Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 61962589 authored by Veera Vegivada's avatar Veera Vegivada
Browse files

ARM: dts: msm: add SPMI PMIC arbiter and PMIC devices for direwolf 

Add an SPMI PMIC arbiter device so that it is possible to
communicate with PMICs attached to the SPMI bus and also
add top level slave devices and their peripherals.

Change-Id: If999da320e3212e787af6d22ceed562b808cf690
parent 7d5dd223

qcom/direwolf-adas.dtsi

+1 −0
Original line number Diff line number Diff line 
#include "direwolf.dtsi"

#include "direwolf-pmic.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. DirewolfAU ADAS SoC";

qcom/direwolf-ivi.dtsi

+1 −0
Original line number Diff line number Diff line 
#include "direwolf.dtsi"

#include "direwolf-ivi-regulators.dtsi"

#include "direwolf-pmic.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. DirewolfAU IVI SoC";

qcom/direwolf-pmic.dtsi

0 → 100644
+115 −0
Original line number Diff line number Diff line 
#include "pm8540.dtsi"



&thermal_zones {

	pm8540_1_temp_alarm: pm8540_1_tz {

		polling-delay-passive = <100>;

		polling-delay = <0>;

		thermal-governor = "step_wise";

		thermal-sensors = <&pm8540_1_tz>;

		wake-capable-sensor;



		trips {

			pm8540_1_trip0: trip0 {

				temperature = <105000>;

				hysteresis = <0>;

				type = "passive";

			};



			pm8540_1_trip1: trip1 {

				temperature = <125000>;

				hysteresis = <0>;

				type = "critical";

			};



			trip2 {

				temperature = <155000>;

				hysteresis = <0>;

				type = "critical";

			};

		};

	};



	pm8540_2_temp_alarm: pm8540_2_tz {

		polling-delay-passive = <100>;

		polling-delay = <0>;

		thermal-governor = "step_wise";

		thermal-sensors = <&pm8540_2_tz>;

		wake-capable-sensor;



		trips {

			pm8540_2_trip0: trip0 {

				temperature = <105000>;

				hysteresis = <0>;

				type = "passive";

			};



			pm8540_2_trip1: trip1 {

				temperature = <125000>;

				hysteresis = <0>;

				type = "critical";

			};



			trip2 {

				temperature = <155000>;

				hysteresis = <0>;

				type = "critical";

			};

		};

	};



	pm8540_3_temp_alarm: pm8540_3_tz {

		polling-delay-passive = <100>;

		polling-delay = <0>;

		thermal-governor = "step_wise";

		thermal-sensors = <&pm8540_3_tz>;

		wake-capable-sensor;



		trips {

			pm8540_3_trip0: trip0 {

				temperature = <105000>;

				hysteresis = <0>;

				type = "passive";

			};



			pm8540_3_trip1: trip1 {

				temperature = <125000>;

				hysteresis = <0>;

				type = "critical";

			};



			trip2 {

				temperature = <155000>;

				hysteresis = <0>;

				type = "critical";

			};

		};

	};



	pm8540_4_temp_alarm: pm8540_4_tz {

		polling-delay-passive = <100>;

		polling-delay = <0>;

		thermal-governor = "step_wise";

		thermal-sensors = <&pm8540_4_tz>;

		wake-capable-sensor;



		trips {

			pm8540_4_trip0: trip0 {

				temperature = <105000>;

				hysteresis = <0>;

				type = "passive";

			};



			pm8540_4_trip1: trip1 {

				temperature = <125000>;

				hysteresis = <0>;

				type = "critical";

			};



			trip2 {

				temperature = <155000>;

				hysteresis = <0>;

				type = "critical";

			};

		};

	};

};

qcom/direwolf.dtsi

+22 −0
Original line number Diff line number Diff line
@@ -890,6 +890,28 @@ 
		qcom,freq-hw-domain = <&cpufreq_hw 0>, <&cpufreq_hw 1>;

	};



	spmi_bus: qcom,spmi@c440000 {

		compatible = "qcom,spmi-pmic-arb";

		reg = <0xc440000 0x1100>,

		      <0xc600000 0x2000000>,

		      <0xe600000 0x100000>,

		      <0xe700000 0xa0000>,

		      <0xc40a000 0x26000>;

		reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";

		interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;

		interrupt-names = "periph_irq";

		interrupt-controller;

		#interrupt-cells = <4>;

		#address-cells = <2>;

		#size-cells = <0>;

		cell-index = <0>;

		qcom,channel = <0>;

		qcom,ee = <0>;

	};



	thermal_zones: thermal-zones {

	};



	tlmm: pinctrl@f000000 {

		compatible = "qcom,direwolf-pinctrl";

		reg = <0x0F000000 0x1000000>;

qcom/pm8540.dtsi

0 → 100644
+364 −0
Original line number Diff line number Diff line 
#include <dt-bindings/clock/qcom,rpmh.h>

#include <dt-bindings/iio/qcom,spmi-vadc.h>

#include <dt-bindings/input/qcom,qpnp-power-on.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/spmi/spmi.h>





&spmi_bus {

	#address-cells = <2>;

	#size-cells = <0>;

	interrupt-controller;

	#interrupt-cells = <4>;



	qcom,pm8540@0 {

		compatible = "qcom,spmi-pmic";

		reg = <0 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8540_1_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400>;

			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;

			io-channels = <&pm8540_1_vadc ADC5_DIE_TEMP>;

			io-channel-names = "thermal";

			#thermal-sensor-cells = <0>;

		};



		pm8540_1_vadc: vadc@3100 {

			compatible = "qcom,spmi-adc5";

			reg = <0x3100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			#io-channel-cells = <1>;

			io-channel-ranges;



			/* Channel node */

			ref_gnd {

				reg = <ADC5_REF_GND>;

				label = "ref_gnd";

				qcom,pre-scaling = <1 1>;

			};



			vref_1p25 {

				reg = <ADC5_1P25VREF>;

				label = "vref_1p25";

				qcom,pre-scaling = <1 1>;

			};



			die_temp {

				reg = <ADC5_DIE_TEMP>;

				label = "die_temp";

				qcom,pre-scaling = <1 1>;

			};

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800>;

			interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,

				     <0x0 0x8 0x1 IRQ_TYPE_NONE>;

			interrupt-names = "kpdpwr", "resin";

			qcom,pon-dbc-delay = <15625>;

			qcom,kpdpwr-sw-debounce;

			qcom,system-reset;

			qcom,store-hard-reset-reason;



			qcom,pon_1 {

				qcom,pon-type = <PON_POWER_ON_TYPE_KPDPWR>;

				qcom,pull-up;

				linux,code = <KEY_POWER>;

			};



			qcom,pon_2 {

				qcom,pon-type = <PON_POWER_ON_TYPE_RESIN>;

				qcom,pull-up;

				linux,code = <KEY_VOLUMEDOWN>;

			};

		};



		pm8540_1_clkdiv: clock-controller@5b00 {

			compatible = "qcom,spmi-clkdiv";

			reg = <0x5b00>;

			#clock-cells = <1>;

			qcom,num-clkdivs = <2>;

			clock-output-names = "pm8540_1_div_clk1",

						"pm8540_1_div_clk2";

			clocks = <&rpmhcc RPMH_CXO_CLK>;

			clock-names = "xo";

		};



		pm8540_1_rtc: qcom,pm8540_1_rtc {

			compatible = "qcom,pm8941-rtc";

			reg = <0x6000>, <0x6100>;

			reg-names = "rtc", "alarm";

			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;

		};



		pm8540_1_gpios: pinctrl@c000 {

			compatible = "qcom,pm8150-gpio";

			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};



		pm8540_1_sdam_2: sdam@b100 {

			compatible = "qcom,spmi-sdam";

			reg = <0xb100>;

		};



	};



	qcom,pm8540@1 {

		compatible ="qcom,spmi-pmic";

		reg = <1 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;

	};



	/* below definitions are for the second instance of pm8540 */

	qcom,pm8540@4 {

		compatible = "qcom,spmi-pmic";

		reg = <4 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8540_2_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400>;

			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;

			io-channels = <&pm8540_2_vadc ADC5_DIE_TEMP>;

			io-channel-names = "thermal";

			#thermal-sensor-cells = <0>;

		};



		pm8540_2_vadc: vadc@3100 {

			compatible = "qcom,spmi-adc5";

			reg = <0x3100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			#io-channel-cells = <1>;

			io-channel-ranges;



			/* Channel node */

			ref_gnd {

				reg = <ADC5_REF_GND>;

				label = "ref_gnd";

				qcom,pre-scaling = <1 1>;

			};



			vref_1p25 {

				reg = <ADC5_1P25VREF>;

				label = "vref_1p25";

				qcom,pre-scaling = <1 1>;

			};



			die_temp {

				reg = <ADC5_DIE_TEMP>;

				label = "die_temp";

				qcom,pre-scaling = <1 1>;

			};

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800>;

		};



		pm8540_2_clkdiv: clock-controller@5b00 {

			compatible = "qcom,spmi-clkdiv";

			reg = <0x5b00>;

			#clock-cells = <1>;

			qcom,num-clkdivs = <2>;

			clock-output-names = "pm8540_2_div_clk1",

						"pm8540_2_div_clk2";

			clocks = <&rpmhcc RPMH_CXO_CLK>;

			clock-names = "xo";

			status = "disabled";

		};



		pm8540_2_gpios: pinctrl@c000 {

			compatible = "qcom,pm8150-gpio";

			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};

	};



	qcom,pm8540@5 {

		compatible ="qcom,spmi-pmic";

		reg = <5 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;

	};



	/* below definitions are for the third instance of pm8540 */

	qcom,pm8540@8 {

		compatible = "qcom,spmi-pmic";

		reg = <8 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8540_3_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400>;

			interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;

			io-channels = <&pm8540_3_vadc ADC5_DIE_TEMP>;

			io-channel-names = "thermal";

			#thermal-sensor-cells = <0>;

		};



		pm8540_3_vadc: vadc@3100 {

			compatible = "qcom,spmi-adc5";

			reg = <0x3100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			#io-channel-cells = <1>;

			io-channel-ranges;



			/* Channel node */

			ref_gnd {

				reg = <ADC5_REF_GND>;

				label = "ref_gnd";

				qcom,pre-scaling = <1 1>;

			};



			vref_1p25 {

				reg = <ADC5_1P25VREF>;

				label = "vref_1p25";

				qcom,pre-scaling = <1 1>;

			};



			die_temp {

				reg = <ADC5_DIE_TEMP>;

				label = "die_temp";

				qcom,pre-scaling = <1 1>;

			};

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800>;

		};



		pm8540_3_clkdiv: clock-controller@5b00 {

			compatible = "qcom,spmi-clkdiv";

			reg = <0x5b00>;

			#clock-cells = <1>;

			qcom,num-clkdivs = <2>;

			clock-output-names = "pm8540_3_div_clk1",

						"pm8540_3_div_clk2";

			clocks = <&rpmhcc RPMH_CXO_CLK>;

			clock-names = "xo";

			status = "disabled";

		};



		pm8540_3_gpios: pinctrl@c000 {

			compatible = "qcom,pm8150-gpio";

			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};

	};



	qcom,pm8540@9 {

		compatible ="qcom,spmi-pmic";

		reg = <9 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;

	};



	/* below definitions are for the forth instance of pm8540 */

	qcom,pm8540@C {

		compatible = "qcom,spmi-pmic";

		reg = <12 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;



		pm8540_4_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400>;

			interrupts = <0xC 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;

			io-channels = <&pm8540_4_vadc ADC5_DIE_TEMP>;

			io-channel-names = "thermal";

			#thermal-sensor-cells = <0>;

		};



		pm8540_4_vadc: vadc@3100 {

			compatible = "qcom,spmi-adc5";

			reg = <0x3100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0xC 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			#io-channel-cells = <1>;

			io-channel-ranges;



			/* Channel node */

			ref_gnd {

				reg = <ADC5_REF_GND>;

				label = "ref_gnd";

				qcom,pre-scaling = <1 1>;

			};



			vref_1p25 {

				reg = <ADC5_1P25VREF>;

				label = "vref_1p25";

				qcom,pre-scaling = <1 1>;

			};



			die_temp {

				reg = <ADC5_DIE_TEMP>;

				label = "die_temp";

				qcom,pre-scaling = <1 1>;

			};

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800>;

		};



		pm8540_4_clkdiv: clock-controller@5b00 {

			compatible = "qcom,spmi-clkdiv";

			reg = <0x5b00>;

			#clock-cells = <1>;

			qcom,num-clkdivs = <2>;

			clock-output-names = "pm8540_4_div_clk1",

						"pm8540_4_div_clk2";

			clocks = <&rpmhcc RPMH_CXO_CLK>;

			clock-names = "xo";

			status = "disabled";

		};



		pm8540_4_gpios: pinctrl@c000 {

			compatible = "qcom,pm8150-gpio";

			reg = <0xc000>;

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

		};

	};



	qcom,pm8540@D {

		compatible ="qcom,spmi-pmic";

		reg = <13 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <0>;

	};

};