dt-bindings: gpi: Add DT bindings for GPI dmaengine driver

Qualcomm Technologies Inc GPI DMA controller

MSM GPI DMA controller provides DMA capabilities for

peripheral buses such as I2C, UART, and SPI.

==============

Node Structure

==============

Main node properties:

- #dma-cells

  Usage: required

  Value type: <u32>

  Definition: Number of parameters client will provide.  Must be set to 5.

	1st parameter: channel index, 0 for TX, 1 for RX

	2nd parameter: serial engine index

	3rd parameter: bus protocol, 1 for SPI, 2 for UART, 3 for I2C

	4th parameter: channel ring length in transfer ring elements

	5th parameter: event processing priority, set to 0 for lowest latency

- compatible

  Usage: required

  Value type: <string>

  Definition: "qcom,gpi-dma"

- reg

  Usage: required

  Value type: Array of <u32>

  Definition: register address space location and size

- reg-name

  Usage: required

  Value type: <string>

  Definition: register space name, must be "gpi-top"

- interrupts

  Usage: required

  Value type: Array of <u32>

  Definition: Array of tuples which describe interrupt line for each GPII

	instance.

- qcom,max-num-gpii

  Usage: required

  Value type: <u32>

  Definition: Total number of GPII instances available for this controller.

- qcom,gpii-mask

  Usage: required

  Value type: <u32>

  Definition: Bitmap of supported GPII instances in hlos.

- qcom,ev-factor

  Usage: required

  Value type: <u32>

  Definition: Event ring transfer size compare to channel transfer ring. Event

	ring length = ev-factor * transfer ring size

- iommus

  Usage: required

  Value type: <phandle u32 u32>

  Definition: phandle for apps smmu controller and SID, and mask

	for the controller.  For more detail please check binding

	documentation arm,smmu.txt

Optional property:

- qcom,gpi-ee-offset

  Usage: optional

  Value type: u64

  Definition: Specifies the gsi ee register offset for the QUP.

- qcom,iommu-dma-addr-pool

  Usage: optional

  Value type: tuple of <address size>.

  Definition: Indicates the range of addresses that the dma layer will use.

========

Example:

========

gpi_dma0: qcom,gpi-dma@0x800000 {

	#dma-cells = <5>;

	compatible = "qcom,gpi-dma";

	reg = <0x800000 0x60000>;

	reg-names = "gpi-top";

	interrupts = <0 244 0>, <0 245 0>, <0 246 0>, <0 247 0>,

                <0 248 0>, <0 249 0>, <0 250 0>, <0 251 0>,

                <0 252 0>, <0 253 0>, <0 254 0>, <0 255 0>,

                <0 256 0>;

	qcom,max-num-gpii = <13>;

	qcom,gpii-mask = <0xfa>;

	qcom,ev-factor = <2>;

	iommus = <&apps_smmu 0x0016 0x0>;

	qcom,iommu-dma-addr-pool = <0x40000000 0xc0000000>;

	status = "ok";

};