Merge "ARM: dts: msm: add PM7250B and SMB1394 to sdxlemur-mtp-mbb-emmc boards"

#include "sdxlemur-pmic-overlay.dtsi"

#include "pm7250b.dtsi"

#include <dt-bindings/iio/qti_power_supply_iio.h>

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

&soc {

	mbb_batterydata: qcom,battery-data {

		qcom,batt-id-range-pct = <15>;

		#include "qg-batterydata-alium-3600mah.dtsi"

	};

};

&sdhc_1 {

	status = "ok";

};

&spmi_debug_bus {

	qcom,pm7250b-debug@2 {

		compatible = "qcom,spmi-pmic";

		reg = <2 SPMI_USID>;

		#address-cells = <2>;

		#size-cells = <0>;

		qcom,can-sleep;

	};

};

&pm7250b_clkdiv {

	clocks = <&rpmhcc RPMH_CXO_CLK>;

	clock-names = "xo";

};

&pm7250b_vadc {

	charger_skin_therm {

		reg = <ADC5_AMUX_THM1_100K_PU>;

		label = "charger_skin_therm";

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

		qcom,pre-scaling = <1 1>;

	};

	conn_therm {

		reg = <ADC5_AMUX_THM3_100K_PU>;

		label = "conn_therm";

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

		qcom,pre-scaling = <1 1>;

	};

	smb1390_therm@e {

		qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_SMB1398_TEMP>;

	};

};

&pm7250b_adc_tm {

	io-channels = <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,

			<&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>;

	charger_skin_therm {

		reg = <ADC5_AMUX_THM1_100K_PU>;

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

	};

	conn_therm {

		reg = <ADC5_AMUX_THM3_100K_PU>;

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

	};

};

&thermal_zones {

	chg-skin-therm-usr {

		polling-delay-passive = <0>;

		polling-delay = <0>;

		thermal-governor = "user_space";

		thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM1_100K_PU>;

		trips {

			active-config0 {

				temperature = <125000>;

				hysteresis = <1000>;

				type = "passive";

			};

			active-config1 {

				temperature = <125000>;

				hysteresis = <1000>;

				type = "passive";

			};

		};

	};

	conn-therm-usr {

		polling-delay-passive = <0>;

		polling-delay = <0>;

		thermal-governor = "user_space";

		thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM3_100K_PU>;

		trips {

			active-config0 {

				temperature = <125000>;

				hysteresis = <1000>;

				type = "passive";

			};

			active-config1 {

				temperature = <125000>;

				hysteresis = <1000>;

				type = "passive";

			};

		};

	};

};

&pm7250b_charger {

	#io-channel-cells = <1>;

	io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>,

		      <&pm7250b_vadc ADC5_USB_IN_I>,

		      <&pm7250b_vadc ADC5_CHG_TEMP>,

		      <&pm7250b_vadc ADC5_DIE_TEMP>,

		      <&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>,

		      <&pm7250b_vadc ADC5_SBUx>,

		      <&pm7250b_vadc ADC5_VPH_PWR>,

		      <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,

		      <&pm7250b_qg PSY_IIO_RESISTANCE_ID>,

		      <&pm7250b_qg PSY_IIO_VOLTAGE_NOW>,

		      <&pm7250b_qg PSY_IIO_TEMP>,

		      <&pm7250b_qg PSY_IIO_CAPACITY>,

		      <&pm7250b_qg PSY_IIO_VOLTAGE_OCV>,

		      <&pm7250b_qg PSY_IIO_VOLTAGE_AVG>,

		      <&pm7250b_qg PSY_IIO_DEBUG_BATTERY>,

		      <&pm7250b_qg PSY_IIO_REAL_CAPACITY>,

		      <&pm7250b_qg PSY_IIO_CC_SOC>,

		      <&pm7250b_qg PSY_IIO_CURRENT_NOW>,

		      <&pm7250b_qg PSY_IIO_VOLTAGE_MAX>,

		      <&pm7250b_qg PSY_IIO_CHARGE_FULL>,

		      <&pm7250b_qg PSY_IIO_CHARGE_COUNTER>,

		      <&pm7250b_qg PSY_IIO_CYCLE_COUNT>,

		      <&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>,

		      <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>,

		      <&smb1394_div2_cp_primary PSY_IIO_PARALLEL_MODE>,

		      <&smb1394_div2_cp_primary PSY_IIO_PARALLEL_OUTPUT_MODE>,

		      <&smb1394_div2_cp_primary PSY_IIO_MIN_ICL>,

		      <&smb1394_div2_cp_primary PSY_IIO_CP_SWITCHER_EN>,

		      <&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>,

		      <&smb1394_div2_cp_primary PSY_IIO_CP_ILIM>,

		      <&smb1394_div2_cp_primary PSY_IIO_CP_DIE_TEMP>;

	io-channel-names = "usb_in_voltage",

			   "usb_in_current",

			   "chg_temp",

			   "die_temp",

			   "conn_temp",

			   "sbux_res",

			   "vph_voltage",

			   "skin_temp",

			   "resistance_id",

			   "voltage_now",

			   "temp",

			   "capacity",

			   "voltage_ocv",

			   "voltage_avg",

			   "debug_battery",

			   "real_capacity",

			   "cc_soc",

			   "current_now",

			   "voltage_max",

			   "charge_full",

			   "charge_counter",

			   "cycle_count",

			   "charge_full_design",

			   "time_to_full_now",

			   "cp_parallel_mode",

			   "cp_parallel_output_mode",

			   "cp_min_icl",

			   "cp_switcher_en",

			   "cp_enable",

			   "cp_ilim",

			   "cp_die_temp";

	qcom,battery-data = <&mbb_batterydata>;

	qcom,sec-charger-config = <1>;

	qcom,auto-recharge-soc = <98>;

	qcom,step-charging-enable;

	qcom,sw-jeita-enable;

	qcom,charger-temp-max = <800>;

	qcom,smb-temp-max = <800>;

	qcom,suspend-input-on-debug-batt;

	qcom,fcc-stepping-enable;

	qcom,fcc-step-delay-ms = <100>;

	qcom,fcc-step-size-ua = <100000>;

	qcom,thermal-mitigation = <3600000 3000000 1500000 1000000 500000>;

	qcom,smb-internal-pull-kohm = <0>;

	qcom,en-skin-therm-mitigation;

	qcom,hvdcp3-standalone-config;

	dpdm-supply = <&usb2_phy>;

	smb5_vbus: qcom,smb5-vbus {

		regulator-name = "smb5-vbus";

	};

	smb5_vconn: qcom,smb5-vconn {

		regulator-name = "smb5-vconn";

	};

};

&pm7250b_qg {

	#io-channel-cells = <1>;

	io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>,

		      <&pm7250b_vadc ADC5_BAT_ID_100K_PU>,

		      <&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>,

		      <&pm7250b_charger PSY_IIO_RECHARGE_SOC>,

		      <&pm7250b_charger PSY_IIO_FORCE_RECHARGE>,

		      <&pm7250b_charger PSY_IIO_CHARGE_DONE>,

		      <&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>;

	io-channel-names = "batt-therm",

			   "batt-id",

			   "input_current_limited",

			   "recharge_soc",

			   "force_recharge",

			   "charge_done",

			   "cp_charging_enabled";

	qcom,battery-data = <&mbb_batterydata>;

	qcom,qg-iterm-ma = <150>;

	qcom,hold-soc-while-full;

	qcom,linearize-soc;

	qcom,cl-feedback-on;

	qcom,tcss-enable;

	qcom,fvss-enable;

	qcom,fvss-vbatt-mv = <3300>;

	qcom,bass-enable;

	qcom,use-cp-iin-sns;

};

&pm7250b_pdphy {

	vdd-pdphy-supply = <&L10B>;

	vbus-supply = <&smb5_vbus>;

	vconn-supply = <&smb5_vconn>;

	#io-channel-cells = <1>;

	io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>,

		      <&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>,

		      <&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>,

		      <&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>,

		      <&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>,

		      <&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>,

		      <&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>,

		      <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>,

		      <&pm7250b_charger PSY_IIO_PR_SWAP>,

		      <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>,

		      <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>,

		      <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,

		      <&pm7250b_charger PSY_IIO_TYPEC_MODE>,

		      <&pm7250b_charger PSY_IIO_PE_START>;

	io-channel-names = "pd_active",

			   "typec_cc_orientation",

			   "connector_type",

			   "typec_power_role",

			   "pd_usb_suspend_supported",

			   "typec_src_rp",

			   "pd_in_hard_reset",

			   "pr_current_max",

			   "pr_swap",

			   "pd_voltage_min",

			   "pd_voltage_max",

			   "real_type",

			   "typec_mode",

			   "pe_start";

};

&pm7250b_gpios {

	smb_stat {

		smb_stat_default: smb_stat_default {

			pins = "gpio6";

			function = "normal";

			input-enable;

			bias-pull-up;

			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;

			power-source = <0>;

		};

	};

};

&i2c_3 {

	status = "ok";

	#include "smb1394.dtsi"

};

&smb1394 {

	interrupts = <0x2 0xc5 0x0 IRQ_TYPE_LEVEL_LOW>;

	interrupt-parent = <&spmi_bus>;

	interrupt-names = "smb1394";

	pinctrl-names = "default";

	pinctrl-0 = <&smb_stat_default>;

	status = "ok";

};

&smb1394_div2_cp_primary {

	io-channels = <&pm7250b_vadc ADC5_AMUX_THM2>,

		      <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,

		      <&pm7250b_charger PSY_IIO_ADAPTER_CC_MODE>,

		      <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>,

		      <&pm7250b_charger PSY_IIO_USB_INPUT_CURRENT_SETTLED>,

		      <&pm7250b_charger PSY_IIO_SMB_EN_MODE>,

		      <&pm7250b_charger PSY_IIO_SMB_EN_REASON>;

	io-channel-names = "die_temp",

			   "real_type",

			   "adapter_cc_mode",

			   "pd_current_max",

			   "input_current_settled",

			   "smb_en_mode",

			   "smb_en_reason";

	qcom,parallel-input-mode = <1>; /* USBIN */

	qcom,parallel-output-mode = <2>; /* VBAT */

	status = "ok";

};

&usb {

	extcon = <&pm7250b_pdphy>, <&eud>;

	#io-channel-cells = <1>;

	io-channels= <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>;

	io-channel-names = "chg_type";

};

&vbus_detect {

	status = "disabled";

};