Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4f3fca55 authored by Jigarkumar Zala's avatar Jigarkumar Zala
Browse files

ARM: dts: camera: Add support for camera hardware for Lito platforms 

Add support for camera for Lito platforms as a part of new project.

Change-Id: Ica2dc26158977371a3dfc27ade1e337b54f7fc9c
parent 441ca425

lito-camera-sensor-cdp.dtsi

0 → 100644
+293 −0
Original line number Diff line number Diff line 
#include <dt-bindings/clock/qcom,camcc-lito.h>



&soc {

	led_flash_rear: qcom,camera-flash@0 {

		cell-index = <0>;

		reg = <0x00 0x00>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

	};



	led_flash_rear_aux: qcom,camera-flash@1 {

		cell-index = <1>;

		reg = <0x01 0x00>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

	};



	qcom,cam-res-mgr {

		compatible = "qcom,cam-res-mgr";

		status = "ok";

	};

};



&cam_cci0 {

	actuator_rear: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&L5P>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <100000>;

		status = "ok";

	};



	eeprom_rear: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L2P>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&L5P>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1104000 0 2800000>;

		rgltr-max-voltage = <1800000 2800000 1104000 0 2800000>;

		rgltr-load-current = <0 80000 105000 0 100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rear>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rear>;

		gpios = <&tlmm 13 0>,

			<&tlmm 30 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_rear_aux: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&S8C>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1350000 0>;

		rgltr-max-voltage = <1800000 2800000 1350000 0>;

		rgltr-load-current = <0 80000 1200000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_active_rear_aux>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_suspend_rear_aux>;

		gpios = <&tlmm 14 0>,

			<&tlmm 29 0>,

			<&tlmm 71 0>;

		gpio-reset = <1>;

		gpio-vdig = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VDIG1";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <1>;

		clocks = <&camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

		status="ok";

	};



	qcom,cam-sensor@0 {

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		reg = <0x0>;

		csiphy-sd-index = <0>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		actuator-src = <&actuator_rear>;

		led-flash-src = <&led_flash_rear>;

		eeprom-src = <&eeprom_rear>;

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L2P>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1104000 0>;

		rgltr-max-voltage = <1800000 2800000 1104000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rear>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rear>;

		gpios = <&tlmm 13 0>,

			<&tlmm 30 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		led-flash-src = <&led_flash_rear_aux>;

		eeprom-src = <&eeprom_rear_aux>;

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&S8C>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1350000 0>;

		rgltr-max-voltage = <1800000 2800000 1350000 0>;

		rgltr-load-current = <0 80000 1200000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&cam_sensor_active_rear_aux>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_sensor_suspend_rear_aux>;

		gpios = <&tlmm 14 0>,

			<&tlmm 29 0>,

			<&tlmm 71 0>;

		gpio-reset = <1>;

		gpio-vdig = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VDIG1";

		sensor-mode = <0>;

		cci-master = <1>;

		clocks = <&camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		status = "ok";

		clock-rates = <24000000>;

	};

};



&cam_cci1 {

	eeprom_front: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0>;

		rgltr-max-voltage = <1800000 2800000 1056000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_front>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_front>;

		gpios = <&tlmm 15 0>,

			<&tlmm 32 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-position = <1>;

		sensor-mode = <0>;

		cci-device = <1>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@2 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		reg = <0x02>;

		csiphy-sd-index = <2>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_front>;

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1056000 0>;

		rgltr-max-voltage = <1800000 2800000 1056000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_front>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_front>;

		gpios = <&tlmm 15 0>,

			<&tlmm 32 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-mode = <0>;

		cci-device = <1>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};

lito-camera-sensor-mtp.dtsi

0 → 100644
+293 −0
Original line number Diff line number Diff line 
#include <dt-bindings/clock/qcom,camcc-lito.h>



&soc {

	led_flash_rear: qcom,camera-flash@0 {

		cell-index = <0>;

		reg = <0x00 0x00>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

	};



	led_flash_rear_aux: qcom,camera-flash@1 {

		cell-index = <1>;

		reg = <0x01 0x00>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8150l_flash0 &pm8150l_flash1>;

		torch-source = <&pm8150l_torch0 &pm8150l_torch1>;

		switch-source = <&pm8150l_switch2>;

	};



	qcom,cam-res-mgr {

		compatible = "qcom,cam-res-mgr";

		status = "ok";

	};

};



&cam_cci0 {

	actuator_rear: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&L5P>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <100000>;

		status = "ok";

	};



	eeprom_rear: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L2P>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&L5P>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1104000 0 2800000>;

		rgltr-max-voltage = <1800000 2800000 1104000 0 2800000>;

		rgltr-load-current = <0 80000 105000 0 100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rear>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rear>;

		gpios = <&tlmm 13 0>,

			<&tlmm 30 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_rear_aux: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&S8C>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1350000 0>;

		rgltr-max-voltage = <1800000 2800000 1350000 0>;

		rgltr-load-current = <0 80000 1200000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_active_rear_aux>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_suspend_rear_aux>;

		gpios = <&tlmm 14 0>,

			<&tlmm 29 0>,

			<&tlmm 71 0>;

		gpio-reset = <1>;

		gpio-vdig = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VDIG1";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <1>;

		clocks = <&camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

		status="ok";

	};



	qcom,cam-sensor@0 {

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		reg = <0x0>;

		csiphy-sd-index = <0>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		actuator-src = <&actuator_rear>;

		led-flash-src = <&led_flash_rear>;

		eeprom-src = <&eeprom_rear>;

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L2P>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1104000 0>;

		rgltr-max-voltage = <1800000 2800000 1104000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_active_rear>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_suspend_rear>;

		gpios = <&tlmm 13 0>,

			<&tlmm 30 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		led-flash-src = <&led_flash_rear_aux>;

		eeprom-src = <&eeprom_rear_aux>;

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&S8C>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1350000 0>;

		rgltr-max-voltage = <1800000 2800000 1350000 0>;

		rgltr-load-current = <0 80000 1200000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&cam_sensor_active_rear_aux>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_sensor_suspend_rear_aux>;

		gpios = <&tlmm 14 0>,

			<&tlmm 29 0>,

			<&tlmm 71 0>;

		gpio-reset = <1>;

		gpio-vdig = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VDIG1";

		sensor-mode = <0>;

		cci-master = <1>;

		clocks = <&camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		status = "ok";

		clock-rates = <24000000>;

	};

};



&cam_cci1 {

	eeprom_front: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2800000 1056000 0>;

		rgltr-max-voltage = <1800000 2800000 1056000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_front>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_front>;

		gpios = <&tlmm 15 0>,

			<&tlmm 32 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-position = <1>;

		sensor-mode = <0>;

		cci-device = <1>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@2 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		reg = <0x02>;

		csiphy-sd-index = <2>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_front>;

		cam_vio-supply = <&L7P>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		pwm-switch;

		rgltr-min-voltage = <1800000 2800000 1056000 0>;

		rgltr-max-voltage = <1800000 2800000 1056000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_active_front>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_suspend_front>;

		gpios = <&tlmm 15 0>,

			<&tlmm 32 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-mode = <0>;

		cci-device = <1>;

		cci-master = <0>;

		status = "ok";

		clocks = <&camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};

lito-camera-sensor-qrd.dtsi

0 → 100644
+672 −0

File added.

Preview size limit exceeded, changes collapsed.

lito-camera.dtsi

0 → 100644
+1606 −0

File added.

Preview size limit exceeded, changes collapsed.