Merge "ARM: dts: msm: STMMAC Add doc for EMAC node"

Qualcomm Technologies Inc. EMAC Gigabit Ethernet controller

This network controller consists of the MAC and

RGMII IO Macro for interfacing with PHY.

Required properties:

emac_hw node:

- compatible: Should be "qcom,emac-dwc-eqos"

- reg: Offset and length of the register regions for the mac and io-macro

- interrupts: Interrupt number used by this controller

- io-macro-info: Internal io-macro-info

- emac_emb_smmu: Internal emac smmu node

- qcom,phy-reset-delay-msecs  is for delays

	The 1st cell is reset pulse in milli seconds.

	The 2nd cell is reset post-delay in milli seconds.

Optional:

- qcom,msm-bus,name: String representing the client-name

- qcom,msm-bus,num-cases: Total number of usecases

- qcom,msm-bus,num-paths: Total number of master-slave pairs

- qcom,msm-bus,vectors-KBps: Arrays of unsigned integers representing:

                             master-id, slave-id, arbitrated bandwidth

                             in KBps, instantaneous bandwidth in KBps

qcom,bus-vector-names: specifies string IDs for the corresponding bus vectors

                       in the same order as qcom,msm-bus,vectors-KBps property.

- qcom,arm-smmu: Boolean, if present enables EMAC SMMU support in sdxpoorwills.

Internal io-macro-info:

- io-macro-bypass-mode: <0 or 1> internal or external delay configuration

- io-interface: <rgmii/mii/rmii> PHY interface used

Internal emac_emb_smmu:

- compatible: Should be "qcom,emac-smmu-embedded".

- qcom,smmu-s1-bypass: Boolean, if present S1 bypass is enabled.

- iommus: Includes the <&smmu_phandle stream_id size> pair for each context

			bank.

- qcom,iova-mapping: <starting_address size> of the smmu context bank.

Example:

soc {

	emac_hw: qcom,emac@00020000 {

			compatible = "qcom,emac-dwc-eqos";

			qcom,arm-smmu;

			reg = <0x20000 0x10000>,

				  <0x36000 0x100>;

				  <0x3D00000 0x300000>;

			reg-names = "emac-base", "rgmii-base";

			interrupts = <0 62 4>, <0 60 4>,

					<0 49 4>, <0 50 4>,

					<0 51 4>, <0 52 4>,

					<0 53 4>, <0 54 4>,

					<0 55 4>, <0 56 4>,

					<0 57 4>;

			interrupt-names = "sbd-intr", "lpi-intr",

				 "phy-intr", "tx-ch0-intr",

				 "tx-ch1-intr", "tx-ch2-intr",

				 "tx-ch3-intr", "tx-ch4-intr",

				 "rx-ch0-intr", "rx-ch1-intr",

				 "rx-ch2-intr", "rx-ch3-intr";

			qcom,msm-bus,name = "emac";

			qcom,msm-bus,num-cases = <4>;

			qcom,msm-bus,num-paths = <2>;

			qcom,msm-bus,vectors-KBps =

				<98 512 0 0>, <1 781 0 0>, /* No vote */

				<98 512 1250 0>, <1 781 0 40000>,  /* 10Mbps vote */

				<98 512 12500 0>, <1 781 0 40000>,  /* 100Mbps vote */

				<98 512 125000 0>, <1 781 0 40000>; /* 1000Mbps vote */

			qcom,bus-vector-names = "10", "100", "1000";

			clock-names = "emac_axi_clk", "emac_ptp_clk",

				"emac_rgmii_clk", "emac_slv_ahb_clk";

			qcom,phy-reset = <&tlmm 79 GPIO_ACTIVE_HIGH>;

			qcom,phy-intr-redirect = <&tlmm 124 GPIO_ACTIVE_LOW>;

			qcom,phy-reset-delay-msecs = <10 50>;

			gdsc_emac-supply = <&emac_gdsc>;

			io-macro-info {

				io-macro-bypass-mode = <0>;

				io-interface = "rgmii";

			};

			emac_emb_smmu: emac_emb_smmu {

				compatible = "qcom,emac-smmu-embedded";

				qcom,smmu-s1-bypass;

				iommus = <&apps_smmu 0x3C0 0x0>;

				qcom,iova-mapping = <0x80000000 0x40000000>;

			};

		};

}