Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 40d81729 authored by sheenam monga's avatar sheenam monga Committed by Gerrit - the friendly Code Review server
Browse files

qcacmn: Add additional attributes for the QCA vendor command 

QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO to get finer details on roaming
behavior, TSF out of sync count, and the latest TX rate, Rate Index used
for the transmission.

Change-Id: I34d112a263a587603f555069c0244f61dc44ec73
CRs-Fixed: 2876411
parent ff697723

os_if/linux/qca_vendor.h

+175 −1
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2012-2020 The Linux Foundation. All rights reserved.

 * Copyright (c) 2012-2021 The Linux Foundation. All rights reserved.

 *

 * Permission to use, copy, modify, and/or distribute this software for

 * any purpose with or without fee is hereby granted, provided that the
@@ -1037,6 +1037,7 @@ enum qca_wlan_auth_type { 
 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_HE_OPERATION: Attribute type for

 * sending HE operation info.

 * @QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_AFTER_LAST: After last

 *

 */

enum qca_wlan_vendor_attr_get_station_info {

	QCA_WLAN_VENDOR_ATTR_GET_STATION_INFO_INVALID = 0,
@@ -2835,6 +2836,139 @@ enum qca_vendor_roam_triggers { 
	QCA_ROAM_TRIGGER_REASON_EXTERNAL_SCAN	= 1 << 12,

};



/*

 * enum qca_vendor_roam_fail_reasons: Defines the various roam

 * fail reasons. This enum value is used in

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON attribute.

 *

 * @QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED: Roam module in the firmware is not

 * able to trigger the scan.

 * @QCA_ROAM_FAIL_REASON_NO_AP_FOUND: No roamable APs found during roam scan.

 * @QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND: No candidate APs found during roam

 * scan.

 * @QCA_ROAM_FAIL_REASON_HOST: Roam fail due to disconnect issued from host.

 * @QCA_ROAM_FAIL_REASON_AUTH_SEND: Unable to send Authentication frame.

 * @QCA_ROAM_FAIL_REASON_AUTH_RECV: Received Authentication frame with error

 * status code.

 * @QCA_ROAM_FAIL_REASON_NO_AUTH_RESP: Authentication frame not received.

 * @QCA_ROAM_FAIL_REASON_REASSOC_SEND: Unable to send Reassociation Request

 * frame.

 * @QCA_ROAM_FAIL_REASON_REASSOC_RECV: Received Reassociation Response frame

 * with error status code.

 * @QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP: Reassociation Response frame not

 * received.

 * @QCA_ROAM_FAIL_REASON_SCAN_FAIL: Scan module not able to start scan.

 * @QCA_ROAM_FAIL_REASON_AUTH_NO_ACK: No ACK is received for Authentication

 * frame.

 * @QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP: Authentication frame is dropped

 * internally before transmission.

 * @QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK: No ACK is received for Reassociation

 * Request frame.

 * @QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP: Reassociation Request frame is

 * dropped internally.

 * @QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT: EAPOL-Key M1 is not received and

 * times out.

 * @QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND: Unable to send EAPOL-Key M2 frame.

 * @QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP: EAPOL-Key M2 frame dropped

 * internally.

 * @QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK: No ACK is received for EAPOL-Key

 * M2 frame.

 * @QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT: EAPOL-Key M3 frame is not received.

 * @QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND: Unable to send EAPOL-Key M4 frame.

 * @QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP: EAPOL-Key M4 frame dropped

 * internally.

 * @QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK: No ACK is received for EAPOL-Key M4

 * frame.

 * @QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS: Roam scan is not

 * started for final beacon miss case.

 * @QCA_ROAM_FAIL_REASON_DISCONNECT: Deauthentication or Disassociation frame

 * received from the AP during roaming handoff.

 * @QCA_ROAM_FAIL_REASON_RESUME_ABORT: Firmware roams to the AP when the Apps

 * or host is suspended and gives the indication of the last roamed AP only

 * when the Apps is resumed. If the Apps is resumed while the roaming is in

 * progress, this ongoing roaming is aborted and the last roamed AP is

 * indicated to host.

 * @QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID: WPA3-SAE invalid PMKID.

 * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT: WPA3-SAE pre-authentication times

 * out.

 * @QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL: WPA3-SAE pre-authentication fails.

 */

enum qca_vendor_roam_fail_reasons {

	QCA_ROAM_FAIL_REASON_NONE = 0,

	QCA_ROAM_FAIL_REASON_SCAN_NOT_ALLOWED = 1,

	QCA_ROAM_FAIL_REASON_NO_AP_FOUND = 2,

	QCA_ROAM_FAIL_REASON_NO_CAND_AP_FOUND = 3,

	QCA_ROAM_FAIL_REASON_HOST = 4,

	QCA_ROAM_FAIL_REASON_AUTH_SEND = 5,

	QCA_ROAM_FAIL_REASON_AUTH_RECV = 6,

	QCA_ROAM_FAIL_REASON_NO_AUTH_RESP = 7,

	QCA_ROAM_FAIL_REASON_REASSOC_SEND = 8,

	QCA_ROAM_FAIL_REASON_REASSOC_RECV = 9,

	QCA_ROAM_FAIL_REASON_NO_REASSOC_RESP = 10,

	QCA_ROAM_FAIL_REASON_SCAN_FAIL = 11,

	QCA_ROAM_FAIL_REASON_AUTH_NO_ACK = 12,

	QCA_ROAM_FAIL_REASON_AUTH_INTERNAL_DROP = 13,

	QCA_ROAM_FAIL_REASON_REASSOC_NO_ACK = 14,

	QCA_ROAM_FAIL_REASON_REASSOC_INTERNAL_DROP = 15,

	QCA_ROAM_FAIL_REASON_EAPOL_M1_TIMEOUT = 16,

	QCA_ROAM_FAIL_REASON_EAPOL_M2_SEND = 17,

	QCA_ROAM_FAIL_REASON_EAPOL_M2_INTERNAL_DROP = 18,

	QCA_ROAM_FAIL_REASON_EAPOL_M2_NO_ACK = 19,

	QCA_ROAM_FAIL_REASON_EAPOL_M3_TIMEOUT = 20,

	QCA_ROAM_FAIL_REASON_EAPOL_M4_SEND = 21,

	QCA_ROAM_FAIL_REASON_EAPOL_M4_INTERNAL_DROP = 22,

	QCA_ROAM_FAIL_REASON_EAPOL_M4_NO_ACK = 23,

	QCA_ROAM_FAIL_REASON_NO_SCAN_FOR_FINAL_BEACON_MISS = 24,

	QCA_ROAM_FAIL_REASON_DISCONNECT = 25,

	QCA_ROAM_FAIL_REASON_RESUME_ABORT = 26,

	QCA_ROAM_FAIL_REASON_SAE_INVALID_PMKID = 27,

	QCA_ROAM_FAIL_REASON_SAE_PREAUTH_TIMEOUT = 28,

	QCA_ROAM_FAIL_REASON_SAE_PREAUTH_FAIL = 29,

};



/*

 * enum qca_vendor_roam_invoke_fail_reasons: Defines the various roam

 * invoke fail reasons. This enum value is used in

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON attribute.

 *

 * @QCA_ROAM_INVOKE_STATUS_IFACE_INVALID: Invalid interface ID is passed

 * in roam invoke command.

 * @QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE: Roam offload in firmware is not

 * enabled.

 * @QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID: Connected AP profile SSID

 * length is invalid.

 * @QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW: Firmware internal roaming is already

 * in progress.

 * @QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP: Host sends the Beacon/Probe Response

 * of the AP in the roam invoke command to firmware. This reason is sent by the

 * firmware when the given AP is configured to be ignored or SSID/security

 * does not match.

 * @QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL: Roam handoff failed because of

 * firmware internal reasons.

 * @QCA_ROAM_INVOKE_STATUS_DISALLOW: Roam invoke trigger is not enabled.

 * @QCA_ROAM_INVOKE_STATUS_SCAN_FAIL: Scan start fail for roam invoke.

 * @QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL: Roam handoff start fail.

 * @QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS: Roam invoke parameters are invalid.

 * @QCA_ROAM_INVOKE_STATUS_NO_CAND_AP: No candidate AP found to roam to.

 * @QCA_ROAM_INVOKE_STATUS_ROAM_FAIL: Roam handoff failed.

 */

enum qca_vendor_roam_invoke_fail_reasons {

	QCA_ROAM_INVOKE_STATUS_NONE = 0,

	QCA_ROAM_INVOKE_STATUS_IFACE_INVALID = 1,

	QCA_ROAM_INVOKE_STATUS_OFFLOAD_DISABLE = 2,

	QCA_ROAM_INVOKE_STATUS_AP_SSID_LENGTH_INVALID = 3,

	QCA_ROAM_INVOKE_STATUS_ROAM_DISALLOW = 4,

	QCA_ROAM_INVOKE_STATUS_NON_ROAMABLE_AP = 5,

	QCA_ROAM_INVOKE_STATUS_ROAM_INTERNAL_FAIL = 6,

	QCA_ROAM_INVOKE_STATUS_DISALLOW = 7,

	QCA_ROAM_INVOKE_STATUS_SCAN_FAIL = 8,

	QCA_ROAM_INVOKE_STATUS_START_ROAM_FAIL = 9,

	QCA_ROAM_INVOKE_STATUS_INVALID_PARAMS = 10,

	QCA_ROAM_INVOKE_STATUS_NO_CAND_AP = 11,

	QCA_ROAM_INVOKE_STATUS_ROAM_FAIL = 12,



};



/**

 * enum qca_vendor_attr_roam_candidate_selection_criteria:

 *
@@ -9966,6 +10100,40 @@ enum qca_vendor_wlan_sta_guard_interval { 
 * connection failure from driver. The driver shall not include this attribute

 * in response to QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO command if there is no

 * connection failure observed in the last attempted connection.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE: u32, latest TX rate (Kbps)

 * used by the station in its last TX frame while communicating to the AP in the

 * connected state. When queried in the disconnected state, this represents the

 * rate used by the STA in the last TX frame to the AP when it was connected.

 * This attribute is used for STA mode only.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX: u32, used in STA mode only.

 * This represents the rate index used by the STA for the last TX frame to the

 * AP. When queried in the disconnected state, this gives the last RIX used by

 * the STA in the last TX frame to the AP when it was connected.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT: u32, used in STA

 * mode only. This represents the number of times the STA TSF goes out of sync

 * from the AP after the connection. If queried in the disconnected state, this

 * gives the count of TSF out of sync for the last connection.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON: u32, used in STA

 * mode only. This represents the roam trigger reason for the last roaming

 * attempted by the firmware. This can be queried either in connected state or

 * disconnected state. Each bit of this attribute represents the different

 * roam trigger reason code which are defined in enum qca_vendor_roam_triggers.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON: u32, used in STA mode

 * only. This represents the roam fail reason for the last failed roaming

 * attempt by the firmware. Different roam failure reason codes are specified

 * in enum qca_vendor_roam_fail_reasons. This can be queried either in

 * connected state or disconnected state.

 *

 * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON: u32, used in

 * STA mode only. This represents the roam invoke fail reason for the last

 * failed roam invoke. Different roam invoke failure reason codes

 * are specified in enum qca_vendor_roam_invoke_fail_reasons. This can be

 * queried either in connected state or disconnected state.

 */

enum qca_wlan_vendor_attr_get_sta_info {

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
@@ -10009,6 +10177,12 @@ enum qca_wlan_vendor_attr_get_sta_info { 
	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_MIC_ERROR_COUNT = 41,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_REPLAY_COUNT = 42,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_CONNECT_FAIL_REASON_CODE = 43,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_RATE = 44,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_RIX = 45,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TSF_OUT_OF_SYNC_COUNT = 46,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_TRIGGER_REASON = 47,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_FAIL_REASON = 48,

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ROAM_INVOKE_FAIL_REASON = 49,



	/* keep last */

	QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,