Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4ac69546 authored by Eric Long's avatar Eric Long Committed by Vinod Koul
Browse files

dmaengine: sprd: Support DMA link-list mode 



The Spreadtrum DMA can support the link-list transaction mode, which means
DMA controller can do transaction one by one automatically once we linked
these transaction by link-list register.

Signed-off-by: default avatarEric Long <eric.long@spreadtrum.com>
Signed-off-by: default avatarBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent 5b394b2d

drivers/dma/sprd-dma.c

+74 −7
Original line number Diff line number Diff line
@@ -68,6 +68,7 @@ 


/* SPRD_DMA_CHN_CFG register definition */

#define SPRD_DMA_CHN_EN			BIT(0)

#define SPRD_DMA_LINKLIST_EN		BIT(4)

#define SPRD_DMA_WAIT_BDONE_OFFSET	24

#define SPRD_DMA_DONOT_WAIT_BDONE	1
@@ -103,7 +104,7 @@ 
#define SPRD_DMA_REQ_MODE_MASK		GENMASK(1, 0)

#define SPRD_DMA_FIX_SEL_OFFSET		21

#define SPRD_DMA_FIX_EN_OFFSET		20

#define SPRD_DMA_LLIST_END_OFFSET	19

#define SPRD_DMA_LLIST_END		BIT(19)

#define SPRD_DMA_FRG_LEN_MASK		GENMASK(16, 0)



/* SPRD_DMA_CHN_BLK_LEN register definition */
@@ -164,6 +165,7 @@ struct sprd_dma_desc { 
struct sprd_dma_chn {

	struct virt_dma_chan	vc;

	void __iomem		*chn_base;

	struct sprd_dma_linklist	linklist;

	struct dma_slave_config	slave_cfg;

	u32			chn_num;

	u32			dev_id;
@@ -582,7 +584,8 @@ static int sprd_dma_get_step(enum dma_slave_buswidth buswidth) 
}



static int sprd_dma_fill_desc(struct dma_chan *chan,

			      struct sprd_dma_desc *sdesc,

			      struct sprd_dma_chn_hw *hw,

			      unsigned int sglen, int sg_index,

			      dma_addr_t src, dma_addr_t dst, u32 len,

			      enum dma_transfer_direction dir,

			      unsigned long flags,
@@ -590,7 +593,6 @@ static int sprd_dma_fill_desc(struct dma_chan *chan, 
{

	struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan);

	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);

	struct sprd_dma_chn_hw *hw = &sdesc->chn_hw;

	u32 req_mode = (flags >> SPRD_DMA_REQ_SHIFT) & SPRD_DMA_REQ_MODE_MASK;

	u32 int_mode = flags & SPRD_DMA_INT_MASK;

	int src_datawidth, dst_datawidth, src_step, dst_step;
@@ -670,12 +672,52 @@ static int sprd_dma_fill_desc(struct dma_chan *chan, 
	temp |= (src_step & SPRD_DMA_TRSF_STEP_MASK) << SPRD_DMA_SRC_TRSF_STEP_OFFSET;

	hw->trsf_step = temp;



	/* link-list configuration */

	if (schan->linklist.phy_addr) {

		if (sg_index == sglen - 1)

			hw->frg_len |= SPRD_DMA_LLIST_END;



		hw->cfg |= SPRD_DMA_LINKLIST_EN;



		/* link-list index */

		temp = (sg_index + 1) % sglen;

		/* Next link-list configuration's physical address offset */

		temp = temp * sizeof(*hw) + SPRD_DMA_CHN_SRC_ADDR;

		/*

		 * Set the link-list pointer point to next link-list

		 * configuration's physical address.

		 */

		hw->llist_ptr = schan->linklist.phy_addr + temp;

	} else {

		hw->llist_ptr = 0;

	}



	hw->frg_step = 0;

	hw->src_blk_step = 0;

	hw->des_blk_step = 0;

	return 0;

}



static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,

				       unsigned int sglen, int sg_index,

				       dma_addr_t src, dma_addr_t dst, u32 len,

				       enum dma_transfer_direction dir,

				       unsigned long flags,

				       struct dma_slave_config *slave_cfg)

{

	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);

	struct sprd_dma_chn_hw *hw;



	if (!schan->linklist.virt_addr)

		return -EINVAL;



	hw = (struct sprd_dma_chn_hw *)(schan->linklist.virt_addr +

					sg_index * sizeof(*hw));



	return sprd_dma_fill_desc(chan, hw, sglen, sg_index, src, dst, len,

				  dir, flags, slave_cfg);

}



static struct dma_async_tx_descriptor *

sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,

			 size_t len, unsigned long flags)
@@ -744,10 +786,20 @@ sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, 
	u32 len = 0;

	int ret, i;



	/* TODO: now we only support one sg for each DMA configuration. */

	if (!is_slave_direction(dir) || sglen > 1)

	if (!is_slave_direction(dir))

		return NULL;



	if (context) {

		struct sprd_dma_linklist *ll_cfg =

			(struct sprd_dma_linklist *)context;



		schan->linklist.phy_addr = ll_cfg->phy_addr;

		schan->linklist.virt_addr = ll_cfg->virt_addr;

	} else {

		schan->linklist.phy_addr = 0;

		schan->linklist.virt_addr = 0;

	}



	sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);

	if (!sdesc)

		return NULL;
@@ -762,10 +814,25 @@ sprd_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, 
			src = slave_cfg->src_addr;

			dst = sg_dma_address(sg);

		}



		/*

		 * The link-list mode needs at least 2 link-list

		 * configurations. If there is only one sg, it doesn't

		 * need to fill the link-list configuration.

		 */

		if (sglen < 2)

			break;



		ret = sprd_dma_fill_linklist_desc(chan, sglen, i, src, dst, len,

						  dir, flags, slave_cfg);

		if (ret) {

			kfree(sdesc);

			return NULL;

		}

	}



	ret = sprd_dma_fill_desc(chan, sdesc, src, dst, len, dir, flags,

				 slave_cfg);

	ret = sprd_dma_fill_desc(chan, &sdesc->chn_hw, 0, 0, src, dst, len,

				 dir, flags, slave_cfg);

	if (ret) {

		kfree(sdesc);

		return NULL;

include/linux/dma/sprd-dma.h

+69 −0
Original line number Diff line number Diff line
@@ -58,4 +58,73 @@ enum sprd_dma_int_type { 
	SPRD_DMA_CFGERR_INT,

};



/*

 * struct sprd_dma_linklist - DMA link-list address structure

 * @virt_addr: link-list virtual address to configure link-list node

 * @phy_addr: link-list physical address to link DMA transfer

 *

 * The Spreadtrum DMA controller supports the link-list mode, that means slaves

 * can supply several groups configurations (each configuration represents one

 * DMA transfer) saved in memory, and DMA controller will link these groups

 * configurations by writing the physical address of each configuration into the

 * link-list register.

 *

 * Just as shown below, the link-list pointer register will be pointed to the

 * physical address of 'configuration 1', and the 'configuration 1' link-list

 * pointer will be pointed to 'configuration 2', and so on.

 * Once trigger the DMA transfer, the DMA controller will load 'configuration

 * 1' to its registers automatically, after 'configuration 1' transaction is

 * done, DMA controller will load 'configuration 2' automatically, until all

 * DMA transactions are done.

 *

 * Note: The last link-list pointer should point to the physical address

 * of 'configuration 1', which can avoid DMA controller loads incorrect

 * configuration when the last configuration transaction is done.

 *

 *     DMA controller                    linklist memory

 * ======================             -----------------------

 *|                      |           |    configuration 1    |<---

 *|   DMA controller     |   ------->|                       |   |

 *|                      |   |       |                       |   |

 *|                      |   |       |                       |   |

 *|                      |   |       |                       |   |

 *| linklist pointer reg |----   ----|    linklist pointer   |   |

 * ======================        |    -----------------------    |

 *                               |                               |

 *                               |    -----------------------    |

 *                               |   |    configuration 2    |   |

 *                               --->|                       |   |

 *                                   |                       |   |

 *                                   |                       |   |

 *                                   |                       |   |

 *                               ----|    linklist pointer   |   |

 *                               |    -----------------------    |

 *                               |                               |

 *                               |    -----------------------    |

 *                               |   |    configuration 3    |   |

 *                               --->|                       |   |

 *                                   |                       |   |

 *                                   |           .           |   |

 *                                               .               |

 *                                               .               |

 *                                               .               |

 *                               |               .               |

 *                               |    -----------------------    |

 *                               |   |    configuration n    |   |

 *                               --->|                       |   |

 *                                   |                       |   |

 *                                   |                       |   |

 *                                   |                       |   |

 *                                   |    linklist pointer   |----

 *                                    -----------------------

 *

 * To support the link-list mode, DMA slaves should allocate one segment memory

 * from always-on IRAM or dma coherent memory to store these groups of DMA

 * configuration, and pass the virtual and physical address to DMA controller.

 */

struct sprd_dma_linklist {

	unsigned long virt_addr;

	phys_addr_t phy_addr;

};



#endif