Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 41c192d6 authored by Paul Zhang's avatar Paul Zhang Committed by Wu Gao
Browse files

ARM: dts: msm: add cnss device tree 

Add device tree node for cnss driver for rome and TF.

CRs-Fixed: 2854222
Change-Id: I2aba055bef033b57ceae6580e1a0c0b340592dbc
parent d04eabbf

bindings/cnss/cnss-wlan.txt

+1 −0
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ provides the reserved RAM dump memory location and size. 


Required properties:

  - compatible: "qcom,cnss" for QCA6174 device

                "qcom,cnss_sdio" for TF device

                "qcom,cnss-qca6290" for QCA6290 device

                "qcom,cnss-qca6390" for QCA6390 device

                "qcom,cnss-qca6490" for QCA6490 device

qcom/sdxnightjar-cnss.dtsi

0 → 100644
+41 −0
Original line number Diff line number Diff line 


&soc {

	cnss_pcie: qcom,cnss {

		compatible = "qcom,cnss";

		wlan-en-gpio = <&tlmm_pinmux 95 0>;

		vdd-wlan-supply = <&rome_vreg>;

		vdd-wlan-xtal-supply = <&pmd9650_l5>;

		vdd-wlan-io-supply = <&pmd9650_l6>;

		vdd-wlan-xtal-aon-supply = <&pmd9650_l4>;

		qcom,notify-modem-status;

		pinctrl-names = "wlan_en_active", "wlan_en_sleep";

		pinctrl-0 = <&cnss_wlan_en_active>;

		pinctrl-1 = <&cnss_wlan_en_sleep>;

		qcom,wlan-rc-num = <0>;

		qcom,wlan-ramdump-dynamic = <0x200000>;



		qcom,msm-bus,name = "msm-cnss";

		qcom,msm-bus,num-cases = <4>;

		qcom,msm-bus,num-paths = <2>;

		qcom,msm-bus,vectors-KBps =

			<45 512 0 0>, <1 512 0 0>,

			/* Upto 200 Mbps */

			<45 512 41421 655360>, <1 512 41421 655360>,

			/* Upto 400 Mbps */

			<45 512 98572 655360>, <1 512 98572 1600000>,

			/* Upto 800 Mbps */

			<45 512 207108 1146880>, <1 512 207108 3124992>;

	};



	cnss_sdio: qcom,cnss_sdio {

		compatible = "qcom,cnss_sdio";

		subsys-name = "AR6320_SDIO";

		vdd-wlan-xtal-supply = <&pmd9650_l5>;

		vdd-wlan-io-supply = <&pmd9650_l6>;

		qcom,wlan-ramdump-dynamic = <0x200000>;

		pinctrl-names = "active", "sleep";

		pinctrl-0 = <&cnss_sdio_active>;

		pinctrl-1 = <&cnss_sdio_sleep>;

		qcom,is-antenna-shared;

	};

};

qcom/sdxnightjar-pinctrl.dtsi

+11 −0
Original line number Diff line number Diff line
@@ -1400,4 +1400,15 @@ 
		qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_1P5>;	/* Pull up 1.5 uA */

		power-source = <1>;     /* 1.8 V */

	};



	gpio@c500 { /* GPIO 6 - Rome 3.3V control */

		status = "ok";

		qcom,mode = <1>;		/* Digital output*/

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <1>;		/* Output high */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,out-strength = <1>;	/* High drive strength */

		qcom,master-en = <1>;		/* Enable GPIO */

	};

};

qcom/sdxnightjar-regulator.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -263,7 +263,7 @@ 
		regulator-name = "rome_vreg";

		startup-delay-us = <4000>;

		enable-active-high;

		gpio = <&pmd9650_gpios 6 0>;

		gpios = <&pmd9650_gpios 6 0>;

	};



	/* SD card 2.95 V supply */

qcom/sdxnightjar.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -1022,6 +1022,7 @@ 
#include "sdxnightjar-pinctrl.dtsi"

#include "sdxnightjar-ion.dtsi"

#include "sdxnightjar-blsp.dtsi"

#include "sdxnightjar-cnss.dtsi"

#include "sdxnightjar-pcie.dtsi"



&i2c_3 {