Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3b81221a authored by Huang Rui's avatar Huang Rui Committed by Felipe Balbi
Browse files

usb: dwc3: add disscramble quirk 



This patch adds disscramble quirk, and it only needs to be enabled at fpga
board on some vendor platforms.

Signed-off-by: default avatarHuang Rui <ray.huang@amd.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 8f317b47

Documentation/devicetree/bindings/usb/dwc3.txt

+2 −0
Original line number Original line Diff line number Diff line
@@ -14,6 +14,8 @@ Optional properties: 
 - phys: from the *Generic PHY* bindings

 - phys: from the *Generic PHY* bindings

 - phy-names: from the *Generic PHY* bindings

 - phy-names: from the *Generic PHY* bindings

 - tx-fifo-resize: determines if the FIFO *has* to be reallocated.

 - tx-fifo-resize: determines if the FIFO *has* to be reallocated.

 - snps,disable_scramble_quirk: true when SW should disable data scrambling.

	Only really useful for FPGA builds.





This is usually a subnode to DWC3 glue to which it is connected.

This is usually a subnode to DWC3 glue to which it is connected.

drivers/usb/dwc3/core.c

+13 −1
Original line number Original line Diff line number Diff line
@@ -422,7 +422,6 @@ static int dwc3_core_init(struct dwc3 *dwc) 




	reg = dwc3_readl(dwc->regs, DWC3_GCTL);

	reg = dwc3_readl(dwc->regs, DWC3_GCTL);

	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;

	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;

	reg &= ~DWC3_GCTL_DISSCRAMBLE;





	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {

	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {

	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:

	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
@@ -466,6 +465,14 @@ static int dwc3_core_init(struct dwc3 *dwc) 
		dwc->is_fpga = true;

		dwc->is_fpga = true;

	}

	}





	WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga,

			"disable_scramble cannot be used on non-FPGA builds\n");



	if (dwc->disable_scramble_quirk && dwc->is_fpga)

		reg |= DWC3_GCTL_DISSCRAMBLE;

	else

		reg &= ~DWC3_GCTL_DISSCRAMBLE;



	/*

	/*

	 * WORKAROUND: DWC3 revisions <1.90a have a bug

	 * WORKAROUND: DWC3 revisions <1.90a have a bug

	 * where the device can fail to connect at SuperSpeed

	 * where the device can fail to connect at SuperSpeed
@@ -710,11 +717,16 @@ static int dwc3_probe(struct platform_device *pdev) 




		dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");

		dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");

		dwc->dr_mode = of_usb_get_dr_mode(node);

		dwc->dr_mode = of_usb_get_dr_mode(node);



		dwc->disable_scramble_quirk = of_property_read_bool(node,

				"snps,disable_scramble_quirk");

	} else if (pdata) {

	} else if (pdata) {

		dwc->maximum_speed = pdata->maximum_speed;

		dwc->maximum_speed = pdata->maximum_speed;





		dwc->needs_fifo_resize = pdata->tx_fifo_resize;

		dwc->needs_fifo_resize = pdata->tx_fifo_resize;

		dwc->dr_mode = pdata->dr_mode;

		dwc->dr_mode = pdata->dr_mode;



		dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;

	}

	}





	/* default to superspeed if no maximum_speed passed */

	/* default to superspeed if no maximum_speed passed */

drivers/usb/dwc3/core.h

+3 −0
Original line number Original line Diff line number Diff line
@@ -672,6 +672,7 @@ struct dwc3_scratchpad_array { 
 * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround

 * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround

 * @start_config_issued: true when StartConfig command has been issued

 * @start_config_issued: true when StartConfig command has been issued

 * @three_stage_setup: set if we perform a three phase setup

 * @three_stage_setup: set if we perform a three phase setup

 * @disable_scramble_quirk: set if we enable the disable scramble quirk

 */

 */

struct dwc3 {

struct dwc3 {

	struct usb_ctrlrequest	*ctrl_req;

	struct usb_ctrlrequest	*ctrl_req;
@@ -776,6 +777,8 @@ struct dwc3 { 
	unsigned		setup_packet_pending:1;

	unsigned		setup_packet_pending:1;

	unsigned		start_config_issued:1;

	unsigned		start_config_issued:1;

	unsigned		three_stage_setup:1;

	unsigned		three_stage_setup:1;



	unsigned		disable_scramble_quirk:1;

};

};





/* -------------------------------------------------------------------------- */

/* -------------------------------------------------------------------------- */

drivers/usb/dwc3/platform_data.h

+2 −0
Original line number Original line Diff line number Diff line
@@ -24,4 +24,6 @@ struct dwc3_platform_data { 
	enum usb_device_speed maximum_speed;

	enum usb_device_speed maximum_speed;

	enum usb_dr_mode dr_mode;

	enum usb_dr_mode dr_mode;

	bool tx_fifo_resize;

	bool tx_fifo_resize;



	unsigned disable_scramble_quirk:1;

};
 
};