Merge "msm: ipa3: add new ETH PDU QMI" (1de0be8d) · Commits · e / devices / android_kernel_fairphone_FP5

include/uapi/linux/ipa_qmi_service_v01.h

+106 −0

Original line number	Diff line number	Diff line
		/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
		/*
		* Copyright (c) 2013-2021, The Linux Foundation. All rights reserved.
		*
		* Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
		*/

		/*
		@@ -52,6 +54,9 @@
		#define QMI_IPA_IPFLTR_NUM_MEQ_32_EQNS_V01 2
		#define QMI_IPA_MAX_PIPES_V01 20
		#define QMI_IPA_MAX_PER_CLIENTS_V01 64
		#define QMI_IPA_MAX_RMNET_ETH_INFO_V01 19
		#define QMI_IPA_MAX_MAC_ADDR_LEN_V01 6
		#define QMI_IPA_MAX_IPV4_ADDR_LEN_V01 4

		/*
		* Indicates presence of newly added member to support HW stats.
		@@ -113,6 +118,19 @@ enum ipa_platform_type_enum_v01 {
		/* To force a 32 bit signed enum. Do not change or use */
		};

		enum ipa_eth_hw_config_enum_v01 {
		IPA_QMI_ETH_HW_CONFIG_ENUM_MIN_ENUM_VAL_V01 = -2147483647,
		/*< To force a 32 bit signed enum. Do not change or use/
		IPA_QMI_ETH_HW_NONE_V01 = 0x00,
		/*< Ethernet Setting HW Default \n /
		IPA_QMI_ETH_HW_VLAN_IP_V01 = 0x01,
		/*< Ethernet HW VLAN+IP supported \n /
		IPA_QMI_ETH_HW_NON_VLAN_IP_V01 = 0x02,
		/*< Ethernet HW NON_VLAN+IP supported /
		IPA_QMI_ETH_HW_CONFIG_ENUM_MAX_ENUM_VAL_V01 = 2147483647
		/*< To force a 32 bit signed enum. Do not change or use/
		};

		#define QMI_IPA_PLATFORM_TYPE_LE_MHI_V01 \
		QMI_IPA_PLATFORM_TYPE_LE_MHI_V01

		@@ -538,6 +556,18 @@ struct ipa_indication_reg_req_msg_v01 {
		* message makes sense only when the QMI_IPA_INDICATION_REGISTER_REQ
		* is being originated from the master driver.
		*/

		/* Optional */
		/* Rmnet Ethernet MAC Information */
		__u8 rmnet_eth_mac_info_valid;
		/* Must be set to true if rmnet_eth_mac_info is being passed */
		__u8 rmnet_eth_mac_info;
		/* If set to TRUE, this field indicates that the client wants to
		* receive indications about embeddd rmnet_eth mac info via
		* QMI_IPA_RMNET_ETH_INFO_INDICATION. Setting this field in the request
		* message makes sense only when the QMI_IPA_INDICATION_REGISTER_REQ is
		* being originated from the master driver.
		*/
		}; /* Message */


		@@ -2559,6 +2589,7 @@ enum ipa_ic_type_enum_v01 {
		DATA_IC_TYPE_AP_V01 = 0x04,
		DATA_IC_TYPE_Q6_V01 = 0x05,
		DATA_IC_TYPE_UC_V01 = 0x06,
		DATA_IC_TYPE_ETH_V01 = 0x07,
		IPA_IC_TYPE_ENUM_MAX_VAL_V01 = IPA_INT_MAX,
		};

		@@ -2781,6 +2812,78 @@ struct ipa_move_nat_table_complt_ind_msg_v01 {
		}; /* Message */
		#define QMI_IPA_NAT_TABLE_MOVE_COMPLETE_IND_MAX_MSG_LEN_V01 7

		/*
		* Request Message; QMI request message to request for a dual-backhaul traffic
		* offloading with ethernet and WWAN and notify the eth-header
		*/
		struct ipa_eth_backhaul_info_req_msg_v01 {
		/* Mandatory */
		/* SRC MAC ADDR */
		__u8 src_mac_addr[QMI_IPA_MAX_MAC_ADDR_LEN_V01];
		/* src mac addr of eth hdr */
		/* Mandatory */
		/* DST MAC ADDR */
		__u8 dst_mac_addr[QMI_IPA_MAX_MAC_ADDR_LEN_V01];
		/* dst mac addr of eth hdr */
		/* Mandatory */
		/* IPv4 ADDR of ETH0 */
		__u32 ipv4_addr_eth0[QMI_IPA_MAX_IPV4_ADDR_LEN_V01];
		/* ipv4 addr of eth0 */
		/* Mandatory */
		/* ETH PIPE */
		__u8 eth_pipe;
		/* Specifies eth pipe for Q6 to route UL pkts for ETH backhaul */
		/* Mandatory */
		/* ACTION */
		__u8 enable;
		/* Specifies whether eth backhaul is enabled or disabled */
		}; /* Message */
		#define IPA_ETH_BACKHAUL_INFO_REQ_MSG_V01_MAX_MSG_LEN 45

		/* Response Message; to notify the status of the dual-backhaul traffic
		* offloading request using QMI_IPA_ETH_BACKHAUL_INFO_REQ
		*/
		struct ipa_eth_backhaul_info_resp_msg_v01 {
		/* Mandatory */
		/* Result Code */
		struct ipa_qmi_response_type_v01 resp;
		/*
		* Standard response type.
		* Standard response type. Contains the following data members:
		* qmi_result_type -- QMI_RESULT_SUCCESS or QMI_RESULT_FAILURE
		* qmi_error_type -- Error code. Possible error code values are
		* described in the error codes section of each message definition.
		*/
		}; /* Message */
		#define IPA_ETH_BACKHAUL_INFO_RESP_MSG_V01_MAX_MSG_LEN 7

		struct ipa_rmnet_eth_info_type_v01 {
		__u8 mac_addr[QMI_IPA_MAX_MAC_ADDR_LEN_V01];
		/* mac addr of rmnet_eth */
		__u32 mux_id;
		/* QMAP Mux ID. As a part of the QMAP protocol,
		* several data calls may be multiplexed over the same physical transport
		* channel. This identifier is used to identify one such data call.
		* The maximum value for this identifier is 255.
		*/
		}; /* Type */

		/* Indication Message; This is an indication to send rmnet ethernet information
		* for embedded wireless ethernet PDU from the modem processor to
		* the application processor
		*/
		struct ipa_rmnet_eth_info_indication_msg_v01 {
		/* Optional */
		/* Rmnet Ethernet Information */
		__u8 rmnet_eth_info_valid;
		/* Must be set to true if rmnet_eth_info is being passed */
		__u32 rmnet_eth_info_len;
		/* Must be set to # of elements in rmnet_eth_info */
		struct ipa_rmnet_eth_info_type_v01 rmnet_eth_info[QMI_IPA_MAX_RMNET_ETH_INFO_V01];
		/* Rmnet Ethernet Info array */
		}; /* Message */
		#define IPA_RMNET_ETH_INFO_INDICATION_MSG_V01_MAX_MSG_LEN 194

		/Service Message Definition/
		#define QMI_IPA_INDICATION_REGISTER_REQ_V01 0x0020
		#define QMI_IPA_INDICATION_REGISTER_RESP_V01 0x0020
		@@ -2839,6 +2942,9 @@ struct ipa_move_nat_table_complt_ind_msg_v01 {
		#define QMI_IPA_MOVE_NAT_REQ_V01 0x0046
		#define QMI_IPA_MOVE_NAT_RESP_V01 0x0046
		#define QMI_IPA_MOVE_NAT_COMPLETE_IND_V01 0x0046
		#define QMI_IPA_ETH_BACKHAUL_INFO_REQ_V01 0x0047
		#define QMI_IPA_ETH_BACKHAUL_INFO_RESP_V01 0x0047
		#define QMI_IPA_RMNET_ETH_INFO_INDICATION_V01 0x0048

		/* add for max length*/
		#define QMI_IPA_INIT_MODEM_DRIVER_REQ_MAX_MSG_LEN_V01 197