Loading drivers/clk/qcom/clk-rcg2.c +48 −7 Original line number Diff line number Diff line Loading @@ -69,6 +69,16 @@ static struct freq_tbl cxo_f = { .n = 0, }; static void update_src_map(struct clk_hw *hw) { struct clk_rcg2 *rcg = to_clk_rcg2(hw); int i, num_parents = clk_hw_get_num_parents(hw); for (i = 0; i < num_parents; i++) if (!rcg->parent_map[i].cfg) cxo_f.src = rcg->parent_map[i].src; } static int clk_rcg2_is_enabled(struct clk_hw *hw) { struct clk_rcg2 *rcg = to_clk_rcg2(hw); Loading Loading @@ -245,16 +255,21 @@ static unsigned long clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_rcg2 *rcg = to_clk_rcg2(hw); u32 cfg, hid_div, m = 0, n = 0, mode = 0, mask; const struct freq_tbl *f_curr; u32 cfg, src, hid_div, m = 0, n = 0, mode = 0, mask; if (rcg->enable_safe_config && !clk_hw_is_prepared(hw)) { regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); src = cfg; src &= CFG_SRC_SEL_MASK; src >>= CFG_SRC_SEL_SHIFT; if (rcg->enable_safe_config && (!clk_hw_is_prepared(hw) || !clk_hw_is_enabled(hw)) && !src) { if (!rcg->current_freq) rcg->current_freq = cxo_f.freq; return rcg->current_freq; } regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); if (rcg->mnd_width) { mask = BIT(rcg->mnd_width) - 1; regmap_read(rcg->clkr.regmap, RCG_M_OFFSET(rcg), &m); Loading @@ -267,9 +282,17 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) mode >>= CFG_MODE_SHIFT; } if (rcg->enable_safe_config && !src) { f_curr = qcom_find_freq(rcg->freq_tbl, rcg->current_freq); if (!f_curr) return -EINVAL; hid_div = f_curr->pre_div; } else { mask = BIT(rcg->hid_width) - 1; hid_div = cfg >> CFG_SRC_DIV_SHIFT; hid_div &= mask; } return calc_rate(parent_rate, m, n, mode, hid_div); } Loading Loading @@ -430,6 +453,12 @@ static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate, if (!f) return -EINVAL; /* * Set the correct source value for CXO as per * as per defined parent map. */ update_src_map(hw); /* * Return if the RCG is currently disabled. This configuration update * will happen as part of the RCG enable sequence. Loading Loading @@ -513,6 +542,12 @@ static int clk_rcg2_enable(struct clk_hw *hw) unsigned long rate; const struct freq_tbl *f; /* * Set the correct source value for CXO as per * as per defined parent map. */ update_src_map(hw); if (rcg->flags & FORCE_ENABLE_RCG) { clk_rcg2_set_force_enable(hw); return 0; Loading Loading @@ -554,6 +589,12 @@ static void clk_rcg2_disable(struct clk_hw *hw) { struct clk_rcg2 *rcg = to_clk_rcg2(hw); /* * Set the correct source value for CXO as per * as per defined parent map. */ update_src_map(hw); if (rcg->flags & FORCE_ENABLE_RCG) { clk_rcg2_clear_force_enable(hw); return; Loading Loading
drivers/clk/qcom/clk-rcg2.c +48 −7 Original line number Diff line number Diff line Loading @@ -69,6 +69,16 @@ static struct freq_tbl cxo_f = { .n = 0, }; static void update_src_map(struct clk_hw *hw) { struct clk_rcg2 *rcg = to_clk_rcg2(hw); int i, num_parents = clk_hw_get_num_parents(hw); for (i = 0; i < num_parents; i++) if (!rcg->parent_map[i].cfg) cxo_f.src = rcg->parent_map[i].src; } static int clk_rcg2_is_enabled(struct clk_hw *hw) { struct clk_rcg2 *rcg = to_clk_rcg2(hw); Loading Loading @@ -245,16 +255,21 @@ static unsigned long clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_rcg2 *rcg = to_clk_rcg2(hw); u32 cfg, hid_div, m = 0, n = 0, mode = 0, mask; const struct freq_tbl *f_curr; u32 cfg, src, hid_div, m = 0, n = 0, mode = 0, mask; if (rcg->enable_safe_config && !clk_hw_is_prepared(hw)) { regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); src = cfg; src &= CFG_SRC_SEL_MASK; src >>= CFG_SRC_SEL_SHIFT; if (rcg->enable_safe_config && (!clk_hw_is_prepared(hw) || !clk_hw_is_enabled(hw)) && !src) { if (!rcg->current_freq) rcg->current_freq = cxo_f.freq; return rcg->current_freq; } regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); if (rcg->mnd_width) { mask = BIT(rcg->mnd_width) - 1; regmap_read(rcg->clkr.regmap, RCG_M_OFFSET(rcg), &m); Loading @@ -267,9 +282,17 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) mode >>= CFG_MODE_SHIFT; } if (rcg->enable_safe_config && !src) { f_curr = qcom_find_freq(rcg->freq_tbl, rcg->current_freq); if (!f_curr) return -EINVAL; hid_div = f_curr->pre_div; } else { mask = BIT(rcg->hid_width) - 1; hid_div = cfg >> CFG_SRC_DIV_SHIFT; hid_div &= mask; } return calc_rate(parent_rate, m, n, mode, hid_div); } Loading Loading @@ -430,6 +453,12 @@ static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate, if (!f) return -EINVAL; /* * Set the correct source value for CXO as per * as per defined parent map. */ update_src_map(hw); /* * Return if the RCG is currently disabled. This configuration update * will happen as part of the RCG enable sequence. Loading Loading @@ -513,6 +542,12 @@ static int clk_rcg2_enable(struct clk_hw *hw) unsigned long rate; const struct freq_tbl *f; /* * Set the correct source value for CXO as per * as per defined parent map. */ update_src_map(hw); if (rcg->flags & FORCE_ENABLE_RCG) { clk_rcg2_set_force_enable(hw); return 0; Loading Loading @@ -554,6 +589,12 @@ static void clk_rcg2_disable(struct clk_hw *hw) { struct clk_rcg2 *rcg = to_clk_rcg2(hw); /* * Set the correct source value for CXO as per * as per defined parent map. */ update_src_map(hw); if (rcg->flags & FORCE_ENABLE_RCG) { clk_rcg2_clear_force_enable(hw); return; Loading