Merge "ARM: dts: msm: Add USB nodes for Yupik" (4019da04) · Commits · e / devices / android_kernel_fairphone_FP5

qcom/yupik-pinctrl.dtsi

+1 −0

Original line number	Diff line number	Diff line
		@@ -7,5 +7,6 @@
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		wakeup-parent = <&pdc>;
		};
		};

qcom/yupik-rumi.dtsi

+25 −0

Original line number	Diff line number	Diff line
		@@ -10,6 +10,31 @@
		wdog: qcom,wdt@17c10000 {
		status = "disabled";
		};

		usb_emu_phy_0: usb_emu_phy@a720000 {
		compatible = "qcom,usb-emu-phy";
		reg = <0x0a720000 0x9500>;

		qcom,emu-init-seq = <0xffff 0x4
		0xfff0 0x4
		0x100000 0x20
		0x0 0x20
		0x101f0 0x20
		0x100000 0x3c
		0x0 0x3c
		0x10060 0x3c
		0x0 0x4>;
		};

		};

		&usb0 {
		/delete-property/ extcon;
		dwc3@a600000 {
		usb-phy = <&usb_emu_phy_0>, <&usb_nop_phy>;
		maximum-speed = "high-speed";
		dr_mode = "peripheral";
		};
		};

		&ufsphy_mem {

qcom/yupik-usb.dtsi

0 → 100644

+68 −0

Original line number	Diff line number	Diff line
		#include <dt-bindings/clock/qcom,gcc-yupik.h>

		&soc {
		/* Primary USB port related controller */
		usb0: ssusb@a600000 {
		compatible = "qcom,dwc-usb3-msm";
		reg = <0xa600000 0x100000>;
		reg-names = "core_base";

		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		interrupts-extended = <&pdc 14 IRQ_TYPE_EDGE_RISING>,
		<&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
		<&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
		<&pdc 15 IRQ_TYPE_EDGE_RISING>;
		interrupt-names = "dp_hs_phy_irq", "pwr_event_irq",
		"ss_phy_irq", "dm_hs_phy_irq";
		qcom,use-pdc-interrupts;

		USB3_GDSC-supply = <&gcc_usb30_prim_gdsc>;
		clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
		<&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
		<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
		<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
		<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",
		"utmi_clk", "sleep_clk";

		resets = <&gcc GCC_USB30_PRIM_BCR>;
		reset-names = "core_reset";

		qcom,core-clk-rate = <200000000>;
		qcom,core-clk-rate-hs = <66666667>;
		qcom,num-gsi-evt-buffs = <0x3>;
		qcom,gsi-reg-offset =
		<0x0fc /* GSI_GENERAL_CFG */
		0x110 /* GSI_DBL_ADDR_L */
		0x120 /* GSI_DBL_ADDR_H */
		0x130 /* GSI_RING_BASE_ADDR_L */
		0x144 /* GSI_RING_BASE_ADDR_H */
		0x1a4>; /* GSI_IF_STS */
		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;

		dwc3@a600000 {
		compatible = "snps,dwc3";
		reg = <0xa600000 0xcd00>;
		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
		linux,sysdev_is_parent;
		snps,disable-clk-gating;
		snps,has-lpm-erratum;
		snps,hird-threshold = /bits/ 8 <0x0>;
		snps,is-utmi-l1-suspend;
		snps,dis-u1-entry-quirk;
		snps,dis-u2-entry-quirk;
		snps,dis_u2_susphy_quirk;
		snps,ssp-u3-u0-quirk;
		tx-fifo-resize;
		maximum-speed = "super-speed";
		dr_mode = "otg";
		};
		};

		usb_nop_phy: usb_nop_phy {
		compatible = "usb-nop-xceiv";
		};
		};

qcom/yupik.dtsi

+52 −0

Original line number	Diff line number	Diff line
		@@ -10,6 +10,7 @@
		#include <dt-bindings/interconnect/qcom,yupik.h>
		#include <dt-bindings/interrupt-controller/arm-gic.h>
		#include <dt-bindings/soc/qcom,ipcc.h>
		#include <dt-bindings/soc/qcom,rpmh-rsc.h>
		#include <dt-bindings/gpio/gpio.h>

		/ {
		@@ -326,6 +327,19 @@
		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
		};

		pdc: interrupt-controller@b220000 {
		compatible = "qcom,yupik-pdc";
		reg = <0xb220000 0x30000>, <0x17c000f0 0x60>;
		qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,
		<55 306 4>, <59 312 3>, <62 374 2>,
		<64 434 2>, <66 438 3>, <69 86 1>,
		<70 520 54>, <124 609 31>, <155 63 1>,
		<156 716 12>;
		#interrupt-cells = <2>;
		interrupt-parent = <&intc>;
		interrupt-controller;
		};

		wdog: qcom,wdt@17c10000 {
		compatible = "qcom,msm-watchdog";
		reg = <0x17c10000 0x1000>;
		@@ -759,6 +773,42 @@
		compatible = "qcom,yupik-epss-l3-cpu";
		#interconnect-cells = <1>;
		};

		apps_rsc: rsc@18200000 {
		label = "apps_rsc";
		compatible = "qcom,rpmh-rsc";
		reg = <0x18200000 0x10000>,
		<0x18210000 0x10000>,
		<0x18220000 0x10000>;
		reg-names = "drv-0", "drv-1", "drv-2";
		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
		<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
		qcom,tcs-offset = <0xd00>;
		qcom,drv-id = <2>;
		qcom,tcs-config = <ACTIVE_TCS 2>,
		<SLEEP_TCS 3>,
		<WAKE_TCS 3>,
		<CONTROL_TCS 0>;

		system_pm {
		compatible = "qcom,system-pm";
		};
		};

		disp_rsc: rsc@af20000 {
		label = "disp_rsc";
		compatible = "qcom,rpmh-rsc";
		reg = <0xaf20000 0x10000>;
		reg-names = "drv-0";
		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
		qcom,tcs-offset = <0x1c00>;
		qcom,drv-id = <0>;
		qcom,tcs-config = <ACTIVE_TCS 0>,
		<SLEEP_TCS 1>,
		<WAKE_TCS 1>,
		<CONTROL_TCS 0>;
		};
		};

		#include "shima-gdsc.dtsi"
		@@ -880,3 +930,5 @@
		compatible = "regulator-fixed";
		status = "ok";
		};

		#include "yupik-usb.dtsi"