Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2524b4a5 authored by Camera Software Integration's avatar Camera Software Integration Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: Add camera device tree for Waipio" into camera-kernel.lnx.4.0

parents 5db8e479 07d15a5e

waipio-camera-sensor-cdp.dtsi

0 → 100644
+597 −0
Original line number Diff line number Diff line 
#include <dt-bindings/clock/qcom,camcc-waipio.h>



&soc {

	led_flash_triple_rear: qcom,camera-flash@1 {

		cell-index = <1>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8350c_flash0 &pm8350c_flash1>;

		torch-source = <&pm8350c_torch0 &pm8350c_torch1>;

		switch-source = <&pm8350c_switch2>;

		status = "ok";

	};



	led_flash_triple_rear_aux2: qcom,camera-flash@2 {

		cell-index = <2>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8350c_flash0 &pm8350c_flash1>;

		torch-source = <&pm8350c_torch0 &pm8350c_torch1>;

		switch-source = <&pm8350c_switch2>;

		status = "ok";

	};



	led_flash_triple_rear_aux: qcom,camera-flash@3 {

		cell-index = <3>;

		compatible = "qcom,camera-flash";

		flash-source = <&pm8350c_flash0 &pm8350c_flash1>;

		torch-source = <&pm8350c_torch0 &pm8350c_torch1>;

		switch-source = <&pm8350c_switch2>;

		status = "ok";

	};



	qcom,cam-res-mgr {

		compatible = "qcom,cam-res-mgr";

		status = "ok";

	};

};



&cam_cci0 {

	actuator_triple_uw: qcom,actuator0 {

		cell-index = <0>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&pm8008i_l7>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2704000>;

		rgltr-max-voltage = <3000000>;

		rgltr-load-current = <103000>;

	};



	actuator_triple_tele: qcom,actuator1 {

		cell-index = <1>;

		compatible = "qcom,actuator";

		cci-master = <1>;

		cam_vaf-supply = <&pm8008i_l7>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2704000>;

		rgltr-max-voltage = <3000000>;

		rgltr-load-current = <103000>;

	};



	eeprom_tof1: qcom,eeprom0 {

		cell-index = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8008j_l3>;

		cam_vdig-supply = <&pm8350_s12>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vana-supply = <&pm8008j_l6>;

		cam_v_custom1-supply = <&pm8008j_l7>;

		regulator-names = "cam_vio", "cam_vdig",

			"cam_clk", "cam_vana", "cam_v_custom1";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 1256000 0 2800000 3000000>;

		rgltr-max-voltage = <1800000 1256000 0 2800000 3304000>;

		rgltr-load-current = <5000 680000 0 35000 15000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

			&cam_sensor_active_rst0>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

			&cam_sensor_suspend_rst0>;

		gpios = <&tlmm 100 0>,

			<&tlmm 25 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	eeprom_triple_uw: qcom,eeprom1 {

		cell-index = <1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l6>;

		cam_vdig-supply = <&pm8008i_l2>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vaf-supply = <&pm8008i_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 952000 0 2704000>;

		rgltr-max-voltage = <1800000 2896000 1144000 0 3000000>;

		rgltr-load-current = <3000 52000 257000 0 103000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_active_rst1>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_suspend_rst1>;

		gpios = <&tlmm 101 0>,

			<&tlmm 24 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	eeprom_triple_tele: qcom,eeprom3 {

		cell-index = <3>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l4>;

		cam_vdig-supply = <&pm8008i_l2>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vaf-supply = <&pm8008i_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 952000 0 2704000>;

		rgltr-max-voltage = <1800000 2896000 1144000 0 3000000>;

		rgltr-load-current = <10000 52000 140000 0 103000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				 &cam_sensor_active_rst3>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				 &cam_sensor_suspend_rst3>;

		gpios = <&tlmm 103 0>,

			<&tlmm 120 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3";

		cci-master = <1>;

		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	qcom,cam-sensor0 {

		cell-index = <7>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <0>;

		eeprom-src = <&eeprom_tof1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vdig-supply = <&pm8350_s12>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vana-supply = <&pm8008j_l6>;

		cam_v_custom1-supply = <&pm8008j_l7>;

		regulator-names = "cam_vio", "cam_vdig",

			"cam_clk", "cam_vana", "cam_v_custom1";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 1256000 0 2800000 3000000>;

		rgltr-max-voltage = <1800000 1256000 0 2800000 3304000>;

		rgltr-load-current = <5000 680000 0 35000 15000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

			&cam_sensor_active_rst0>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

			&cam_sensor_suspend_rst0>;

		gpios = <&tlmm 100 0>,

			<&tlmm 25 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	qcom,cam-sensor1 {

		cell-index = <6>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_triple_uw>;

		actuator-src = <&actuator_triple_uw>;

		led-flash-src = <&led_flash_triple_rear>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l6>;

		cam_vdig-supply = <&pm8008i_l2>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 952000 0 3008000>;

		rgltr-max-voltage = <1800000 2896000 1144000 0 3960000>;

		rgltr-load-current = <3000 52000 257000 0 7100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_active_rst1>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_suspend_rst1>;

		gpios = <&tlmm 101 0>,

			<&tlmm 24 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	qcom,cam-sensor3 {

		cell-index = <5>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <3>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_triple_tele>;

		actuator-src = <&actuator_triple_tele>;

		led-flash-src = <&led_flash_triple_rear_aux>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l4>;

		cam_vdig-supply = <&pm8008i_l2>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 952000 0 3008000>;

		rgltr-max-voltage = <1800000 2896000 1144000 0 3960000>;

		rgltr-load-current = <10000 52000 140000 0 7100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				 &cam_sensor_active_rst3>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				 &cam_sensor_suspend_rst3>;

		gpios = <&tlmm 103 0>,

			<&tlmm 120 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3";

		cci-master = <1>;

		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};

};



&cam_cci1 {

	actuator_triple_wide: qcom,actuator2 {

		cell-index = <0>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&pm8008i_l7>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2704000>;

		rgltr-max-voltage = <3000000>;

		rgltr-load-current = <103000>;

	};



	eeprom_triple_wide: qcom,eeprom2 {

		cell-index = <2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l3>;

		cam_vana1-supply = <&pm8008j_l4>;

		cam_vdig-supply = <&pm8008j_l1>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vaf-supply = <&pm8008i_l7>;

		regulator-names = "cam_vio", "cam_vana", "cam_vana1",

			"cam_vdig", "cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 1704000 1000000 0 2704000>;

		rgltr-max-voltage = <1800000 3000000 1896000 1200000 0 3000000>;

		rgltr-load-current = <4000 96000 88000 872000 0 103000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				&cam_sensor_active_rst2>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				&cam_sensor_suspend_rst2>;

		gpios = <&tlmm 102 0>,

			<&tlmm 117 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	eeprom_tof2: qcom,eeprom4 {

		cell-index = <4>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8008j_l3>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 0>;

		rgltr-max-voltage = <1800000 0>;

		rgltr-load-current = <185000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk4_active

			&cam_sensor_active_rst4>;

		pinctrl-1 = <&cam_sensor_mclk4_suspend

			&cam_sensor_suspend_rst4>;

		gpios = <&tlmm 104 0>,

			<&tlmm 119 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK4",

			"CAM_RESET4";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK4_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	eeprom_front: qcom,eeprom5 {

		cell-index = <5>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l6>;

		cam_vdig-supply = <&pm8008i_l2>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 952000 0>;

		rgltr-max-voltage = <1800000 2896000 1144000 0>;

		rgltr-load-current = <3000 52000 257000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk5_active

				 &cam_sensor_active_rst5>;

		pinctrl-1 = <&cam_sensor_mclk5_suspend

				 &cam_sensor_suspend_rst5>;

		gpios = <&tlmm 105 0>,

			<&tlmm 118 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK5",

					"CAM_RESET5";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK5_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	eeprom_aon: qcom,eeprom6 {

		cell-index = <6>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8008j_l3>;

		cam_vdig-supply = <&pm8008j_l5>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vana-supply = <&pm8008j_l2>;

		regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 0 952000>;

		rgltr-max-voltage = <1800000 2896000 0 1144000>;

		rgltr-load-current = <1120 14700 0 23800>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk6_active

				 &cam_sensor_active_rst6>;

		pinctrl-1 = <&cam_sensor_mclk6_suspend

				 &cam_sensor_suspend_rst6>;

		gpios = <&tlmm 106 0>,

			<&tlmm 108 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK6",

					"CAM_RESET6";

		cci-master = <1>;

		clocks = <&clock_camcc CAM_CC_MCLK6_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	qcom,cam-sensor2 {

		cell-index = <4>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <2>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		actuator-src = <&actuator_triple_wide>;

		eeprom-src = <&eeprom_triple_wide>;

		led-flash-src = <&led_flash_triple_rear_aux2>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l3>;

		cam_vana1-supply = <&pm8008j_l4>;

		cam_vdig-supply = <&pm8008j_l1>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_vana1",

			"cam_vdig", "cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 1704000 1000000 0 3008000>;

		rgltr-max-voltage = <1800000 3000000 1896000 1200000 0 3960000>;

		rgltr-load-current = <4000 96000 88000 872000 0 7100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				&cam_sensor_active_rst2>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				&cam_sensor_suspend_rst2>;

		gpios = <&tlmm 102 0>,

			<&tlmm 117 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	qcom,cam-sensor4 {

		cell-index = <3>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <4>;

		eeprom-src = <&eeprom_tof2>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 0>;

		rgltr-max-voltage = <1800000 0>;

		rgltr-load-current = <185000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk4_active

			&cam_sensor_active_rst4>;

		pinctrl-1 = <&cam_sensor_mclk4_suspend

			&cam_sensor_suspend_rst4>;

		gpios = <&tlmm 104 0>,

			<&tlmm 119 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK4",

			"CAM_RESET4";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK4_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	qcom,cam-sensor5 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <5>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_front>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vana-supply = <&pm8008i_l6>;

		cam_vdig-supply = <&pm8008i_l2>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 952000 0 3008000>;

		rgltr-max-voltage = <1800000 2896000 1144000 0 3960000>;

		rgltr-load-current = <3000 52000 257000 0 7100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk5_active

				 &cam_sensor_active_rst5>;

		pinctrl-1 = <&cam_sensor_mclk5_suspend

				 &cam_sensor_suspend_rst5>;

		gpios = <&tlmm 105 0>,

			<&tlmm 118 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK5",

					"CAM_RESET5";

		cci-master = <0>;

		clocks = <&clock_camcc CAM_CC_MCLK5_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};



	qcom,cam-sensor6 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <4>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_aon>;

		cam_vio-supply = <&pm8008j_l3>;

		cam_vdig-supply = <&pm8008j_l5>;

		cam_clk-supply = <&cam_cc_titan_top_gdsc>;

		cam_vana-supply = <&pm8008j_l2>;

		cam_bob-supply = <&pm8350c_bob>;

		regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",

			"cam_bob";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 2704000 0 952000 3008000>;

		rgltr-max-voltage = <1800000 2896000 0 1144000 3960000>;

		rgltr-load-current = <1120 14700 0 23800 7100000>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk6_active

				 &cam_sensor_active_rst6>;

		pinctrl-1 = <&cam_sensor_mclk6_suspend

				 &cam_sensor_suspend_rst6>;

		gpios = <&tlmm 106 0>,

			<&tlmm 108 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK6",

					"CAM_RESET6";

		cci-master = <1>;

		clocks = <&clock_camcc CAM_CC_MCLK6_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "nominal";

		clock-rates = <24000000>;

		status = "ok";

	};

};

waipio-camera-sensor-mtp.dtsi

0 → 100644
+597 −0

File added.

Preview size limit exceeded, changes collapsed.

waipio-camera.dtsi

0 → 100644
+2719 −0

File added.

Preview size limit exceeded, changes collapsed.