Merge branches 'for-3.11/wacom-fixed' and 'for-3.11/wiimote' into for-linus (21796b39) · Commits · e / devices / android_kernel_fairphone_FP5

Documentation/ABI/testing/sysfs-driver-hid-wiimote

+38 −1

Original line number	Diff line number	Diff line
		@@ -12,7 +12,7 @@ Description: Make it possible to set/get current led state. Reading from it
		What: /sys/bus/hid/drivers/wiimote/<dev>/extension
		Date: August 2011
		KernelVersion: 3.2
		Contact: David Herrmann <dh.herrmann@googlemail.com>
		Contact: David Herrmann <dh.herrmann@gmail.com>
		Description: This file contains the currently connected and initialized
		extensions. It can be one of: none, motionp, nunchuck, classic,
		motionp+nunchuck, motionp+classic
		@@ -20,3 +20,40 @@ Description: This file contains the currently connected and initialized
		the official Nintendo Nunchuck extension and classic is the
		Nintendo Classic Controller extension. The motionp extension can
		be combined with the other two.
		Starting with kernel-version 3.11 Motion Plus hotplugging is
		supported and if detected, it's no longer reported as static
		extension. You will get uevent notifications for the motion-plus
		device then.

		What: /sys/bus/hid/drivers/wiimote/<dev>/devtype
		Date: May 2013
		KernelVersion: 3.11
		Contact: David Herrmann <dh.herrmann@gmail.com>
		Description: While a device is initialized by the wiimote driver, we perform
		a device detection and signal a "change" uevent after it is
		done. This file shows the detected device type. "pending" means
		that the detection is still ongoing, "unknown" means, that the
		device couldn't be detected or loaded. "generic" means, that the
		device couldn't be detected but supports basic Wii Remote
		features and can be used.
		Other strings for each device-type are available and may be
		added if new device-specific detections are added.
		Currently supported are:
		gen10: First Wii Remote generation
		gen20: Second Wii Remote Plus generation (builtin MP)
		balanceboard: Wii Balance Board

		What: /sys/bus/hid/drivers/wiimote/<dev>/bboard_calib
		Date: May 2013
		KernelVersion: 3.11
		Contact: David Herrmann <dh.herrmann@gmail.com>
		Description: This attribute is only provided if the device was detected as a
		balance board. It provides a single line with 3 calibration
		values for all 4 sensors. The values are separated by colons and
		are each 2 bytes long (encoded as 4 digit hexadecimal value).
		First, 0kg values for all 4 sensors are written, followed by the
		17kg values for all 4 sensors and last the 34kg values for all 4
		sensors.
		Calibration data is already applied by the kernel to all input
		values but may be used by user-space to perform other
		transformations.

drivers/hid/Kconfig

+17 −10

Original line number	Diff line number	Diff line
		@@ -719,22 +719,29 @@ config HID_WACOM
		Support for Wacom Graphire Bluetooth and Intuos4 WL tablets.

		config HID_WIIMOTE
		tristate "Nintendo Wii Remote support"
		tristate "Nintendo Wii / Wii U peripherals"
		depends on HID
		depends on LEDS_CLASS
		select POWER_SUPPLY
		select INPUT_FF_MEMLESS
		---help---
		Support for the Nintendo Wii Remote bluetooth device.
		Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
		devices are the Wii Remote and its extension devices, but also devices
		based on the Wii Remote like the Wii U Pro Controller or the
		Wii Balance Board.

		config HID_WIIMOTE_EXT
		bool "Nintendo Wii Remote Extension support"
		depends on HID_WIIMOTE
		default HID_WIIMOTE
		---help---
		Support for extension controllers of the Nintendo Wii Remote. Say yes
		here if you want to use the Nintendo Motion+, Nunchuck or Classic
		extension controllers with your Wii Remote.
		Support for all official Nintendo extensions is available, however, 3rd
		party extensions might not be supported. Please report these devices to:
		http://github.com/dvdhrm/xwiimote/issues

		Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
		the Wii U Gamepad) might be supported in the future. But currently
		support is limited to Bluetooth based devices.

		If unsure, say N.

		To compile this driver as a module, choose M here: the
		module will be called hid-wiimote.

		config HID_ZEROPLUS
		tristate "Zeroplus based game controller support"

drivers/hid/Makefile

+1 −4

Original line number	Diff line number	Diff line
		@@ -28,10 +28,7 @@ ifdef CONFIG_LOGIWHEELS_FF
		hid-logitech-y += hid-lg4ff.o
		endif

		hid-wiimote-y := hid-wiimote-core.o
		ifdef CONFIG_HID_WIIMOTE_EXT
		hid-wiimote-y += hid-wiimote-ext.o
		endif
		hid-wiimote-y := hid-wiimote-core.o hid-wiimote-modules.o
		ifdef CONFIG_DEBUG_FS
		hid-wiimote-y += hid-wiimote-debug.o
		endif

drivers/hid/hid-wacom.c

+13 −1

Original line number	Diff line number	Diff line
		@@ -46,6 +46,7 @@ struct wacom_data {
		__u8 battery_capacity;
		__u8 power_raw;
		__u8 ps_connected;
		__u8 bat_charging;
		struct power_supply battery;
		struct power_supply ac;
		__u8 led_selector;
		@@ -62,6 +63,7 @@ static enum power_supply_property wacom_battery_props[] = {
		POWER_SUPPLY_PROP_PRESENT,
		POWER_SUPPLY_PROP_CAPACITY,
		POWER_SUPPLY_PROP_SCOPE,
		POWER_SUPPLY_PROP_STATUS,
		};

		static enum power_supply_property wacom_ac_props[] = {
		@@ -287,6 +289,15 @@ static int wacom_battery_get_property(struct power_supply *psy,
		case POWER_SUPPLY_PROP_CAPACITY:
		val->intval = wdata->battery_capacity;
		break;
		case POWER_SUPPLY_PROP_STATUS:
		if (wdata->bat_charging)
		val->intval = POWER_SUPPLY_STATUS_CHARGING;
		else
		if (wdata->battery_capacity == 100 && wdata->ps_connected)
		val->intval = POWER_SUPPLY_STATUS_FULL;
		else
		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
		break;
		default:
		ret = -EINVAL;
		break;
		@@ -727,7 +738,8 @@ static int wacom_raw_event(struct hid_device hdev, struct hid_report report,
		if (power_raw != wdata->power_raw) {
		wdata->power_raw = power_raw;
		wdata->battery_capacity = batcap_i4[power_raw & 0x07];
		wdata->ps_connected = power_raw & 0x08;
		wdata->bat_charging = (power_raw & 0x08) ? 1 : 0;
		wdata->ps_connected = (power_raw & 0x10) ? 1 : 0;
		}

		break;

drivers/hid/hid-wiimote-core.c

+1101 −557

File changed.

Preview size limit exceeded, changes collapsed.