Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6197af3c authored by Pengfei Liu's avatar Pengfei Liu
Browse files

ARM: dts: msm: change roll angle for sensor node 

Need rotate all camera angle for lahaina HDK platform.

Change-Id: I4cf2c2a864cc945c1439af83019210535f3331d0
CRs-Fixed: 2813829
parent 1a34dfec

lahaina-camera-sensor-hdk.dtsi

0 → 100644
+176 −0
Original line number Diff line number Diff line 
&cam_cci0 {

/delete-node/ qcom,cam-sensor0;

/delete-node/ qcom,cam-sensor1;



	qcom,cam-sensor0 {

		cell-index = <5>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <0>;

		sensor-position-roll = <0>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_triple_tele>;

		actuator-src = <&actuator_triple_tele>;

		led-flash-src = <&led_flash_triple_rear_aux>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l4>;

		cam_vdig-supply = <&pm8008i_l2>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2700000 1000000 0 3200000>;

		rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;

		rgltr-load-current = <10000 52000 140000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rst0>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rst0>;

		gpios = <&tlmm 100 0>,

			<&tlmm 17 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor1 {

		cell-index = <4>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <1>;

		sensor-position-roll = <0>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		actuator-src = <&actuator_triple_wide>;

		eeprom-src = <&eeprom_triple_wide>;

		led-flash-src = <&led_flash_triple_rear>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l3>;

		cam_v_custom1-supply = <&pm8008i_l5>;

		cam_vdig-supply = <&pm8008i_l1>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_v_custom1",

			"cam_vdig","cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2700000 1700000 1050000 0 3200000>;

		rgltr-max-voltage = <1800000 3000000 1900000 1200000 0 3960000>;

		rgltr-load-current = <5000 68000 74000 805000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&cam_sensor_active_rst1>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_sensor_suspend_rst1>;

		gpios = <&tlmm 101 0>,

			<&tlmm 16 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};

};



&cam_cci1 {

/delete-node/ qcom,cam-sensor2;

/delete-node/ qcom,cam-sensor5;



	qcom,cam-sensor2 {

		cell-index = <6>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <2>;

		sensor-position-roll = <0>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_triple_uw>;

		actuator-src = <&actuator_triple_uw>;

		led-flash-src = <&led_flash_triple_rear_aux2>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l6>;

		cam_vdig-supply = <&pm8008i_l2>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2700000 1000000 0 3200000>;

		rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;

		rgltr-load-current = <3000 52000 257000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_rst2>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_rst2>;

		gpios = <&tlmm 102 0>,

			<&tlmm 106 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor5 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <5>;

		sensor-position-roll = <0>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_front>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008j_l5>;

		cam_vdig-supply = <&pm8008j_l1>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2700000 1000000 0 3200000>;

		rgltr-max-voltage = <1800000 2900000 1150000 0 3960000>;

		rgltr-load-current = <5000 35000 301000 0 2000000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk5_active

				 &cam_sensor_active_rst5>;

		pinctrl-1 = <&cam_sensor_mclk5_suspend

				 &cam_sensor_suspend_rst5>;

		gpios = <&tlmm 105 0>,

			<&tlmm 115 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK5",

					"CAM_RESET5";

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK5_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

	};

};