Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Unverified Commit 28ff811f authored by Paul Kocialkowski's avatar Paul Kocialkowski Committed by Maxime Ripard
Browse files

ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board 



This is an H3-based board that sticks close to the reference design.

Supported features:
* UART
* DRAM
* MMC
* eMMC
* Ethernet
* USB host
* USB peripheral
* HDMI

Signed-off-by: default avatarPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
parent 9e98c678

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -1091,6 +1091,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ 
	sun8i-h3-orangepi-plus.dtb \

	sun8i-h3-orangepi-plus2e.dtb \

	sun8i-h3-orangepi-zero-plus2.dtb \

	sun8i-h3-rervision-dvk.dtb \

	sun8i-r16-bananapi-m2m.dtb \

	sun8i-r16-nintendo-nes-classic.dtb \

	sun8i-r16-nintendo-super-nes-classic.dtb \

arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts

0 → 100644
+114 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/*

 * Copyright (C) 2019 Bootlin

 * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

 */



/dts-v1/;

#include "sun8i-h3.dtsi"

#include "sunxi-common-regulators.dtsi"



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>



/ {

	model = "RerVision H3-DVK";

	compatible = "rervision,h3-dvk", "allwinner,sun8i-h3";



	aliases {

		ethernet0 = &emac;

		serial0 = &uart0;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	connector {

		compatible = "hdmi-connector";

		type = "a";



		port {

			hdmi_con_in: endpoint {

				remote-endpoint = <&hdmi_out_con>;

			};

		};

	};

};



&de {

	status = "okay";

};



&ehci1 {

	status = "okay";

};



&ehci2 {

	status = "okay";

};



&ehci3 {

	status = "okay";

};



&emac {

	phy-handle = <&int_mii_phy>;

	phy-mode = "mii";

	allwinner,leds-active-low;

	status = "okay";

};



&hdmi {

	status = "okay";

};



&hdmi_out {

	hdmi_out_con: endpoint {

		remote-endpoint = <&hdmi_con_in>;

	};

};



&mmc0 {

	bus-width = <4>;

	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */

	status = "okay";

	vmmc-supply = <&reg_vcc3v3>;

};



&mmc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_8bit_pins>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <8>;

	non-removable;

	cap-mmc-hw-reset;

	status = "okay";

};



&ohci1 {

	status = "okay";

};



&ohci2 {

	status = "okay";

};



&ohci3 {

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



&usb_otg {

	status = "okay";

	dr_mode = "peripheral";

};



&usbphy {

	status = "okay";

};