Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 432dc821 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by David Woodhouse
Browse files

mtd: cleanup Kconfig dependencies 



Remove the MTD!=n dependency since that is handled by drivers/mtd/Kconfig.
Simplify the dependency checks for mtd/chips by using if/endif blocks. Remove
all default n since that is the Kconfig default.

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: default avatarArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent 0ceacf36

drivers/mtd/chips/Kconfig

+22 −24
Original line number Diff line number Diff line 
menu "RAM/ROM/Flash chip drivers"

	depends on MTD!=n



config MTD_CFI

	tristate "Detect flash chips by Common Flash Interface (CFI) probe"
@@ -27,9 +26,10 @@ config MTD_JEDECPROBE 
config MTD_GEN_PROBE

	tristate



if MTD_GEN_PROBE



config MTD_CFI_ADV_OPTIONS

	bool "Flash chip driver advanced configuration options"

	depends on MTD_GEN_PROBE

	help

	  If you need to specify a specific endianness for access to flash

	  chips, or if you wish to reduce the size of the kernel by including
@@ -39,9 +39,10 @@ config MTD_CFI_ADV_OPTIONS 


	  If unsure, say 'N'.



if MTD_CFI_ADV_OPTIONS



choice

	prompt "Flash cmd/query data swapping"

	depends on MTD_CFI_ADV_OPTIONS

	default MTD_CFI_NOSWAP



config MTD_CFI_NOSWAP
@@ -72,7 +73,6 @@ endchoice 


config MTD_CFI_GEOMETRY

	bool "Specific CFI Flash geometry selection"

	depends on MTD_CFI_ADV_OPTIONS

	help

	  This option does not affect the code directly, but will enable

	  some other configuration options which would allow you to reduce
@@ -80,81 +80,78 @@ config MTD_CFI_GEOMETRY 
	  arrangements of CFI chips. If unsure, say 'N' and all options

	  which are supported by the current code will be enabled.



if MTD_CFI_GEOMETRY



config MTD_MAP_BANK_WIDTH_1

	bool "Support  8-bit buswidth" if MTD_CFI_GEOMETRY

	bool "Support  8-bit buswidth"

	default y

	help

	  If you wish to support CFI devices on a physical bus which is

	  8 bits wide, say 'Y'.



config MTD_MAP_BANK_WIDTH_2

	bool "Support 16-bit buswidth" if MTD_CFI_GEOMETRY

	bool "Support 16-bit buswidth"

	default y

	help

	  If you wish to support CFI devices on a physical bus which is

	  16 bits wide, say 'Y'.



config MTD_MAP_BANK_WIDTH_4

	bool "Support 32-bit buswidth" if MTD_CFI_GEOMETRY

	bool "Support 32-bit buswidth"

	default y

	help

	  If you wish to support CFI devices on a physical bus which is

	  32 bits wide, say 'Y'.



config MTD_MAP_BANK_WIDTH_8

	bool "Support 64-bit buswidth" if MTD_CFI_GEOMETRY

	default n

	bool "Support 64-bit buswidth"

	help

	  If you wish to support CFI devices on a physical bus which is

	  64 bits wide, say 'Y'.



config MTD_MAP_BANK_WIDTH_16

	bool "Support 128-bit buswidth" if MTD_CFI_GEOMETRY

	default n

	bool "Support 128-bit buswidth"

	help

	  If you wish to support CFI devices on a physical bus which is

	  128 bits wide, say 'Y'.



config MTD_MAP_BANK_WIDTH_32

	bool "Support 256-bit buswidth" if MTD_CFI_GEOMETRY

	default n

	bool "Support 256-bit buswidth"

	help

	  If you wish to support CFI devices on a physical bus which is

	  256 bits wide, say 'Y'.



config MTD_CFI_I1

	bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY

	bool "Support 1-chip flash interleave"

	default y

	help

	  If your flash chips are not interleaved - i.e. you only have one

	  flash chip addressed by each bus cycle, then say 'Y'.



config MTD_CFI_I2

	bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY

	bool "Support 2-chip flash interleave"

	default y

	help

	  If your flash chips are interleaved in pairs - i.e. you have two

	  flash chips addressed by each bus cycle, then say 'Y'.



config MTD_CFI_I4

	bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY

	default n

	bool "Support 4-chip flash interleave"

	help

	  If your flash chips are interleaved in fours - i.e. you have four

	  flash chips addressed by each bus cycle, then say 'Y'.



config MTD_CFI_I8

	bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY

	default n

	bool "Support 8-chip flash interleave"

	help

	  If your flash chips are interleaved in eights - i.e. you have eight

	  flash chips addressed by each bus cycle, then say 'Y'.



endif # MTD_CFI_GEOMETRY



config MTD_OTP

	bool "Protection Registers aka one-time programmable (OTP) bits"

	depends on MTD_CFI_ADV_OPTIONS

	select HAVE_MTD_OTP

	default n

	help

	  This enables support for reading, writing and locking so called

	  "Protection Registers" present on some flash chips.
@@ -176,9 +173,10 @@ config MTD_OTP 
	  This feature should therefore be used with extreme care. Any mistake

	  in the programming of OTP bits will waste them.



endif # MTD_CFI_ADV_OPTIONS



config MTD_CFI_INTELEXT

	tristate "Support for Intel/Sharp flash chips"

	depends on MTD_GEN_PROBE

	select MTD_CFI_UTIL

	help

	  The Common Flash Interface defines a number of different command
@@ -188,7 +186,6 @@ config MTD_CFI_INTELEXT 


config MTD_CFI_AMDSTD

	tristate "Support for AMD/Fujitsu/Spansion flash chips"

	depends on MTD_GEN_PROBE

	select MTD_CFI_UTIL

	help

	  The Common Flash Interface defines a number of different command
@@ -198,13 +195,14 @@ config MTD_CFI_AMDSTD 


config MTD_CFI_STAA

	tristate "Support for ST (Advanced Architecture) flash chips"

	depends on MTD_GEN_PROBE

	select MTD_CFI_UTIL

	help

	  The Common Flash Interface defines a number of different command

	  sets which a CFI-compliant chip may claim to implement. This code

	  provides support for one of those command sets.



endif # MTD_GEN_PROBE



config MTD_CFI_UTIL

	tristate