 2)
		#define PDC_MODEL_NVA_MASK (3 << 4)
		#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
		#define PDC_MODEL_NVA_SLOW (1 << 4)
		#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
		#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
		#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */

		#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */
		#define PA90_INSTRUCTION_SET 0x8

		#define PDC_CACHE 5 /* return/set cache (& TLB) info*/
		#define PDC_CACHE_INFO 0 /* returns information */
		#define PDC_CACHE_SET_COH 1 /* set coherence state */
		#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */

		#define PDC_HPA 6 /* return HPA of processor */
		#define PDC_HPA_PROCESSOR 0
		#define PDC_HPA_MODULES 1

		#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */
		#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */

		#define PDC_IODC 8 /* talk to IODC */
		#define PDC_IODC_READ 0 /* read IODC entry point */
		/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */
		#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */
		/* 1, 2 obsolete - HVERSION dependent*/
		#define PDC_IODC_RI_INIT 3 /* Initialize module */
		#define PDC_IODC_RI_IO 4 /* Module input/output */
		#define PDC_IODC_RI_SPA 5 /* Module input/output */
		#define PDC_IODC_RI_CONFIG 6 /* Module input/output */
		/* 7 obsolete - HVERSION dependent */
		#define PDC_IODC_RI_TEST 8 /* Module input/output */
		#define PDC_IODC_RI_TLB 9 /* Module input/output */
		#define PDC_IODC_NINIT 2 /* non-destructive init */
		#define PDC_IODC_DINIT 3 /* destructive init */
		#define PDC_IODC_MEMERR 4 /* check for memory errors */
		#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */
		#define PDC_IODC_BUS_ERROR -4 /* bus error return value */
		#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */
		#define PDC_IODC_COUNT -6 /* count is too small */

		#define PDC_TOD 9 /* time-of-day clock (TOD) */
		#define PDC_TOD_READ 0 /* read TOD */
		#define PDC_TOD_WRITE 1 /* write TOD */


		#define PDC_STABLE 10 /* stable storage (sprockets) */
		#define PDC_STABLE_READ 0
		#define PDC_STABLE_WRITE 1
		#define PDC_STABLE_RETURN_SIZE 2
		#define PDC_STABLE_VERIFY_CONTENTS 3
		#define PDC_STABLE_INITIALIZE 4

		#define PDC_NVOLATILE 11 /* often not implemented */

		#define PDC_ADD_VALID 12 /* Memory validation PDC call */
		#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */

		#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */

		#define PDC_PROC 16 /* (sprockets) */

		#define PDC_CONFIG 16 /* (sprockets) */
		#define PDC_CONFIG_DECONFIG 0
		#define PDC_CONFIG_DRECONFIG 1
		#define PDC_CONFIG_DRETURN_CONFIG 2

		#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */
		#define PDC_BTLB_INFO 0 /* returns parameter */
		#define PDC_BTLB_INSERT 1 /* insert BTLB entry */
		#define PDC_BTLB_PURGE 2 /* purge BTLB entries */
		#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */

		#define PDC_TLB 19 /* manage hardware TLB miss handling */
		#define PDC_TLB_INFO 0 /* returns parameter */
		#define PDC_TLB_SETUP 1 /* set up miss handling */

		#define PDC_MEM 20 /* Manage memory */
		#define PDC_MEM_MEMINFO 0
		#define PDC_MEM_ADD_PAGE 1
		#define PDC_MEM_CLEAR_PDT 2
		#define PDC_MEM_READ_PDT 3
		#define PDC_MEM_RESET_CLEAR 4
		#define PDC_MEM_GOODMEM 5
		#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */
		#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE
		#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131
		#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132
		#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133

		#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */
		#define PDC_MEM_RET_DUPLICATE_ENTRY 4
		#define PDC_MEM_RET_BUF_SIZE_SMALL 1
		#define PDC_MEM_RET_PDT_FULL -11
		#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL

		#define PDC_PSW 21 /* Get/Set default System Mask */
		#define PDC_PSW_MASK 0 /* Return mask */
		#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
		#define PDC_PSW_SET_DEFAULTS 2 /* Set default */
		#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */
		#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */

		#define PDC_SYSTEM_MAP 22 /* find system modules */
		#define PDC_FIND_MODULE 0
		#define PDC_FIND_ADDRESS 1
		#define PDC_TRANSLATE_PATH 2

		#define PDC_SOFT_POWER 23 /* soft power switch */
		#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */
		#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */


		/* HVERSION dependent */

		/* The PDC_MEM_MAP calls */
		#define PDC_MEM_MAP 128 /* on s700: return page info */
		#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */

		#define PDC_EEPROM 129 /* EEPROM access */
		#define PDC_EEPROM_READ_WORD 0
		#define PDC_EEPROM_WRITE_WORD 1
		#define PDC_EEPROM_READ_BYTE 2
		#define PDC_EEPROM_WRITE_BYTE 3
		#define PDC_EEPROM_EEPROM_PASSWORD -1000

		#define PDC_NVM 130 /* NVM (non-volatile memory) access */
		#define PDC_NVM_READ_WORD 0
		#define PDC_NVM_WRITE_WORD 1
		#define PDC_NVM_READ_BYTE 2
		#define PDC_NVM_WRITE_BYTE 3

		#define PDC_SEED_ERROR 132 /* (sprockets) */

		#define PDC_IO 135 /* log error info, reset IO system */
		#define PDC_IO_READ_AND_CLEAR_ERRORS 0
		#define PDC_IO_RESET 1
		#define PDC_IO_RESET_DEVICES 2
		/* sets bits 6&7 (little endian) of the HcControl Register */
		#define PDC_IO_USB_SUSPEND 0xC000000000000000
		#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */
		#define PDC_IO_NO_SUSPEND -6 /* return value */

		#define PDC_BROADCAST_RESET 136 /* reset all processors */
		#define PDC_DO_RESET 0 /* option: perform a broadcast reset */
		#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */
		#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */
		#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */

		#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */
		#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */

		#define PDC_LAN_STATION_ID_SIZE 6

		#define PDC_CHECK_RANGES 139 /* (sprockets) */

		#define PDC_NV_SECTIONS 141 /* (sprockets) */

		#define PDC_PERFORMANCE 142 /* performance monitoring */

		#define PDC_SYSTEM_INFO 143 /* system information */
		#define PDC_SYSINFO_RETURN_INFO_SIZE 0
		#define PDC_SYSINFO_RRETURN_SYS_INFO 1
		#define PDC_SYSINFO_RRETURN_ERRORS 2
		#define PDC_SYSINFO_RRETURN_WARNINGS 3
		#define PDC_SYSINFO_RETURN_REVISIONS 4
		#define PDC_SYSINFO_RRETURN_DIAGNOSE 5
		#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005

		#define PDC_RDR 144 /* (sprockets) */
		#define PDC_RDR_READ_BUFFER 0
		#define PDC_RDR_READ_SINGLE 1
		#define PDC_RDR_WRITE_SINGLE 2

		#define PDC_INTRIGUE 145 /* (sprockets) */
		#define PDC_INTRIGUE_WRITE_BUFFER 0
		#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
		#define PDC_INTRIGUE_START_CPU_COUNTERS 2
		#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3

		#define PDC_STI 146 /* STI access */
		/* same as PDC_PCI_XXX values (see below) */

		/* Legacy PDC definitions for same stuff */
		#define PDC_PCI_INDEX 147
		#define PDC_PCI_INTERFACE_INFO 0
		#define PDC_PCI_SLOT_INFO 1
		#define PDC_PCI_INFLIGHT_BYTES 2
		#define PDC_PCI_READ_CONFIG 3
		#define PDC_PCI_WRITE_CONFIG 4
		#define PDC_PCI_READ_PCI_IO 5
		#define PDC_PCI_WRITE_PCI_IO 6
		#define PDC_PCI_READ_CONFIG_DELAY 7
		#define PDC_PCI_UPDATE_CONFIG_DELAY 8
		#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9
		#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10
		#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11
		#define PDC_PCI_PCI_RESERVED 12
		#define PDC_PCI_PCI_INT_ROUTE_SIZE 13
		#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE
		#define PDC_PCI_PCI_INT_ROUTE 14
		#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE
		#define PDC_PCI_READ_MON_TYPE 15
		#define PDC_PCI_WRITE_MON_TYPE 16


		/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */
		#define PDC_INITIATOR 163
		#define PDC_GET_INITIATOR 0
		#define PDC_SET_INITIATOR 1
		#define PDC_DELETE_INITIATOR 2
		#define PDC_RETURN_TABLE_SIZE 3
		#define PDC_RETURN_TABLE 4

		#define PDC_LINK 165 /* (sprockets) */
		#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
		#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */

		/* cl_class
		* page 3-33 of IO-Firmware ARS
		* IODC ENTRY_INIT(Search first) RET[1]
		*/
		#define CL_NULL 0 /* invalid */
		#define CL_RANDOM 1 /* random access (as disk) */
		#define CL_SEQU 2 /* sequential access (as tape) */
		#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
		#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
		#define CL_DISPL 9 /* half-duplex console (display) */
		#define CL_FC 10 /* FiberChannel access media */

		/* IODC ENTRY_INIT() */
		#define ENTRY_INIT_SRCH_FRST 2
		#define ENTRY_INIT_SRCH_NEXT 3
		#define ENTRY_INIT_MOD_DEV 4
		#define ENTRY_INIT_DEV 5
		#define ENTRY_INIT_MOD 6
		#define ENTRY_INIT_MSG 9

		/* IODC ENTRY_IO() */
		#define ENTRY_IO_BOOTIN 0
		#define ENTRY_IO_BOOTOUT 1
		#define ENTRY_IO_CIN 2
		#define ENTRY_IO_COUT 3
		#define ENTRY_IO_CLOSE 4
		#define ENTRY_IO_GETMSG 9
		#define ENTRY_IO_BBLOCK_IN 16
		#define ENTRY_IO_BBLOCK_OUT 17

		/* IODC ENTRY_SPA() */

		/* IODC ENTRY_CONFIG() */

		/* IODC ENTRY_TEST() */

		/* IODC ENTRY_TLB() */

		/* constants for OS (NVM...) */
		#define OS_ID_NONE 0 /* Undefined OS ID */
		#define OS_ID_HPUX 1 /* HP-UX OS */
		#define OS_ID_MPEXL 2 /* MPE XL OS */
		#define OS_ID_OSF 3 /* OSF OS */
		#define OS_ID_HPRT 4 /* HP-RT OS */
		#define OS_ID_NOVEL 5 /* NOVELL OS */
		#define OS_ID_LINUX 6 /* Linux */


		/* constants for PDC_CHASSIS */
		#define OSTAT_OFF 0
		#define OSTAT_FLT 1
		#define OSTAT_TEST 2
		#define OSTAT_INIT 3
		#define OSTAT_SHUT 4
		#define OSTAT_WARN 5
		#define OSTAT_RUN 6
		#define OSTAT_ON 7

		/* Page Zero constant offsets used by the HPMC handler */
		#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
		#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
		#define BOOT_CONSOLE_PATH_OFFSET 0x3a8

		/* size of the pdc_result buffer for firmware.c */
		#define NUM_PDC_RESULT 32
		#include <uapi/asm/pdc.h>

		#if !defined(__ASSEMBLY__)

		#include <linux/types.h>

		#ifdef __KERNEL__

		extern int pdc_type;

		/* Values for pdc_type */
		@@ -673,88 +335,5 @@ static inline char * os_id_to_string(u16 os_id) {
		}
		}

		#endif /* __KERNEL__ */

		/* flags of the device_path */
		#define PF_AUTOBOOT 0x80
		#define PF_AUTOSEARCH 0x40
		#define PF_TIMER 0x0F

		struct device_path { /* page 1-69 */
		unsigned char flags; /* flags see above! */
		unsigned char bc[6]; /* bus converter routing info */
		unsigned char mod;
		unsigned int layers[6];/* device-specific layer-info */
		} __attribute__((aligned(8))) ;

		struct pz_device {
		struct device_path dp; /* see above */
		/* struct iomod hpa; /
		unsigned int hpa; /* HPA base address */
		/* char spa; /
		unsigned int spa; /* SPA base address */
		/* int (iodc_io)(struct iomod, ...); */
		unsigned int iodc_io; /* device entry point */
		short pad; /* reserved */
		unsigned short cl_class;/* see below */
		} __attribute__((aligned(8))) ;

		struct zeropage {
		/* [0x000] initialize vectors (VEC) */
		unsigned int vec_special; /* must be zero */
		/* int (vec_pow_fail)(void);/
		unsigned int vec_pow_fail; /* power failure handler */
		/* int (vec_toc)(void); /
		unsigned int vec_toc;
		unsigned int vec_toclen;
		/* int (vec_rendz)(void); /
		unsigned int vec_rendz;
		int vec_pow_fail_flen;
		int vec_pad[10];

		/* [0x040] reserved processor dependent */
		int pad0[112];

		/* [0x200] reserved */
		int pad1[84];

		/* [0x350] memory configuration (MC) */
		int memc_cont; /* contiguous mem size (bytes) */
		int memc_phsize; /* physical memory size */
		int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */
		unsigned int mem_pdc_hi; /* used for 64-bit */

		/* [0x360] various parameters for the boot-CPU */
		/* unsigned int mem_booterr[8]; /
		unsigned int mem_booterr[8]; /* ptr to boot errors */
		unsigned int mem_free; /* first location, where OS can be loaded */
		/* struct iomod mem_hpa; /
		unsigned int mem_hpa; /* HPA of the boot-CPU */
		/* int (mem_pdc)(int, ...); /
		unsigned int mem_pdc; /* PDC entry point */
		unsigned int mem_10msec; /* number of clock ticks in 10msec */

		/* [0x390] initial memory module (IMM) */
		/* struct iomod imm_hpa; /
		unsigned int imm_hpa; /* HPA of the IMM */
		int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */
		unsigned int imm_spa_size; /* SPA size of the IMM in bytes */
		unsigned int imm_max_mem; /* bytes of mem in IMM */

		/* [0x3A0] boot console, display device and keyboard */
		struct pz_device mem_cons; /* description of console device */
		struct pz_device mem_boot; /* description of boot device */
		struct pz_device mem_kbd; /* description of keyboard device */

		/* [0x430] reserved */
		int pad430[116];

		/* [0x600] processor dependent */
		__u32 pad600[1];
		__u32 proc_sti; /* pointer to STI ROM */
		__u32 pad608[126];
		};

		#endif /* !defined(__ASSEMBLY__) */

		#endif /* _PARISC_PDC_H */

arch/parisc/include/asm/ptrace.h

+3 −43

Original line number	Diff line number	Diff line
		#ifndef _PARISC_PTRACE_H
		#define _PARISC_PTRACE_H

		/* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg
		** Copyright (C) 2000 Grant Grundler, Hewlett-Packard
		*/
		#ifndef _PARISC_PTRACE_H
		#define _PARISC_PTRACE_H

		#include <linux/types.h>

		/* This struct defines the way the registers are stored on the
		* stack during a system call.
		*
		* N.B. gdb/strace care about the size and offsets within this
		* structure. If you change things, you may break object compatibility
		* for those applications.
		*/

		struct pt_regs {
		unsigned long gr[32]; /* PSW is in gr[0] */
		__u64 fr[32];
		unsigned long sr[ 8];
		unsigned long iasq[2];
		unsigned long iaoq[2];
		unsigned long cr27;
		unsigned long pad0; /* available for other uses */
		unsigned long orig_r28;
		unsigned long ksp;
		unsigned long kpc;
		unsigned long sar; /* CR11 */
		unsigned long iir; /* CR19 */
		unsigned long isr; /* CR20 */
		unsigned long ior; /* CR21 */
		unsigned long ipsw; /* CR22 */
		};
		#include <uapi/asm/ptrace.h>

		/*
		* The numbers chosen here are somewhat arbitrary but absolutely MUST
		* not overlap with any of the number assigned in <linux/ptrace.h>.
		*
		* These ones are taken from IA-64 on the assumption that theirs are
		* the most correct (and we also want to support PTRACE_SINGLEBLOCK
		* since we have taken branch traps too)
		*/
		#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */

		#ifdef __KERNEL__

		#define task_regs(task) ((struct pt_regs ) ((char )(task) + TASK_REGS))

		@@ -58,6 +20,4 @@ struct pt_regs {
		unsigned long profile_pc(struct pt_regs *);


		#endif /* __KERNEL__ */

		#endif

arch/parisc/include/asm/signal.h

+1 −112

Original line number	Diff line number	Diff line
		#ifndef _ASM_PARISC_SIGNAL_H
		#define _ASM_PARISC_SIGNAL_H

		#define SIGHUP 1
		#define SIGINT 2
		#define SIGQUIT 3
		#define SIGILL 4
		#define SIGTRAP 5
		#define SIGABRT 6
		#define SIGIOT 6
		#define SIGEMT 7
		#define SIGFPE 8
		#define SIGKILL 9
		#define SIGBUS 10
		#define SIGSEGV 11
		#define SIGSYS 12 /* Linux doesn't use this */
		#define SIGPIPE 13
		#define SIGALRM 14
		#define SIGTERM 15
		#define SIGUSR1 16
		#define SIGUSR2 17
		#define SIGCHLD 18
		#define SIGPWR 19
		#define SIGVTALRM 20
		#define SIGPROF 21
		#define SIGIO 22
		#define SIGPOLL SIGIO
		#define SIGWINCH 23
		#define SIGSTOP 24
		#define SIGTSTP 25
		#define SIGCONT 26
		#define SIGTTIN 27
		#define SIGTTOU 28
		#define SIGURG 29
		#define SIGLOST 30 /* Linux doesn't use this either */
		#define SIGUNUSED 31
		#define SIGRESERVE SIGUNUSED
		#include <uapi/asm/signal.h>

		#define SIGXCPU 33
		#define SIGXFSZ 34
		#define SIGSTKFLT 36

		/* These should not be considered constants from userland. */
		#define SIGRTMIN 37
		#define SIGRTMAX _NSIG /* it's 44 under HP/UX */

		/*
		* SA_FLAGS values:
		*
		* SA_ONSTACK indicates that a registered stack_t will be used.
		* SA_RESTART flag to get restarting signals (which were the default long ago)
		* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
		* SA_RESETHAND clears the handler when the signal is delivered.
		* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
		* SA_NODEFER prevents the current signal from being masked in the handler.
		*
		* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
		* Unix names RESETHAND and NODEFER respectively.
		*/
		#define SA_ONSTACK 0x00000001
		#define SA_RESETHAND 0x00000004
		#define SA_NOCLDSTOP 0x00000008
		#define SA_SIGINFO 0x00000010
		#define SA_NODEFER 0x00000020
		#define SA_RESTART 0x00000040
		#define SA_NOCLDWAIT 0x00000080
		#define _SA_SIGGFAULT 0x00000100 /* HPUX */

		#define SA_NOMASK SA_NODEFER
		#define SA_ONESHOT SA_RESETHAND

		#define SA_RESTORER 0x04000000 /* obsolete -- ignored */

		/*
		* sigaltstack controls
		*/
		#define SS_ONSTACK 1
		#define SS_DISABLE 2

		#define MINSIGSTKSZ 2048
		#define SIGSTKSZ 8192

		#ifdef __KERNEL__

		#define _NSIG 64
		/* bits-per-word, where word apparently means 'long' not 'int' */
		#define _NSIG_BPW BITS_PER_LONG
		#define _NSIG_WORDS (_NSIG / _NSIG_BPW)

		#endif /* __KERNEL__ */

		#define SIG_BLOCK 0 /* for blocking signals */
		#define SIG_UNBLOCK 1 /* for unblocking signals */
		#define SIG_SETMASK 2 /* for setting the signal mask */

		#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
		#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
		#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */

		# ifndef __ASSEMBLY__

		# include <linux/types.h>

		/* Avoid too many header ordering problems. */
		struct siginfo;

		/* Type of a signal handler. */
		#ifdef CONFIG_64BIT
		/* function pointers on 64-bit parisc are pointers to little structs and the
		* compiler doesn't support code which changes or tests the address of
		* the function in the little struct. This is really ugly -PB
		*/
		typedef char __user *__sighandler_t;
		#else
		typedef void __signalfn_t(int);
		typedef __signalfn_t __user *__sighandler_t;
		#endif

		typedef struct sigaltstack {
		void __user *ss_sp;
		int ss_flags;
		size_t ss_size;
		} stack_t;

		#ifdef __KERNEL__

		/* Most things should be clean enough to redefine this at will, if care
		is taken to make libc match. */

		@@ -148,6 +38,5 @@ struct k_sigaction {

		#include <asm/sigcontext.h>

		#endif /* __KERNEL__ */
		#endif /* !__ASSEMBLY */
		#endif /* _ASM_PARISC_SIGNAL_H */

arch/parisc/include/asm/termios.h

+1 −40

Original line number	Diff line number	Diff line
		#ifndef _PARISC_TERMIOS_H
		#define _PARISC_TERMIOS_H

		#include <asm/termbits.h>
		#include <asm/ioctls.h>
		#include <uapi/asm/termios.h>

		struct winsize {
		unsigned short ws_row;
		unsigned short ws_col;
		unsigned short ws_xpixel;
		unsigned short ws_ypixel;
		};

		#define NCC 8
		struct termio {
		unsigned short c_iflag; /* input mode flags */
		unsigned short c_oflag; /* output mode flags */
		unsigned short c_cflag; /* control mode flags */
		unsigned short c_lflag; /* local mode flags */
		unsigned char c_line; /* line discipline */
		unsigned char c_cc[NCC]; /* control characters */
		};

		/* modem lines */
		#define TIOCM_LE 0x001
		#define TIOCM_DTR 0x002
		#define TIOCM_RTS 0x004
		#define TIOCM_ST 0x008
		#define TIOCM_SR 0x010
		#define TIOCM_CTS 0x020
		#define TIOCM_CAR 0x040
		#define TIOCM_RNG 0x080
		#define TIOCM_DSR 0x100
		#define TIOCM_CD TIOCM_CAR
		#define TIOCM_RI TIOCM_RNG
		#define TIOCM_OUT1 0x2000
		#define TIOCM_OUT2 0x4000
		#define TIOCM_LOOP 0x8000

		/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */

		#ifdef __KERNEL__

		/* intr=^C quit=^\ erase=del kill=^U
		eof=^D vtime=\0 vmin=\1 sxtc=\0
		@@ -85,6 +48,4 @@ struct termio {
		#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
		#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))

		#endif /* __KERNEL__ */

		#endif /* _PARISC_TERMIOS_H */