Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2fe1bca7 authored by Vijayavardhan Vennapusa's avatar Vijayavardhan Vennapusa
Browse files

ARM: dts: msm: Add USB dtsi nodes for monaco 

Add USB dtsi nodes for monaco for USB functionality to work.

Change-Id: I35aa0c455d410e8e24d0f811c94f5e47aa1dcec4
parent 1ec72c6a

qcom/monaco-rumi.dtsi

+29 −0
Original line number Diff line number Diff line
@@ -11,6 +11,35 @@ 
		status = "disabled";

	};



	usb_emu_phy_0: usb_emu_phy@0x04f20000 {

		compatible = "qcom,usb-emu-phy";

		reg = <0x04e0e000 0x9500>;



		qcom,emu-init-seq = <0xfff0 0x4

				     0xfff3 0x4

				     0xfff0 0x4

				     0x100000 0x20

				     0x0 0x20

				     0x1e0 0x20

				     0x100000 0x3c

				     0x0 0x3c

				     0x4 0x3c

				     0x0 0x4

				     0x9 0x14>;

	};

};



&usb0 {

	dpdm-supply = <&usb_nop_phy>;

	dwc3@4e00000 {

		usb-phy = <&usb_emu_phy_0>, <&usb_nop_phy>;

		maximum-speed = "high-speed";

		dr_mode = "peripheral";

	};

};



&usb2_phy0 {

	status = "disabled";

};



&sdhc_1 {

qcom/monaco-usb.dtsi

0 → 100644
+136 −0
Original line number Diff line number Diff line 
#include <dt-bindings/clock/qcom,gcc-monaco.h>

#include <dt-bindings/interconnect/qcom,monaco.h>



&soc {

	/* Primary USB port related controller */

	usb0: hsusb@4e00000 {

		compatible = "qcom,dwc-usb3-msm";

		reg = <0x4e00000 0x100000>;

		reg-names = "core_base";



		iommus = <&apps_smmu 0x120 0x0>;

		qcom,iommu-dma = "atomic";

		qcom,iommu-dma-addr-pool = <0x90000000 0x60000000>;

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;

		dma-ranges;



		interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,

			<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;

		interrupt-names = "pwr_event_irq", "hs_phy_irq";



		clocks = <&gcc GCC_USB20_MASTER_CLK>,

			<&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,

			<&gcc GCC_SYS_NOC_USB2_PRIM_AXI_CLK>,

			<&gcc GCC_USB2_PRIM_CLKREF_CLK>,

			<&gcc GCC_USB20_SLEEP_CLK>,

			<&gcc GCC_USB20_MOCK_UTMI_CLK>;

		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",

				"xo", "sleep_clk", "utmi_clk";



		resets = <&gcc GCC_USB20_PRIM_BCR>;

		reset-names = "core_reset";



		USB3_GDSC-supply = <&gcc_usb20_prim_gdsc>;

		qcom,usb-charger;



		qcom,core-clk-rate = <60000000>;

		qcom,default-bus-vote = <2>; /* use svs bus voting */



		interconnect-names = "usb-ddr", "usb-ipa", "ddr-usb";

		interconnects = <&system_noc MASTER_USB3 &bimc SLAVE_EBI_CH0>,

				<&system_noc MASTER_USB3 &config_noc SLAVE_IPA_CFG>,

				<&bimc MASTER_AMPSS_M0 &config_noc SLAVE_USB3>;



		qcom,interconnect-values-svs = /* SVS Votes */

						<30000 70000>,

						<0 2400>,

						<0 40000>;



		qcom,num-gsi-evt-buffs = <0x3>;

		qcom,gsi-reg-offset =

			<0x0fc /* GSI_GENERAL_CFG */

			0x110 /* GSI_DBL_ADDR_L */

			0x120 /* GSI_DBL_ADDR_H */

			0x130 /* GSI_RING_BASE_ADDR_L */

			0x144 /* GSI_RING_BASE_ADDR_H */

			0x1a4>; /* GSI_IF_STS */

		qcom,dwc-usb3-msm-tx-fifo-size = <10488>;



		dwc3@4e00000 {

			compatible = "snps,dwc3";

			reg = <0x4e00000 0xcd00>;

			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;

			usb-phy = <&usb2_phy0>, <&usb_nop_phy>;

			tx-fifo-resize;

			linux,sysdev_is_parent;

			snps,disable-clk-gating;

			snps,is-utmi-l1-suspend;

			snps,dis-u1-entry-quirk;

			snps,dis-u2-entry-quirk;

			snps,dis_u2_susphy_quirk;

			snps,has-lpm-erratum;

			snps,hird-threshold = /bits/ 8 <0x0>;

			maximum-speed = "high-speed";

			dr_mode = "otg";

		};



		qcom,usbbam@0x04f04000 {

			compatible = "qcom,usb-bam-msm";

			reg = <0x04f04000 0x17000>;

			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;



			qcom,usb-bam-fifo-baseaddr = <0xc121000>;

			qcom,usb-bam-num-pipes = <4>;

			qcom,disable-clk-gating;

			qcom,usb-bam-override-threshold = <0x4001>;

			qcom,usb-bam-max-mbps-highspeed = <400>;

			qcom,reset-bam-on-connect;



			qcom,pipe0 {

				label = "hsusb-qdss-in-0";

				qcom,usb-bam-mem-type = <2>;

				qcom,dir = <1>;

				qcom,pipe-num = <0>;

				qcom,peer-bam = <0>;

				qcom,peer-bam-physical-address = <0x08064000>;

				qcom,src-bam-pipe-index = <0>;

				qcom,dst-bam-pipe-index = <0>;

				qcom,data-fifo-offset = <0x0>;

				qcom,data-fifo-size = <0x1800>;

				qcom,descriptor-fifo-offset = <0x1800>;

				qcom,descriptor-fifo-size = <0x800>;

			};

		};

	};



	/* Primary USB port related High Speed PHY */

	usb2_phy0: hsphy@1613000 {

		compatible = "qcom,usb-hsphy-snps-femto";

		reg = <0x1613000 0x120>,

			<0x01612000 0x4>;

		reg-names = "hsusb_phy_base",

			"eud_enable_reg";



		vdd-supply = <&L12A>;

		vdda18-supply = <&L14A>;

		vdda33-supply = <&L25A>;

		qcom,vdd-voltage-level = <0 904000 904000>;



		clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;

		clock-names = "ref_clk_src";



		resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;

		reset-names = "phy_reset";

		qcom,param-override-seq =

			<0x63 0x6c	/* override_x0 */

			 0xC8 0x70	/* override_x1 */

			 0x17 0x74>;	/* override x2 */

	};



	usb_nop_phy: usb_nop_phy {

		compatible = "usb-nop-xceiv";

	};



};

qcom/monaco.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -1235,6 +1235,7 @@ 
#include "monaco-qupv3.dtsi"

#include "monaco-pm.dtsi"

#include "monaco-audio.dtsi"

#include "monaco-usb.dtsi"



&qupv3_se6_2uart {

	status = "ok";