Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6877f54e authored by Prabhanjan Sarnaik's avatar Prabhanjan Sarnaik Committed by David S. Miller
Browse files

mv643xx_eth: fix unicast filter programming in promiscuous mode



The Unicast Promiscious Mode (UPM) bit in the mv643xx_eth port
configuration register doesn't do exactly what its name would suggest:
setting this bit merely enables reception of all unicast frames with a
destination address that differs from our local MAC address in bits
[47:4].  In particular, it doesn't have any effect on unicast frames
with a destination address that matches our MAC address in bits [47:4]
-- these will still be tested against the 16-entry unicast address
filter table.

Therefore, if the interface is set to promiscuous mode, just setting
the unicast promiscuous bit isn't enough -- we need to set all filter
bits in the unicast filter table to 1 as well.

Reported-by: default avatarSachin Sanap <ssanap@marvell.com>
Signed-off-by: default avatarPrabhanjan Sarnaik <sarnaik@marvell.com>
Tested-by: default avatarSiddarth Gore <gores@marvell.com>
Tested-by: default avatarMahavir Jain <mjain@marvell.com>
Signed-off-by: default avatarLennert Buytenhek <buytenh@marvell.com>
Cc: stable@kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 40c27eea
Loading
Loading
Loading
Loading
+3 −4
Original line number Diff line number Diff line
@@ -1750,12 +1750,12 @@ static void mv643xx_eth_program_unicast_filter(struct net_device *dev)

	uc_addr_set(mp, dev->dev_addr);

	port_config = rdlp(mp, PORT_CONFIG);
	port_config = rdlp(mp, PORT_CONFIG) & ~UNICAST_PROMISCUOUS_MODE;

	nibbles = uc_addr_filter_mask(dev);
	if (!nibbles) {
		port_config |= UNICAST_PROMISCUOUS_MODE;
		wrlp(mp, PORT_CONFIG, port_config);
		return;
		nibbles = 0xffff;
	}

	for (i = 0; i < 16; i += 4) {
@@ -1776,7 +1776,6 @@ static void mv643xx_eth_program_unicast_filter(struct net_device *dev)
		wrl(mp, off, v);
	}

	port_config &= ~UNICAST_PROMISCUOUS_MODE;
	wrlp(mp, PORT_CONFIG, port_config);
}