Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 65b8a22a authored by Lina Iyer's avatar Lina Iyer Committed by Maulik Shah
Browse files

dt-bindings: pdc: Add SPI config register 

In addition to configuring the PDC, additional registers that interface
the GIC have to be configured to match the GPIO type. The registers on
some QCOM SoCs are access restricted, while on other SoCs are not. They
SoCs with access restriction to these SPI registers need to be written
from the firmware using the SCM interface. Add a flag to indicate if the
register is to be written using SCM interface.

Change-Id: I89ba52ded2451071973b81c83a53964d7ec2e486
parent d9bae78a

bindings/interrupt-controller/qcom,pdc.txt

+10 −2
Original line number Diff line number Diff line
@@ -23,7 +23,8 @@ Properties: 
- reg:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: Specifies the base physical address for PDC hardware.

	Definition: Specifies the base physical address for PDC hardware and

	            the interrupt type configuration register.



- interrupt-cells:

	Usage: required
@@ -50,15 +51,22 @@ Properties: 
		    The second element is the GIC hwirq number for the PDC port.

		    The third element is the number of interrupts in sequence.



- qcom,scm-spi-cfg:

	Usage: optional

	Value type: <bool>

	Definition: Specifies if the SPI configuration registers have to be

		    written from the firmware.



Example:



	pdc: interrupt-controller@b220000 {

		compatible = "qcom,sdm845-pdc";

		reg = <0xb220000 0x30000>;

		reg = <0xb220000 0x30000>, <0x179900f0 0x60>;

		qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;

		#interrupt-cells = <2>;

		interrupt-parent = <&intc>;

		interrupt-controller;

		qcom,scm-spi-cfg;

	};



DT binding of a device that wants to use the GIC SPI 514 as a wakeup