Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3c83dd57 authored by Tony Lindgren's avatar Tony Lindgren Committed by Kalle Valo
Browse files

wlcore: Add support for optional wakeirq 



Now with wlcore using PM runtime, we can also add support for Linux
generic wakeirq handling for it if configured in the dts file.

The wakeirq can be configured as the second interrupt in the dts file
with interrupts-extended property where it is the padconf irq of the OOB
GPIO pin used for wlcore interrupt.

Note that eventually we should also allow configuring wlcore to use the
SDIO dat1 IRQ for wake-up, and in that case the the wakeirq should be
configured to be the padconf interrupt of the dat1 pin and not the
padconf interrupt of the OOB GPIO pin.

Cc: Eyal Reizer <eyalr@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 4e651bad

drivers/net/wireless/ti/wlcore/main.c

+26 −4
Original line number Diff line number Diff line
@@ -27,6 +27,7 @@ 
#include <linux/interrupt.h>

#include <linux/irq.h>

#include <linux/pm_runtime.h>

#include <linux/pm_wakeirq.h>



#include "wlcore.h"

#include "debug.h"
@@ -6627,13 +6628,25 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) 
	}



#ifdef CONFIG_PM

	device_init_wakeup(wl->dev, true);



	ret = enable_irq_wake(wl->irq);

	if (!ret) {

		wl->irq_wake_enabled = true;

		device_init_wakeup(wl->dev, 1);

		if (pdev_data->pwr_in_suspend)

			wl->hw->wiphy->wowlan = &wlcore_wowlan_support;

	}



	res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);

	if (res) {

		wl->wakeirq = res->start;

		wl->wakeirq_flags = res->flags & IRQF_TRIGGER_MASK;

		ret = dev_pm_set_dedicated_wake_irq(wl->dev, wl->wakeirq);

		if (ret)

			wl->wakeirq = -ENODEV;

	} else {

		wl->wakeirq = -ENODEV;

	}

#endif

	disable_irq(wl->irq);

	wl1271_power_off(wl);
@@ -6661,6 +6674,9 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) 
	wl1271_unregister_hw(wl);



out_irq:

	if (wl->wakeirq >= 0)

		dev_pm_clear_wake_irq(wl->dev);

	device_init_wakeup(wl->dev, false);

	free_irq(wl->irq, wl);



out_free_nvs:
@@ -6825,10 +6841,16 @@ int wlcore_remove(struct platform_device *pdev) 
	if (!wl->initialized)

		return 0;



	if (wl->irq_wake_enabled) {

		device_init_wakeup(wl->dev, 0);

		disable_irq_wake(wl->irq);

	if (wl->wakeirq >= 0) {

		dev_pm_clear_wake_irq(wl->dev);

		wl->wakeirq = -ENODEV;

	}



	device_init_wakeup(wl->dev, false);



	if (wl->irq_wake_enabled)

		disable_irq_wake(wl->irq);



	wl1271_unregister_hw(wl);



	pm_runtime_put_sync(wl->dev);

drivers/net/wireless/ti/wlcore/sdio.c

+12 −5
Original line number Diff line number Diff line
@@ -241,7 +241,7 @@ static const struct of_device_id wlcore_sdio_of_match_table[] = { 
	{ }

};



static int wlcore_probe_of(struct device *dev, int *irq,

static int wlcore_probe_of(struct device *dev, int *irq, int *wakeirq,

			   struct wlcore_platdev_data *pdev_data)

{

	struct device_node *np = dev->of_node;
@@ -259,6 +259,8 @@ static int wlcore_probe_of(struct device *dev, int *irq, 
		return -EINVAL;

	}



	*wakeirq = irq_of_parse_and_map(np, 1);



	/* optional clock frequency params */

	of_property_read_u32(np, "ref-clock-frequency",

			     &pdev_data->ref_clock_freq);
@@ -268,7 +270,7 @@ static int wlcore_probe_of(struct device *dev, int *irq, 
	return 0;

}

#else

static int wlcore_probe_of(struct device *dev, int *irq,

static int wlcore_probe_of(struct device *dev, int *irq, int *wakeirq,

			   struct wlcore_platdev_data *pdev_data)

{

	return -ENODATA;
@@ -280,10 +282,10 @@ static int wl1271_probe(struct sdio_func *func, 
{

	struct wlcore_platdev_data *pdev_data;

	struct wl12xx_sdio_glue *glue;

	struct resource res[1];

	struct resource res[2];

	mmc_pm_flag_t mmcflags;

	int ret = -ENOMEM;

	int irq;

	int irq, wakeirq;

	const char *chip_family;



	/* We are only able to handle the wlan function */
@@ -308,7 +310,7 @@ static int wl1271_probe(struct sdio_func *func, 
	/* Use block mode for transferring over one block size of data */

	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;



	ret = wlcore_probe_of(&func->dev, &irq, pdev_data);

	ret = wlcore_probe_of(&func->dev, &irq, &wakeirq, pdev_data);

	if (ret)

		goto out;
@@ -351,6 +353,11 @@ static int wl1271_probe(struct sdio_func *func, 
		       irqd_get_trigger_type(irq_get_irq_data(irq));

	res[0].name = "irq";



	res[1].start = wakeirq;

	res[1].flags = IORESOURCE_IRQ |

		       irqd_get_trigger_type(irq_get_irq_data(wakeirq));

	res[1].name = "wakeirq";



	ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));

	if (ret) {

		dev_err(glue->dev, "can't add resources\n");

drivers/net/wireless/ti/wlcore/wlcore.h

+2 −0
Original line number Diff line number Diff line
@@ -199,8 +199,10 @@ struct wl1271 { 
	struct wl1271_if_operations *if_ops;



	int irq;

	int wakeirq;



	int irq_flags;

	int wakeirq_flags;



	spinlock_t wl_lock;