Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2738bd68 authored by Bob Copeland's avatar Bob Copeland Committed by John W. Linville
Browse files

mac80211: trivial spelling fixes 



Fix spelling and readability of a few lines of kernel doc:

    s/issueing/issuing/g
    s/approriate/appropriate/g
    s/supported by simply/supported simply by/
    s/IEEE80211_HW_BEACON_FILTERING/IEEE80211_HW_BEACON_FILTER/g

Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ff67bb86

include/net/mac80211.h

+5 −5
Original line number Diff line number Diff line
@@ -1242,8 +1242,8 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, 
 * %IEEE80211_CONF_PS flag enabled means that the powersave mode defined in

 * IEEE 802.11-2007 section 11.2 is enabled. This is not to be confused

 * with hardware wakeup and sleep states. Driver is responsible for waking

 * up the hardware before issueing commands to the hardware and putting it

 * back to sleep at approriate times.

 * up the hardware before issuing commands to the hardware and putting it

 * back to sleep at appropriate times.

 *

 * When PS is enabled, hardware needs to wakeup for beacons and receive the

 * buffered multicast/broadcast frames after the beacon. Also it must be
@@ -1264,7 +1264,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, 
 * there's data traffic and still saving significantly power in idle

 * periods.

 *

 * Dynamic powersave is supported by simply mac80211 enabling and disabling

 * Dynamic powersave is simply supported by mac80211 enabling and disabling

 * PS based on traffic. Driver needs to only set %IEEE80211_HW_SUPPORTS_PS

 * flag and mac80211 will handle everything automatically. Additionally,

 * hardware having support for the dynamic PS feature may set the
@@ -2458,7 +2458,7 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw, 
 *

 * @vif: &struct ieee80211_vif pointer from the add_interface callback.

 *

 * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTERING and

 * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and

 * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the

 * hardware is not receiving beacons with this function.

 */
@@ -2469,7 +2469,7 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); 
 *

 * @vif: &struct ieee80211_vif pointer from the add_interface callback.

 *

 * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTERING, and

 * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and

 * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver

 * needs to inform if the connection to the AP has been lost.

 *