Merge branch 'qcs404-topic-revised' into arm64-for-4.21-3 (2aaa1b21) · Commits · e / devices / android_kernel_fairphone_FP5

arch/arm64/boot/dts/qcom/Makefile

+2 −0

Original line number	Diff line number	Diff line
		@@ -8,3 +8,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
		dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
		dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
		dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
		dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
		dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb

arch/arm64/boot/dts/qcom/pms405.dtsi

0 → 100644

+55 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		// Copyright (c) 2018, Linaro Limited

		#include <dt-bindings/spmi/spmi.h>
		#include <dt-bindings/input/linux-event-codes.h>

		&spmi_bus {
		pms405_0: pms405@0 {
		compatible = "qcom,spmi-pmic";
		reg = <0x0 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		pms405_gpios: gpio@c000 {
		compatible = "qcom,pms405-gpio";
		reg = <0xc000>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
		<0 0xc1 0 IRQ_TYPE_NONE>,
		<0 0xc2 0 IRQ_TYPE_NONE>,
		<0 0xc3 0 IRQ_TYPE_NONE>,
		<0 0xc4 0 IRQ_TYPE_NONE>,
		<0 0xc5 0 IRQ_TYPE_NONE>,
		<0 0xc6 0 IRQ_TYPE_NONE>,
		<0 0xc7 0 IRQ_TYPE_NONE>,
		<0 0xc8 0 IRQ_TYPE_NONE>,
		<0 0xc9 0 IRQ_TYPE_NONE>,
		<0 0xca 0 IRQ_TYPE_NONE>,
		<0 0xcb 0 IRQ_TYPE_NONE>;
		};

		pon@800 {
		compatible = "qcom,pms405-pon";
		reg = <0x0800>;
		mode-bootloader = <0x2>;
		mode-recovery = <0x1>;

		pwrkey {
		compatible = "qcom,pm8941-pwrkey";
		interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
		debounce = <15625>;
		bias-pull-up;
		linux,code = <KEY_POWER>;
		};
		};

		rtc@6000 {
		compatible = "qcom,pm8941-rtc";
		reg = <0x6000>;
		reg-names = "rtc", "alarm";
		interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
		};
		};
		};

arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts

0 → 100644

+11 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		// Copyright (c) 2018, Linaro Limited

		/dts-v1/;

		#include "qcs404-evb.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
		compatible = "qcom,qcs404-evb";
		};

arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts

0 → 100644

+11 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		// Copyright (c) 2018, Linaro Limited

		/dts-v1/;

		#include "qcs404-evb.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
		compatible = "qcom,qcs404-evb";
		};

arch/arm64/boot/dts/qcom/qcs404-evb.dtsi

0 → 100644

+188 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0
		// Copyright (c) 2018, Linaro Limited

		#include "qcs404.dtsi"
		#include "pms405.dtsi"

		/ {
		aliases {
		serial0 = &blsp1_uart2;
		};

		chosen {
		stdout-path = "serial0";
		};

		vph_pwr: vph-pwr-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-always-on;
		regulator-boot-on;
		};
		};

		&remoteproc_adsp {
		status = "ok";
		};

		&remoteproc_cdsp {
		status = "ok";
		};

		&remoteproc_wcss {
		status = "ok";
		};

		&rpm_requests {
		pms405-regulators {
		compatible = "qcom,rpm-pms405-regulators";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-l1-l2-supply = <&vreg_s5_1p35>;
		vdd-l3-l8-supply = <&vreg_s5_1p35>;
		vdd-l4-supply = <&vreg_s5_1p35>;
		vdd-l5-l6-supply = <&vreg_s4_1p8>;
		vdd-l7-supply = <&vph_pwr>;
		vdd-l9-supply = <&vreg_s5_1p35>;
		vdd-l10-l11-l12-l13-supply = <&vph_pwr>;

		vreg_s4_1p8: s4 {
		regulator-min-microvolt = <1728000>;
		regulator-max-microvolt = <1920000>;
		};

		vreg_s5_1p35: s5 {
		regulator-min-microvolt = <>;
		regulator-max-microvolt = <>;
		};

		vreg_l1_1p3: l1 {
		regulator-min-microvolt = <1240000>;
		regulator-max-microvolt = <1352000>;
		};

		vreg_l2_1p275: l2 {
		regulator-min-microvolt = <1048000>;
		regulator-max-microvolt = <1280000>;
		};

		vreg_l3_1p05: l3 {
		regulator-min-microvolt = <976000>;
		regulator-max-microvolt = <1160000>;
		};

		vreg_l4_1p2: l4 {
		regulator-min-microvolt = <1144000>;
		regulator-max-microvolt = <1256000>;
		};

		vreg_l5_1p8: l5 {
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		};

		vreg_l6_1p8: l6 {
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
		};

		vreg_l7_1p8: l7 {
		regulator-min-microvolt = <1616000>;
		regulator-max-microvolt = <3000000>;
		};

		vreg_l8_1p2: l8 {
		regulator-min-microvolt = <1136000>;
		regulator-max-microvolt = <1352000>;
		};

		vreg_l10_3p3: l10 {
		regulator-min-microvolt = <2936000>;
		regulator-max-microvolt = <3088000>;
		};

		vreg_l11_sdc2: l11 {
		regulator-min-microvolt = <2696000>;
		regulator-max-microvolt = <3304000>;
		};

		vreg_l12_3p3: l12 {
		regulator-min-microvolt = <2968000>;
		regulator-max-microvolt = <3300000>;
		};

		vreg_l13_3p3: l13 {
		regulator-min-microvolt = <3000000>;
		regulator-max-microvolt = <3300000>;
		};
		};
		};

		&sdcc1 {
		status = "ok";

		mmc-ddr-1_8v;
		bus-width = <8>;
		non-removable;

		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&sdc1_on>;
		pinctrl-1 = <&sdc1_off>;
		};

		&tlmm {
		sdc1_on: sdc1-on {
		clk {
		pins = "sdc1_clk";
		bias-disable;
		drive-strength = <16>;
		};

		cmd {
		pins = "sdc1_cmd";
		bias-pull-up;
		drive-strength = <10>;
		};

		data {
		pins = "sdc1_data";
		bias-pull-up;
		dreive-strength = <10>;
		};

		rclk {
		pins = "sdc1_rclk";
		bias-pull-down;
		};
		};

		sdc1_off: sdc1-off {
		clk {
		pins = "sdc1_clk";
		bias-disable;
		drive-strength = <2>;
		};

		cmd {
		pins = "sdc1_cmd";
		bias-pull-up;
		drive-strength = <2>;
		};

		data {
		pins = "sdc1_data";
		bias-pull-up;
		dreive-strength = <2>;
		};

		rclk {
		pins = "sdc1_rclk";
		bias-pull-down;
		};
		};
		};